suse 12 二进制部署 Kubernetets 1.19.7 - 第02章 - 部署etcd集群

 

文章目录

 

1.2、部署etcd集群

  • 所有master节点需要etcd（复用master节点，也可以独立三节点部署etcd，只要kubernetes集群可以访问即可）
1.2.0、下载etcd二进制文件
k8s-01:~ # cd /opt/k8s/packages/
k8s-01:/opt/k8s/packages # wget https://github.com/etcd-io/etcd/releases/download/v3.4.12/etcd-v3.4.12-linux-amd64.tar.gz
k8s-01:/opt/k8s/packages # tar xf etcd-v3.4.12-linux-amd64.tar.gz
1.2.1、创建etcd证书和私钥
k8s-01:~ # cd /opt/k8s/ssl
k8s-01:/opt/k8s/ssl # cat > etcd-csr.json <<EOF
{
  "CN": "etcd",
  "hosts": [
    "127.0.0.1",
    "192.168.72.39",
    "192.168.72.40",
    "192.168.72.41"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "ShangHai",
      "L": "ShangHai",
      "O": "k8s",
      "OU": "bandian"
    }
  ]
}
EOF
  • host字段指定授权使用该证书的etcd节点IP或域名列表，需要将etcd集群的3个节点都添加其中
1.2.2、生成etcd证书和私钥
k8s-01:/opt/k8s/ssl # cfssl gencert -ca=/opt/k8s/ssl/ca.pem \
-ca-key=/opt/k8s/ssl/ca-key.pem \
-config=/opt/k8s/ssl/ca-config.json \
-profile=kubernetes etcd-csr.json | cfssljson -bare etcd
1.2.3、配置etcd为systemctl管理
k8s-01:~ # cd /opt/k8s/conf/
k8s-01:/opt/k8s/conf # source /opt/k8s/bin/k8s-env.sh
k8s-01:/opt/k8s/conf # cat > etcd.service.template <<EOF
[Unit]
Description=Etcd Server
After=network.target
After=network-online.target
Wants=network-online.target
Documentation=https://github.com/coreos
[Service]
Type=notify
WorkingDirectory=${ETCD_DATA_DIR}
ExecStart=/opt/k8s/bin/etcd \\
  --data-dir=${ETCD_DATA_DIR} \\
  --wal-dir=${ETCD_WAL_DIR} \\
  --name=##NODE_NAME## \\
  --cert-file=/etc/etcd/cert/etcd.pem \\
  --key-file=/etc/etcd/cert/etcd-key.pem \\
  --trusted-ca-file=/etc/kubernetes/cert/ca.pem \\
  --peer-cert-file=/etc/etcd/cert/etcd.pem \\
  --peer-key-file=/etc/etcd/cert/etcd-key.pem \\
  --peer-trusted-ca-file=/etc/kubernetes/cert/ca.pem \\
  --peer-client-cert-auth \\
  --client-cert-auth \\
  --listen-peer-urls=https://##NODE_IP##:2380 \\
  --initial-advertise-peer-urls=https://##NODE_IP##:2380 \\
  --listen-client-urls=https://##NODE_IP##:2379,http://127.0.0.1:2379 \\
  --advertise-client-urls=https://##NODE_IP##:2379 \\
  --initial-cluster-token=etcd-cluster-0 \\
  --initial-cluster=${ETCD_NODES} \\
  --initial-cluster-state=new \\
  --auto-compaction-mode=periodic \\
  --auto-compaction-retention=1 \\
  --max-request-bytes=33554432 \\
  --quota-backend-bytes=6442450944 \\
  --heartbeat-interval=250 \\
  --election-timeout=2000 \\
  --enable-v2=true
Restart=on-failure
RestartSec=5
LimitNOFILE=65536
[Install]
WantedBy=multi-user.target
EOF
  • WorkDirectory、--data-dir 指定etcd工作目录和数据存储为${ETCD_DATA_DIR},需要在启动前创建这个目录 (后面会有创建步骤)
  • --wal-dir 指定wal目录，为了提高性能，一般使用SSD和–data-dir不同的盘
  • --name 指定节点名称，当–initial-cluster-state值为new时，–name的参数值必须位于–initial-cluster列表中
  • --cert-file、--key-file etcd server与client通信时使用的证书和私钥
  • --trusted-ca-file 签名client证书的CA证书，用于验证client证书
  • --peer-cert-file、--peer-key-file etcd与peer通信使用的证书和私钥
  • --peer-trusted-ca-file 签名peer证书的CA证书，用于验证peer证书
1.2.4、分发etcd证书和启动文件到其他etcd节点
#!/usr/bin/env bash
source /opt/k8s/bin/k8s-env.sh

