Spring中的REST错误处理

前言

这篇文章介绍了在Spring中的对于REST的几种错误处理。

正文

Error Handling for REST with Spring

1. Overview

This article will illustrate how to implement Exception Handling with Spring for a REST API. We’ll also get a bit of historical overview and see which new options the different versions introduced.

Before Spring 3.2, the two main approaches to handling exceptions in a Spring MVC application were: HandlerExceptionResolver or the @ExceptionHandler annotation. Both of these have some clear downsides.

在Spring 3.2 之前，在Spring MVC应用程序中的异常处理方法有两种：HandlerExceptionResolver 和 @ExceptionHandler。

Since 3.2 we’ve had the @ControllerAdvice annotation to address the limitations of the previous two solutions and to promote a unified exception handling throughout a whole application.

在 3.2 之后，就有了 @ControllerAdvice。

Now, Spring 5 introduces the ResponseStatusException class: A fast way for basic error handling in our REST APIs.

Spring 5 引入了 ResponseStatusException 类，这个对于 REST APIs 就更加方便了。

All of these do have one thing in common – they deal with the separation of concerns very well. The app can throw exception normally to indicate a failure of some kind – exceptions which will then be handled separately.

Finally, we’ll see what Spring Boot brings to the table, and how we can configure it to suit our needs.

Further reading:

Custom Error Message Handling for REST API

Implement a Global Exception Handler for a REST API with Spring.

Read more →

Guide to Spring Data REST Validators

Quick and practical guide to Spring Data REST Validators

Read more →

Spring MVC Custom Validation

Learn how to build a custom validation annotation and use it in Spring MVC.

Read more →

2. Solution 1 – The Controller level @ExceptionHandler

controller 级别的 @ExceptionHandler。

The first solution works at the @Controller level – we will define a method to handle exceptions, and annotate that with @ExceptionHandler:

1 2 3 4 5 6 7 8

public class FooController{           //...     @ExceptionHandler({ CustomException1.class, CustomException2.class })     public void handleException() {         //     } }

This approach has a major drawback – the @ExceptionHandler annotated method is only active for that particular Controller, not globally for the entire application. Of course, adding this to every controller makes it not well suited for a general exception handling mechanism.

We can work around this limitation by having all Controllers extend a Base Controller class – however, this can be a problem for applications where, for whatever reason, this isn’t possible. For example, the Controllers may already extend from another base class which may be in another jar or not directly modifiable, or may themselves not be directly modifiable.

Next, we’ll look at another way to solve the exception handling problem – one that is global and doesn’t include any changes to existing artifacts such as Controllers.

3. Solution 2 – The HandlerExceptionResolver

The second solution is to define an HandlerExceptionResolver – this will resolve any exception thrown by the application. It will also allow us to implement a uniform exception handling mechanism in our REST API.

Before going for a custom resolver, let’s go over the existing implementations.

3.1. ExceptionHandlerExceptionResolver

This resolver was introduced in Spring 3.1 and is enabled by default in the DispatcherServlet. This is actually the core component of how the @ExceptionHandler mechanism presented earlier works.

3.2. DefaultHandlerExceptionResolver

This resolver was introduced in Spring 3.0, and it’s enabled by default in the DispatcherServlet. It’s used to resolve standard Spring exceptions to their corresponding HTTP Status Codes, namely Client error – 4xxand Server error – 5xx status codes. Here’s the full list of the Spring Exceptions it handles, and how they map to status codes.

While it does set the Status Code of the Response properly, one limitation is that it doesn’t set anything to the body of the Response. And for a REST API – the Status Code is really not enough information to present to the Client – the response has to have a body as well, to allow the application to give additional information about the failure.

This can be solved by configuring view resolution and rendering error content through ModelAndView, but the solution is clearly not optimal. That’s why Spring 3.2 introduced a better option that we’ll discuss in a later section.

