Linux内核printk打印ip地址
Linux内核printk打印ip地址
https://www.kernel.org/doc/Documentation/printk-formats.txt http://elixir.free-electrons.com/linux/v4.14.1/source/Documentation/printk-formats.txt
打印时，还可以选择字节大小端顺序的比较方便
IPv4 addresses
==============
::
%pI4 1.2.3.4
%pi4 001.002.003.004
%p[Ii]4[hnbl]
For printing IPv4 dot-separated decimal addresses. The ``I4`` and ``i4``
specifiers result in a printed address with (``i4``) or without (``I4``)
leading zeros.
The additional ``h``, ``n``, ``b``, and ``l`` specifiers are used to specify
host, network, big or little endian order addresses respectively. Where
no specifier is provided the default network/big endian order is used.
Passed by reference.
IPv6 addresses
==============
::
%pI6 0001:0002:0003:0004:0005:0006:0007:0008
%pi6 00010002000300040005000600070008
%pI6c 1:2:3:4:5:6:7:8
For printing IPv6 network-order 16-bit hex addresses. The ``I6`` and ``i6``
specifiers result in a printed address with (``I6``) or without (``i6``)
colon-separators. Leading zeros are always used.
The additional ``c`` specifier can be used with the ``I`` specifier to
print a compressed IPv6 address as described by
http://tools.ietf.org/html/rfc5952
Passed by reference.
IPv4/IPv6 addresses (generic, with port, flowinfo, scope)
=========================================================
::
%pIS 1.2.3.4 or 0001:0002:0003:0004:0005:0006:0007:0008
%piS 001.002.003.004 or 00010002000300040005000600070008
%pISc 1.2.3.4 or 1:2:3:4:5:6:7:8
%pISpc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345
%p[Ii]S[pfschnbl]
For printing an IP address without the need to distinguish whether it``s
of type AF_INET or AF_INET6, a pointer to a valid ``struct sockaddr``,
specified through ``IS`` or ``iS``, can be passed to this format specifier.
The additional ``p``, ``f``, and ``s`` specifiers are used to specify port
(IPv4, IPv6), flowinfo (IPv6) and scope (IPv6). Ports have a ``:`` prefix,
flowinfo a ``/`` and scope a ``%``, each followed by the actual value.
In case of an IPv6 address the compressed IPv6 address as described by
http://tools.ietf.org/html/rfc5952 is being used if the additional
specifier ``c`` is given. The IPv6 address is surrounded by ``[``, ``]`` in
case of additional specifiers ``p``, ``f`` or ``s`` as suggested by
https://tools.ietf.org/html/draft-ietf-6man-text-addr-representation-07
In case of IPv4 addresses, the additional ``h``, ``n``, ``b``, and ``l``
specifiers can be used as well and are ignored in case of an IPv6
address.
Passed by reference.
Further examples::
%pISfc 1.2.3.4 or [1:2:3:4:5:6:7:8]/123456789
%pISsc 1.2.3.4 or [1:2:3:4:5:6:7:8]%1234567890
%pISpfc 1.2.3.4:12345 or [1:2:3:4:5:6:7:8]:12345/123456789
这个打印格式pI4的处理在 source/lib/vsprintf.c 文件里面
但旧版的内核不支持这个参数，需要使用这几个宏， 使用 NIPQUAD_FMT 来格式化
/*
* Display an IP address in readable format.
*/
#define NIPQUAD(addr) \
((unsigned char *)&addr)[0], \
((unsigned char *)&addr)[1], \
((unsigned char *)&addr)[2], \
((unsigned char *)&addr)[3]
#define NIPQUAD_FMT "%u.%u.%u.%u"
#define NIP6(addr) \
ntohs((addr).s6_addr16[0]), \
ntohs((addr).s6_addr16[1]), \
ntohs((addr).s6_addr16[2]), \
ntohs((addr).s6_addr16[3]), \
ntohs((addr).s6_addr16[4]), \
ntohs((addr).s6_addr16[5]), \
ntohs((addr).s6_addr16[6]), \
ntohs((addr).s6_addr16[7])
#define NIP6_FMT "%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x"
#define NIP6_SEQFMT "%04x%04x%04x%04x%04x%04x%04x%04x"
#if defined(__LITTLE_ENDIAN)
#define HIPQUAD(addr) \
((unsigned char *)&addr)[3], \
((unsigned char *)&addr)[2], \
((unsigned char *)&addr)[1], \
((unsigned char *)&addr)[0]
#elif defined(__BIG_ENDIAN)
#define HIPQUAD NIPQUAD
#else
#error "Please fix asm/byteorder.h"
#endif /* __LITTLE_ENDIAN */
