kernel_1_1

first.c

 1 #pragma once
 2 
 3 #ifdef __cplusplus
 4 extern "C" {
 5 #endif
 6 
 7 #include <ntddk.h>
 8 
 9 #ifdef __cplusplus
10 }
11 #endif
12 
13 DRIVER_INITIALIZE DriverEntry;
14 DRIVER_UNLOAD DriverUnload;
15 
16 #pragma code_seg("INIT")
17 EXTERN_C NTSTATUS DriverEntry( IN PDRIVER_OBJECT pDriverObject,
18                       IN PUNICODE_STRING pRegisterPath )
19 {
20     DbgPrint("first: Hello World!\r\n");
21 
22     pDriverObject->DriverUnload = DriverUnload;
23     return STATUS_SUCCESS;
24 }
25 
26 #pragma code_seg("PAGE")
27 VOID DriverUnload( PDRIVER_OBJECT DriverObject )
28 {
29     DbgPrint("first: Our driver is unloading...\r\n");
30 }

makefile

#
# DO NOT EDIT THIS FILE!!!  Edit .\sources. if you want to add a new source
# file to this component.  This file merely indirects to the real make file
# that is shared by all the driver components of the Windows NT DDK
#

!INCLUDE $(NTMAKEENV)\makefile.def

sources

1 TARGETNAME=first
2 TARGETTYPE=DRIVER
3 TARGETPATH=obj
4 SOURCES=..\first.c

我推荐你用CMD编译 当然你可以使用IDE

VisualStdio 6.0 sp6的Project Setting设置如下

C/C++ Tab

/nologo /Gz /MLd /W3 /WX /Z7 /Od
/D WIN32=100 /D _X86_=1 /D WINVER=0x500 /D DBG=1 
/Fo"Check" /Fd"Check" /FD /c

Link Tab

ntoskrnl.lib /nologo /base:"0x10000" /stack:0x400000,0x1000
/entry:"DriverEntry" /subsystem:console /incremental:no
/pdb:"Check/first.pdb" /pdbtype:sept
/subsystem:native /driver
/SECTION:INIT, D /RELEASE /IGNORE:4078

你需要一个软件用来安装NT式驱动 Open之后点选GO/STOP就好

名称 Debug Monitor

版权 Compuware Corporation - NuMega Lab

它是 DriverStudio 的一个组件,　　需要 dbgmsgcfg.dll 支持运行

还需要一个软件用来显示内核信息 因为内核并不会有控制台或消息框

名称 Dbgview

特别注意 Capture -> Capture Kernel 必须勾选

你可以在 Device Manager 的 Non-Plug and Play Drivers(隐cang)

看到你的这个设备 当然 非即插即用设备是隐cang的　　// 程序猿要回避zheng_zhi...

所以 View -> 显示隐cang的设备 必须勾选

posted @ 2011-09-17 22:18  airzack  阅读(165)  评论(0)    收藏  举报