3.3. ResponseStatusExceptionResolver

This resolver was also introduced in Spring 3.0 and is enabled by default in the DispatcherServlet. Its main responsibility is to use the @ResponseStatus annotation available on custom exceptions and to map these exceptions to HTTP status codes.

Such a custom exception may look like:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

@ResponseStatus(value = HttpStatus.NOT_FOUND) public class MyResourceNotFoundException extends RuntimeException {     public MyResourceNotFoundException() {         super();     }     public MyResourceNotFoundException(String message, Throwable cause) {         super(message, cause);     }     public MyResourceNotFoundException(String message) {         super(message);     }     public MyResourceNotFoundException(Throwable cause) {         super(cause);     } }

Same as the DefaultHandlerExceptionResolver, this resolver is limited in the way it deals with the body of the response – it does map the Status Code on the response, but the body is still null.

3.4. SimpleMappingExceptionResolver and AnnotationMethodHandlerExceptionResolver

The SimpleMappingExceptionResolver has been around for quite some time – it comes out of the older Spring MVC model and is not very relevant for a REST Service. We basically use it to map exception class names to view names.

The AnnotationMethodHandlerExceptionResolver was introduced in Spring 3.0 to handle exceptions through the @ExceptionHandler annotation but has been deprecated by ExceptionHandlerExceptionResolver as of Spring 3.2.

3.5. Custom HandlerExceptionResolver

The combination of DefaultHandlerExceptionResolver and ResponseStatusExceptionResolver goes a long way towards providing a good error handling mechanism for a Spring RESTful Service. The downside is – as mentioned before – no control over the body of the response.

Ideally, we’d like to be able to output either JSON or XML, depending on what format the client has asked for (via the Accept header).

This alone justifies creating a new, custom exception resolver:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

@Component public class RestResponseStatusExceptionResolver extends AbstractHandlerExceptionResolver {       @Override     protected ModelAndView doResolveException       (HttpServletRequest request, HttpServletResponse response, Object handler, Exception ex) {         try {             if (ex instanceof IllegalArgumentException) {                 return handleIllegalArgument((IllegalArgumentException) ex, response, handler);             }             ...         } catch (Exception handlerException) {             logger.warn("Handling of [" + ex.getClass().getName() + "]               resulted in Exception", handlerException);         }         return null;     }       private ModelAndView handleIllegalArgument       (IllegalArgumentException ex, HttpServletResponse response) throws IOException {         response.sendError(HttpServletResponse.SC_CONFLICT);         String accept = request.getHeader(HttpHeaders.ACCEPT);         ...         return new ModelAndView();     } }

One detail to notice here is that we have access to the request itself, so we can consider the value of the Accept header sent by the client.

For example, if the client asks for application/json then, in the case of an error condition, we’d want to make sure we return a response body encoded with application/json.

The other important implementation detail is that we return a ModelAndView – this is the body of the response and it will allow us to set whatever is necessary on it.

This approach is a consistent and easily configurable mechanism for the error handling of a Spring REST Service. It does, however, have limitations: it’s interacting with the low-level HtttpServletResponse and it fits into the old MVC model which uses ModelAndView – so there’s still room for improvement.

4. Solution 3 – @ControllerAdvice

使用 @ControllerAdvice 注解，统一处理异常。

Spring 3.2 brings support for a global @ExceptionHandler with the @ControllerAdvice annotation. This enables a mechanism that breaks away from the older MVC model and makes use of ResponseEntity along with the type safety and flexibility of @ExceptionHandler:

1 2 3 4 5 6 7 8 9 10 11 12 13

@ControllerAdvice public class RestResponseEntityExceptionHandler   extends ResponseEntityExceptionHandler {       @ExceptionHandler(value       = { IllegalArgumentException.class, IllegalStateException.class })     protected ResponseEntity<Object> handleConflict(       RuntimeException ex, WebRequest request) {         String bodyOfResponse = "This should be application specific";         return handleExceptionInternal(ex, bodyOfResponse,           new HttpHeaders(), HttpStatus.CONFLICT, request);     } }

The@ControllerAdvice annotation allows us to consolidate our multiple, scattered @ExceptionHandlers from before into a single, global error handling component.

