ABB AC 900F学习笔记120：Freelance_Engineering_Process_Stations-26

这篇文档正文部分已经学习完了，现在时该文档的附件部分。

Appendix A Hardware object data

附件A 硬件对象数据

A.1 Calling up object data

调出对象数据

When the I/O editor is selected in the main menu, the object data of the selected module can be viewed and configured. All inputs, output and diagnostic data are displayed with the name, data type and position in the parameter block (Byte = position of the first byte in the parameter block, Bit = position of the first bit in the start byte, Length = number of bits). A global variable can be assigned to each module component. For detailed information, see the Engineering Manual - System Configuration, Hardware Structure, I/O Editor.

当在主菜单选择了IO编辑器，选中模板的对象数据可以浏览和配置。所有输入，输出和诊断数据使用名字，数据类型和位置在参数块显示（字节=参数块中第一个字节的位置，位=开始字节中第一位的位置，长度=位的数量）。每一个模块组件可以分配一个全局变量。细节信息参见工程手册-系统配置，硬件结构，I/O编辑器。

 

Key for the following tables:

下表关键

Conf. 配置	yes = value can be configured by the user 是 = 用户可以配置数值 no = value is determined by the system 否 = 数值由系统决定
Acc. 访问	possible access to the user, e.g. via an OPC connection 用户可以访问，比如，通过OPC连接 RO = Read Only RO = 只读 RW = Read Write RW = 读写

 

Diagnostic data can only be read and not be configured.

诊断数据只能读取，不能配置。