Structural features of magnetic separator

CTB-φ1050 mm x 2100 mm permanent-magnet cylindrical type separator is composed by the permanent magnet cylinder, tank, rack, gear, mineral boxes, major components of the concentrate washing device, the adjusting device of the magnetic system and concentrates box . (1) the tube skin of permanent-magnet cylinder ,it is made of 4 mm thick non-magnetic stainless steel plate, both ends of the copper flange support by non-magnetic aluminum alloy end caps on the spindle of the permanent magnet cylinder. In order to prevent the cylinder surface wear, and strengthen the role of strong magnetic minerals carrying Simplified wheat flour hung l layer thickness of the wear-resistant rubber. (2) magnetic system. Beijing Mining Research Institute of Experimental Factory production is 85 mm × 65 mm × l7 mm. Residual magnetic flux density (B)> 3600 Gauss, the coercivity (H) = 2 200 2 500 Auster, the maximum energy product (BH) m. ≥ (3.0-3.2) xl06 Gaussian Oster strontium ferrite magnets. The eight magnetic blocks dubbed height is 136 mm single drop of magnetic charge and magnetic measuring the average surface field strength should be more than 159.2 mT, and Synthesis of 260 mm × 170 mm x136 mm of magnetic and eight off the magnetic viscosity and assembled into a 5-pole alternating magnetic system with the magnetic pole the gap between Canadian retorted magnetic blocks. Loaded into the magnetic system, with CT2 Gaussian measuring magnetic field characteristics.
Away from the pole surface of IO mm (cylindrical surface) ,the average field strength is 169.1 mT above. 60mm at the average field strength away from the pole face still 89.5 mT ,and The cylindrical surface of a higher field strength, magnetic great depth is a major feature of the magnetic properties is CTB-φ1050 mm x2100 mm permanent magnet drum magnetic separator, and to improve the processing capability of separator to improve the sorting indicators laid the base. Non-magnetic stainless steel plate and a small amount of ordinary steel plate welded. Loose state of suspension, the slurry from the bottom of the tank into the sub-constituency.  pulp gives the direction of movement of the magnetic direction of the constituency, the mineral particles can reach the surface of the magnetic high cylinder. Rack is Welded with channel steel,which used to support permanent magnet cylinder, tank and gear. The adopted  Gear is Y132M. -6 Motor,which is directly connected JZQ - 350 reducer, reducer directly connected with the permanent magnet cylinder transmission,the transmission  is reliable .
 
 

 

 

 

Mobile impact crusher : http://www.hxjqcrusher.com/crusher/Mobile-crusher-station.html
Ball mills : http://www.crusher-export.com/ball_mill.htm
 

Cement mill : http://www.best-crushers.com/cement-plant.html
cone crusher : http://www.best-crushers.com/conecrusher.htm