for (( i=0; i < 3; i++ ))
do
    sed -e "s/##NODE_NAME##/${MASTER_NAMES[i]}/" \
        -e "s/##NODE_IP##/${ETCD_IPS[i]}/" \
        /opt/k8s/conf/etcd.service.template > /opt/k8s/conf/etcd-${ETCD_IPS[i]}.service
done

for host in ${ETCD_IPS[@]}
do
    printf "\e[1;34m${host}\e[0m\n"
    scp /opt/k8s/packages/etcd-v3.4.12-linux-amd64/etcd* ${host}:/opt/k8s/bin/
    scp /opt/k8s/conf/etcd-${host}.service ${host}:/etc/systemd/system/etcd.service
    scp /opt/k8s/ssl/etcd*.pem ${host}:/etc/etcd/cert/
done
1.2.5、配置并启动etcd服务
#!/usr/bin/env bash
source /opt/k8s/bin/k8s-env.sh

for host in ${ETCD_IPS[@]}
do
    printf "\e[1;34m${host}\e[0m\n"
    ssh root@${host} "mkdir -p ${ETCD_DATA_DIR} ${ETCD_WAL_DIR}"
    ssh root@${host} "chmod 700 ${ETCD_DATA_DIR}"
    ssh root@${host} "systemctl daemon-reload && \
                      systemctl enable etcd && \
                      systemctl restart etcd && \
                      systemctl status etcd | grep Active"
done
  • 如果第一个回显是failed，先别着急取消，若后面两个节点的回显是running就没有问题了，这是集群的机制，如下显示是正常的
192.168.72.39
Created symlink from /etc/systemd/system/multi-user.target.wants/etcd.service to /etc/systemd/system/etcd.service.
Job for etcd.service failed because a timeout was exceeded. See "systemctl status etcd.service" and "journalctl -xe" for details.
192.168.72.40
Created symlink from /etc/systemd/system/multi-user.target.wants/etcd.service to /etc/systemd/system/etcd.service.
   Active: active (running) since Sat 2021-02-13 00:27:24 CST; 16ms ago
192.168.72.41
Created symlink from /etc/systemd/system/multi-user.target.wants/etcd.service to /etc/systemd/system/etcd.service.
   Active: active (running) since Sat 2021-02-13 00:27:25 CST; 6ms ago
1.2.6、验证etcd集群状态
  • 在k8s-01机器执行就可以了，既然是集群，在哪执行，都是可以获取到信息的
#!/usr/bin/env bash
source /opt/k8s/bin/k8s-env.sh

for host in ${ETCD_IPS[@]}
do
    printf "\e[1;34m${host}\e[0m\n"
    ETCDCTL_API=3 /opt/k8s/bin/etcdctl \
    --endpoints=https://${host}:2379 \
    --cacert=/etc/kubernetes/cert/ca.pem \
    --cert=/etc/etcd/cert/etcd.pem \
    --key=/etc/etcd/cert/etcd-key.pem endpoint health
done
  • 如下显示successfully committed proposal则表示集群正常
192.168.72.39
https://192.168.72.39:2379 is healthy: successfully committed proposal: took = 9.402229ms
192.168.72.40
https://192.168.72.40:2379 is healthy: successfully committed proposal: took = 10.247073ms
192.168.72.41
https://192.168.72.41:2379 is healthy: successfully committed proposal: took = 11.01422ms
posted @ 2021-02-14 00:01  月巴左耳东  阅读(149)  评论(0)    收藏  举报