ubontu 16 下的 pylon5 安装

想用wine，然后走了很多弯路。后来发现正确的安装和配置pylon即可。注意32位和64位不可以混淆。

If you choose to install in a different directory,
you'll have to modify the directory names accordingly.
Note: Root permissions are needed to write to /opt.

To install the pylon 5 Camera Software Suite in /opt/pylon5
follow these steps:

  1. Change to the directory which contains this INSTALL file, e.g.:
       cd ~/pylon-5.0.0.1234-x86

  2. Extract the corresponding SDK into /opt
       sudo tar -C /opt -xzf pylonSDK*.tar.gz

  3. Install udev-rules to set up permissions for basler USB cameras
       ./setup-usb.sh

  4. Unplug and replug all USB cameras to get the udev rules applied.

  5. Execute /opt/pylon5/bin/PylonViewerApp to test your cameras.