H3C IRF配置

H3C irf配置

 
SW1配置

 irf member 1 priority 20                                         堆叠前IRF1的配置

interface range Ten-GigabitEthernet 1/0/51 to Ten-GigabitEthernet 1/0/52 物理接口加入irf-port前，需shutdown

 shutdown

irf-port 1/2                                                 irf-port 逻辑口要和对方错开

 port group interface GigabitEthernet1/0/51                         物理口51直连对方51口

 port group interface GigabitEthernet1/0/52                         物理口52直连对方52口

#

interface range Ten-GigabitEthernet 1/0/51 to Ten-GigabitEthernet 1/0/52

 undo shutdown                                         重新打开物理接口

irf-port-configuration active                                  保存配置后，激活irf

SW2配置

 irf member 1 renumber 2                                 堆叠前IRF2的配置，y 继续

 irf member 1 priority 10

interface range Ten-GigabitEthernet 1/0/51 to Ten-GigabitEthernet 1/0/52 物理接口加入irf-port前，需要shutdown

 shutdown

irf-port 1/1                                                 irf-port 逻辑口要和对方错开

 port group interface GigabitEthernet1/0/51                         物理口51直连对方51口

 port group interface GigabitEthernet1/0/52                         物理口52直连对方52口

#

interface range Ten-GigabitEthernet 1/0/27 to Ten-GigabitEthernet 1/0/28

 undo shutdown                                         重新打开物理接口

irf-port-configuration active                                 保存配置后，激活irf，由于更改了slot号，需要重启

完成后IRF状态


完成后配置情况

接口状态