51单片机程序框架之按键单击

/******************************************************************************
此程序是依据吴坚鸿程序框架，在普中51 A2单片机开发板上的程序练习
程序目标：按键单击，Key1按下，LED灯亮，Key2按下LED灭
*******************************************************************************/

include<REG51.H>

define Main_Fosc 12000000L //默认系统时钟12Mhz

define T1MS (65536-Main_Fosc/12/1000) //12分频下1ms定时器的装载值，n=t/T=t/(12/f)=0.001*f/12=f/12/1000

define Key_Filter_CNT 40 //按键debounce time

sbit LED=P2^0;
sbit Key1=P3^1;
sbit Key2=P3^0;
unsigned char Key_Handle=0; //按键值，没有按下时，默认为0
void Sys_Init(); //系统初始化
void Delay_Long(); //长延时，等待系统稳定
void Perpherial_Init(); //端口初始化
void Key_Scan(); //按键扫描函数
void Key_Service(); //按键响应函数

void main()
{
Sys_Init();
Delay_Long();
Perpherial_Init();
while (1)
{
Key_Service();
}

}

void Sys_Init()
{
TMOD=0X01; //定时器0模式1
TL0=T1MS;
TH0=T1MS>>8;
}

void Delay_Long()
{
unsigned char i,j;
for(i=0;i++;i<220)
{
for(j=0;j<220;j++)
;
}
}

void Perpherial_Init()
{
ET0=1;
TR0=1;
EA=1;
}

void Timer0_ISR() interrupt 1 //定时器0中断函数
{
TL0=T1MS;
TH0=T1MS>>8;
Key_Scan();
}

void Key_Scan()
{
static unsigned int Key1_cnt;
static unsigned char Key1_Lock;
static unsigned char Key2_Lock;
static unsigned int Key2_Cnt;

if (0!=Key1)
{
    Key1_cnt=0;
    Key1_Lock=0;
}
else if (0==Key1_Lock)
{
    Key1_cnt++;
    if (Key1_cnt>=Key_Filter_CNT)
    {
        Key_Handle=1;
        Key1_Lock=1;
    }
    
}

if (0!=Key2)
{
    Key2_Cnt=0;
    Key2_Lock=0;
}
else if (0==Key2_Lock)
{
    Key2_Cnt++;
    if (Key2_Cnt>=Key_Filter_CNT)
    {
        Key2_Lock=1;
        Key_Handle=2;
    }
    
} 

}

void Key_Service()
{
if (0==Key_Handle)
{
return;
}

switch (Key_Handle)
{
case 1:
    LED=0;
    Key_Handle=0;
    break;
case 2:
    LED=1;
    Key_Handle=0;
    break;
}

}