Non-ferrous Ore Sorting in Chinese

Non-ferrous metals non-ferrous metal, non-ferrous metals in the narrow sense, also known as non-ferrous metals, refers to all metals other than iron, manganese, chromium collectively . Generalized non-ferrous metals including non-ferrous alloys. Nonferrous alloys refers to the alloy based on a non-ferrous metals for the substrate (typically greater than 50%), adding one or several other elements .

YT -7750 jigger has the deal with amount is large, the separation efficiency is high and economic these advantages, which is suitable for Chinese low-grade non-ferrous and ferrous metal ore sorting. -7750-Type of the type and PYTA of DYTA -7750 these hydraulic radial jigging models YT - 7750 hydraulic radial jigging machine based on improvements made trial in 1985.
    
Through testing and continuous operation,The improved DYTA - 7750 and PYTA - 7750 jigging machine proved these advantages:the equipment operation is stable, normal, mechanical properties and hydraulic systems to meet the design requirements. Two transmission mode of the electromagnetic step-less speed and pulley governor instead of the original friction disc variable speed system, simplify the mechanical drive system, reliable operation; stroke of 15 mm and 25 mm jigging motion curve YT - 7750 type The Jig curve identical. Been modified after the stroke of 20 mm jigging curve remains the original jigging motion curve characteristics, improve the re-election of equipment operation stability; new design of stroke 30 mm cam expanded Jig stroke choice, better meet beneficiation requirements, the tank and improvements to the mine shafts to ensure a uniform the jigging screen surface part of pulsating flow. R domestic standard parts (not hammer crusher , ball mill ),which is conducive to the maintenance and replacement of parts and components.

JT -0. 15 Jig (aka ST multifunction jigging machine) was jointly developed by the Beijing Research Institute of Mining and Metallurgy peace gui  Mining Bureau machinery factory in November 1987 successfully. ST utility jigger, a multifunctional characteristics. Jigging pulsation curves jagged transition, sine wave, flat peak sawtooth, the screen surface of the tank, trapezoidal, rectangular, stroke 4.2-30 mm red times can be arbitrarily adjusted in the range of 60-280 r / min, sieve or sieve under the row of ore may be a can adapt to different conditions, can be used as a small concentrator or test equipment. Its main technical performance are shown in Table 3.6 -7. JT -5 sawtooth trapezoid jigger successfully developed by the Beijing General Research Institute of Mining and Metallurgy, the diaphragm is under movable taper jigger, mainly composed by two parts of the tank and transmission machinery.