H3C配置7

7、VLAN配置 
[Quidway]vlan 3                                  ；创建VLAN 
[Quidway-vlan3]port ethernet 0/1 to ethernet 0/4 ；在VLAN中增加端口 
配置基于access的VLAN 
[Quidway-Ethernet0/2]port access vlan 3          ；当前端口加入到VLAN          
注意：缺省情况下，端口的链路类型为Access类型，所有Access端口均属于且只属于VLAN1 
配置基于trunk的VLAN 
[Quidway-Ethernet0/2]port link-type trunk                          ；设置当前端口为trunk 
[Quidway-Ethernet0/2]port trunk permit vlan {ID|All}    ；设trunk允许的VLAN             
注意：所有端口缺省情况下都是允许VLAN1的报文通过的 
[Quidway-Ethernet0/2]port trunk pvid vlan 3    ；设置trunk端口的PVID 
配置基于Hybrid端口的VLAN 
[Quidway-Ethernet0/2]port link-type hybrid    ;配置端口的链路类型为Hybrid类型 
[Quidway-Ethernet0/2]port hybrid vlan vlan-id-list { tagged | untagged };允许指定的VLAN通过当前Hybrid端口 
注意：缺省情况下，所有Hybrid端口只允许VLAN1通过 
[Quidway-Ethernet0/2]port hybrid pvid vlan vlan-id ;设置Hybrid端口的缺省VLAN                                    
注意：缺省情况下，Hybrid端口的缺省VLAN为VLAN1 
VLAN描述 
[Quidway]description string                      ；指定VLAN描述字符 
[Quidway]description                         ；删除VLAN描述字符 
[Quidway]display vlan [vlan_id]                            ；查看VLAN设置 
私有VLAN配置 
[SwitchA-vlanx]isolate-user-vlan enable          ；设置主vlan 
[SwitchA]Isolate-user-vlan <x> secondary <list>    ；设置主vlan包括的子vlan 
[Quidway-Ethernet0/2]port hybrid pvid vlan <id>    ；设置vlan的pvid 
[Quidway-Ethernet0/2]port hybrid pvid             ；删除vlan的pvid 
[Quidway-Ethernet0/2]port hybrid vlan vlan_id_list untagged ；设置无标识的vlan 
如果包的vlan id与PVId一致，则去掉vlan信息. 默认PVID=1。 
所以设置PVID为所属vlan id, 设置可以互通的vlan为untagged.