The actual mechanism is extremely simple but also very flexible. It gives us:

• Full control over the body of the response as well as the status code
• Mapping of several exceptions to the same method, to be handled together, and
• It makes good use of the newer RESTful ResposeEntity response

One thing to keep in mind here is to match the exceptions declared with @ExceptionHandler with the exception used as the argument of the method. If these don’t match, the compiler will not complain – no reason it should, and Spring will not complain either.

However, when the exception is actually thrown at runtime, the exception resolving mechanism will fail with:

1 2	java.lang.IllegalStateException: No suitable resolver for argument [0] [type=...] HandlerMethod details: ...

5. Solution 4 – ResponseStatusException (Spring 5 and Above)

这个对于 REST APIs 就更加方便了，直接构造了返回体。

Spring 5 introduced the ResponseStatusException class. We can create an instance of it providing an HttpStatus and optionally a reason  and a cause:

1 2 3 4 5 6 7 8 9 10 11 12 13

@GetMapping(value = "/{id}") public Foo findById(@PathVariable("id") Long id, HttpServletResponse response) {     try {         Foo resourceById = RestPreconditions.checkFound(service.findOne(id));           eventPublisher.publishEvent(new SingleResourceRetrievedEvent(this, response));         return resourceById;      }     catch (MyResourceNotFoundException exc) {          throw new ResponseStatusException(            HttpStatus.NOT_FOUND, "Foo Not Found", exc);     } }

What are the benefits of using ResponseStatusException?

• Excellent for prototyping: We can implement a basic solution quite fast
• One type, multiple status codes: One exception type can lead to multiple different responses. This reduces tight coupling compared to the @ExceptionHandler
• We won’t have to create as many custom exception classes
• More control over exception handling since the exceptions can be created programmatically

And what about the tradeoffs?

• There’s no unified way of exception handling: It’s more difficult to enforce some application-wide conventions, as opposed to @ControllerAdvice which provides a global approach
• Code duplication: We may find ourselves replicating code in multiple controllers

We should also note that it’s possible to combine different approaches within one application.

For example, we can implement a @ControllerAdvice globally, but also ResponseStatusExceptions locally. However, we need to be careful: If the same exception can be handled in multiple ways, we may notice some surprising behavior. A possible convention is to handle one specific kind of exception always in one way.

For more details and further examples, see our tutorial on ResponseStatusException.

6. Handle the Access Denied in Spring Security

The Access Denied occurs when an authenticated user tries to access resources that he doesn’t have enough authorities to access.

6.1. MVC – Custom Error Page

First, let’s look at the MVC style of the solution and see how to customize an error page for Access Denied:

The XML configuration:

1 2 3 4 5

<http>     <intercept-url pattern="/admin/*" access="hasAnyRole('ROLE_ADMIN')"/>       ...     <access-denied-handler error-page="/my-error-page" /> </http>

And the Java configuration:

1 2 3 4 5 6 7 8

@Override protected void configure(HttpSecurity http) throws Exception {     http.authorizeRequests()         .antMatchers("/admin/*").hasAnyRole("ROLE_ADMIN")         ...         .and()         .exceptionHandling().accessDeniedPage("/my-error-page"); }

When users try to access a resource without having enough authorities, they will be redirected to “/my-error-page“.

6.2. Custom AccessDeniedHandler

Next, let’s see how to write our custom AccessDeniedHandler:

1 2 3 4 5 6 7 8 9 10

@Component public class CustomAccessDeniedHandler implements AccessDeniedHandler {       @Override     public void handle       (HttpServletRequest request, HttpServletResponse response, AccessDeniedException ex)       throws IOException, ServletException {         response.sendRedirect("/my-error-page");     } }

And now let’s configure it using XML Configuration:

1 2 3 4 5

<http>     <intercept-url pattern="/admin/*" access="hasAnyRole('ROLE_ADMIN')"/>     ...     <access-denied-handler ref="customAccessDeniedHandler" /> </http>

