Java NIO系列教程(七) FileChannel

Java NIO系列教程(七) FileChannel

Java NIO 中的 FileChannel 是一个连接到文件的通道。可以通过文件通道读写文件。

FileChannel 无法设置为非阻塞模式,它总是运行在阻塞模式下。

一、打开 FileChannel

在使用 FileChannel 之前,必须先打开它。但是,我们无法直接打开一个 FileChannel,需要通过使用一个 InputStream、OutputStream 或 RandomAccessFile 来获取一个 FileChannel 实例。下面是通过 RandomAccessFile 打开 FileChannel 的示例:

RandomAccessFile aFile = new RandomAccessFile("data/nio-data.txt", "rw");
FileChannel inChannel = aFile.getChannel();

二、从 FileChannel 读取数据

调用多个 read() 方法之一从 FileChannel 中读取数据。如:

ByteBuffer buf = ByteBuffer.allocate(48);
int bytesRead = inChannel.read(buf);

首先,分配一个 Buffer。从 FileChannel 中读取的数据将被读到 Buffer 中。

然后,调用 FileChannel.read() 方法。该方法将数据从 FileChannel 读取到 Buffer 中。read() 方法返回的 int 值表示了有多少字节被读到了 Buffer 中。如果返回 -1,表示到了文件末尾。

三、向 FileChannel 写数据

使用 FileChannel.write() 方法向 FileChannel 写数据,该方法的参数是一个 Buffer。如:

String newData = "New String to write to file..." + System.currentTimeMillis();

ByteBuffer buf = ByteBuffer.allocate(48);
buf.clear();
buf.put(newData.getBytes());

buf.flip();

while(buf.hasRemaining()) {
    channel.write(buf);
}

注意 FileChannel.write() 是在 while 循环中调用的。因为无法保证 write() 方法一次能向 FileChannel 写入多少字节,因此需要重复调用 write() 方法,直到 Buffer 中已经没有尚未写入通道的字节。

四、关闭 FileChannel

用完 FileChannel 后必须将其关闭。如:

channel.close();

五、FileChannel 的 position 方法

有时可能需要在 FileChannel 的某个特定位置进行数据的读/写操作。可以通过调用 position() 方法获取 FileChannel 的当前位置。

也可以通过调用 position(long pos) 方法设置 FileChannel 的当前位置。

这里有两个例子:

long pos = channel.position();
channel.position(pos +123);

如果将位置设置在文件结束符之后,然后试图从文件通道中读取数据,读方法将返回 -1 —— 文件结束标志。

如果将位置设置在文件结束符之后,然后向通道中写数据,文件将撑大到当前位置并写入数据。这可能导致“文件空洞”,磁盘上物理文件中写入的数据间有空隙。

六、FileChannel 的 size 方法

FileChannel 实例的 size() 方法将返回该实例所关联文件的大小。如:

long fileSize = channel.size();

七、FileChannel 的 truncate 方法

可以使用 FileChannel.truncate() 方法截取一个文件。截取文件时,文件将中指定长度后面的部分将被删除。如:

channel.truncate(1024);

这个例子截取文件的前 1024 个字节。

八、FileChannel 的 force 方法

FileChannel.force() 方法将通道里尚未写入磁盘的数据强制写到磁盘上。出于性能方面的考虑,操作系统会将数据缓存在内存中,所以无法保证写入到 FileChannel 里的数据一定会即时写到磁盘上。要保证这一点,需要调用 force() 方法。

force() 方法有一个 boolean 类型的参数,指明是否同时将文件元数据(权限信息等)写到磁盘上。

下面的例子同时将文件数据和元数据强制写到磁盘上:

channel.force(true);

转载自并发编程网 – ifeve.com,本文链接地址: Java NIO系列教程(七) FileChannel

posted on 2018-11-18 12:34  binarylei  阅读(556)  评论(0编辑  收藏  举报

导航