一、获取安装包

http://zlib.net/zlib-1.2.11.tar.gz 

https://www.openssl.org/source/openssl-1.0.2e.tar.gz (openssl的版本必须在1.0.2e及以上)

http://nginx.org/download/nginx-1.10.3.tar.gz   (nginx的版本必须在1.9.5以上)

二、解压三个包到相同目录编译nginx

 ./configure --prefix=/usr/local/nginx --with-openssl=../openssl-1.0.2e --with-pcre --with-zlib=../zlib-1.2.11 --with-stream --with-stream_ssl_module --with-http_ssl_module --with-http_v2_module --with-threads 
make
make install

三、配置运行

配置nginx伪证书、配置文件中开启https即可

步骤1: 到需要放置证书的目录(选在nginx的conf目录下就可以),建立服务器的私钥(此过程需输入密码短语)

openssl genrsa -des3 -out server.key 1024

步骤2: 创建证书签名请求csr

openssl req -new -key server.key -out server.csr

步骤3:对于使用上面私钥启动具有ssl功能的nginx,有必要移除输出的密码

cp server.key server.key.org
openssl rsa -in server.key.org -out server.key

步骤4: 使用上面的私钥和CSR对证书进行签名

openssl x509 -req -days 365 -in server.csr -signkey server.key -out server.crt

步骤5:配置nginx

    server {
        listen       443 ssl http2;
        server_name  localhost;

        ssl_certificate     server.crt;
        ssl_certificate_key  server.key;

        location / {
            #add_header 'Access-Control-Allow-Origin' '*';
            add_header 'Access-Control-Allow-Headers' 'X-Requested-With';
            add_header 'Access-Control-Allow-Methods' 'GET,POST,OPTIONS';
            proxy_pass http://127.0.0.1:80;
       }

    }

步骤6:启动nginx并用firefox浏览器访问

(firefox浏览器的版本必须在35以上,并且在"about:config"中开启了"network.http.spdy.enabled.http2draft"选项)

访问后查看报文,协议版本是否为HTTP 2.0和firefox是否插入了自己的头"X-Firefox-Spdy:"

当然如果到这成功的话,事情也就结束了,偏偏我连升了3次fireforx的版本,都在35以上,最后升级到52版本,然并卵,"about:config"中只有"network.http.spdy.enabled.http2"这一项,而且还是开启的。但是访问的时候,查看请求头,依然是HTTP1.1。谷歌也是一样不行。来不及怀疑人生,只能换curl试试。

四、curl模拟HTTP2.0请求

1. 下载源码安装包

nghttp2:https://codeload.github.com/nghttp2/nghttp2/zip/master

curl: https://curl.haxx.se/download/curl-7.53.1.tar.gz

2. 安装http2

yum install install git g++ make binutils autoconf automake autotools-dev libtool pkg-config zlib1g-dev libcunit1-dev libssl-dev libxml2-dev libev-dev libevent-dev libjansson-dev libjemalloc-dev cython python3-dev python-setuptools
unzip nghttp2-master.zip
cd nghttp2-master
autoreconf -i
automake
autoconf
./configure
make
sudo make install

3. 安装curl

https://curl.haxx.se/download/curl-7.53.1.tar.gz
tar -zxvf curl-7.53.1.tar.gz
cd curl-7.53.1
./configure --with-nghttp2=/usr/local --with-ssl
make

4. 验证

[root@localhost src]# ./curl --version
curl 7.53.1 (x86_64-pc-linux-gnu) libcurl/7.53.1 OpenSSL/1.0.1e zlib/1.2.7 nghttp2/1.22.0-DEV
Protocols: dict file ftp ftps gopher http https imap imaps pop3 pop3s rtsp smb smbs smtp smtps telnet tftp 
Features: IPv6 Largefile NTLM NTLM_WB SSL libz HTTP2 UnixSockets HTTPS-proxy 

红色字体说明curl已经支持HTTP2和HTTPS,然后到curl的程序目录,执行,查看nginx是否支持http2;

cd src
./curl --http2 -v https://192.168.0.1/a.jpg -k

日志太多,但是中间会有一行"Using HTTP2, server supports multi-use"说明是用了http2的;

在nginx的access.log中也可以看见访问记录为"GET /a.jpg HTTP/2.0" 200 18082 "-" "curl/7.53.1"也可以说明是用的HTTP2.0

最后我用常用的搜狗浏览器访问"https://192.168.0.1/a.jpg"发现使用的也是HTTP2.0,但是搜狗浏览器的F12里面并没显示这个请求头,nginx的日志中可以看见。

五、参考网址

http://wiki.jikexueyuan.com/project/http-2-explained/firefox.html

https://my.oschina.net/leicc/blog/601293?p={{totalPage}}

http://www.linuxidc.com/Linux/2016-01/127588.htm

posted on 2017-03-27 19:36  步孤天  阅读(33436)  评论(0编辑  收藏  举报