Or using Java Configuration:

1 2 3 4 5 6 7 8 9 10 11

@Autowired private CustomAccessDeniedHandler accessDeniedHandler;   @Override protected void configure(HttpSecurity http) throws Exception {     http.authorizeRequests()         .antMatchers("/admin/*").hasAnyRole("ROLE_ADMIN")         ...         .and()         .exceptionHandling().accessDeniedHandler(accessDeniedHandler) }

Note how – in our CustomAccessDeniedHandler, we can customize the response as we wish by redirecting or display a custom error message.

6.3. REST and Method Level Security

Finally, let’s see how to handle method level security @PreAuthorize, @PostAuthorize, and @Secure Access Denied.

We’ll, of course, use the global exception handling mechanism that we discussed earlier to handle the AccessDeniedException as well:

1 2 3 4 5 6 7 8 9 10 11 12 13

@ControllerAdvice public class RestResponseEntityExceptionHandler   extends ResponseEntityExceptionHandler {       @ExceptionHandler({ AccessDeniedException.class })     public ResponseEntity<Object> handleAccessDeniedException(       Exception ex, WebRequest request) {         return new ResponseEntity<Object>(           "Access denied message here", new HttpHeaders(), HttpStatus.FORBIDDEN);     }           ... }

7. Spring Boot Support

Spring Boot provides an ErrorController implementation to handle errors in a sensible way.

In a nutshell, it serves a fallback error page for browsers (aka the Whitelabel Error Page), and a JSON response for RESTful, non HTML requests:

1 2 3 4 5 6 7

{     "timestamp": "2019-01-17T16:12:45.977+0000",     "status": 500,     "error": "Internal Server Error",     "message": "Error processing the request!",     "path": "/my-endpoint-with-exceptions" }

As usual, Spring Boot allows configuring these features with properties:

• server.error.whitelabel.enabled: can be used to disable the Whitelabel Error Page and rely on the servlet container to provide an HTML error message
• server.error.include-stacktrace: with an always value, it includes the stacktrace in both the HTML and the JSON default response

Apart from these properties, we can provide our own view-resolver mapping for /error, overriding the Whitelabel Page.

We can also customize the attributes that we want to show in the response by including an ErrorAttributes bean in the context. We can extend the DefaultErrorAttributes class provided by Spring Boot to make things easier:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

@Component public class MyCustomErrorAttributes extends DefaultErrorAttributes {       @Override     public Map<String, Object> getErrorAttributes(WebRequest webRequest, boolean includeStackTrace) {         Map<String, Object> errorAttributes = super.getErrorAttributes(webRequest, includeStackTrace);         errorAttributes.put("locale", webRequest.getLocale()             .toString());         errorAttributes.remove("error");           //...           return errorAttributes;     } }

If we want to go further and define (or override) how the application will handle errors for a particular content type, we can register an ErrorController bean.

Again, we can make use of the default BasicErrorController provided by Spring Boot to help us out.

For example, imagine we want to customize how our application handles errors triggered in XML endpoints. All we have to do is define a public method using the @RequestMapping and stating it produces application/xml media type:

1 2 3 4 5 6 7 8 9 10 11 12 13 14

@Component public class MyErrorController extends BasicErrorController {       public MyErrorController(ErrorAttributes errorAttributes) {         super(errorAttributes, new ErrorProperties());     }       @RequestMapping(produces = MediaType.APPLICATION_XML_VALUE)     public ResponseEntity<Map<String, Object>> xmlError(HttpServletRequest request) {               // ...       } }

8. Conclusion

This tutorial discussed several ways to implement an exception handling mechanism for a REST API in Spring, starting with the older mechanism and continuing with the Spring 3.2 support and into 4.x and 5.x.

As always, the code presented in this article is available over on Github.

For the Spring Security-related code, you can check the spring-security-rest module.

参考

https://www.baeldung.com/exception-handling-for-rest-with-spring