实验11IRF

实验任务一：配置IRF堆叠

1. 建立物理连接
   

2．配置IRF堆叠
[SWA]int Ten-GigabitEthernet 1/0/49
[SWA-Ten-GigabitEthernet1/0/49]shutdown
[SWA]irf-port 1/1
[SWA-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/49
[SWA]int Ten-GigabitEthernet1/0/49
[SWA-Ten-GigabitEthernet1/0/49]undo shutdown
[SWA]irf-port-configuration active
[SWA]irf member 1 renumber 1
Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y
[SWA]%Jun 1 16:01:53:520 2018 SWA STM/6/STM_LINK_UP: IRF port 1 came up.
reboot

[SWB]int Ten-GigabitEthernet 1/0/49
[SWB-Ten-GigabitEthernet1/0/49]shutdown
[SWB]irf-port 1/2
[SWB-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/49
[SWB]int Ten-GigabitEthernet1/0/49
[SWB-Ten-GigabitEthernet1/0/49]undo shutdown
[SWB]irf-port-configuration active
[SWB]irf member 1 renumber 2
Renumbering the member ID may result in configuration change or loss. Continue?[Y/N]:y
[SWA]%Jun 1 16:01:53:520 2018 SWA STM/6/STM_LINK_UP: IRF port 1 came up.
reboot

3．基本配置
[NEW_DEVICE]vlan 100 to 101
[NEW_DEVICE]int vlan 100
[NEW_DEVICE-Vlan-interface100]ip ad 192.168.255.1 30
[NEW_DEVICE-Vlan-interface100]int vlan 101
[NEW_DEVICE-Vlan-interface101]ip ad 192.168.255.5 30

[NEW_DEVICE]int rang ge 1/0/1 to ge 1/0/2
[NEW_DEVICE-if-range]port link-type trunk
[NEW_DEVICE-if-range]port trunk permit vlan all

[NEW_DEVICE]int rang ge 2/0/1 to ge 2/0/2
[NEW_DEVICE-if-range]port link-type trunk
[NEW_DEVICE-if-range]port trunk permit vlan all

配置SWD：
[SWD-Vlan-interface101]ip ad 192.168.255.6 30
[SWD-Vlan-interface101]int vlan 20
[SWD-Vlan-interface20]ip ad 10.0.0.254 24
[SWD]int rang ge 1/0/1 to ge 1/0/2
[SWD-if-range]port link-type trunk
[SWD-if-range]port trunk permit vlan all
[SWD-GigabitEthernet1/0/3]port access vlan 20

配置SWC
[SWC]vlan 10
[SWC-vlan10]port GigabitEthernet 1/0/3
[SWC-vlan10]int vlan 10
[SWC-Vlan-interface10]ip ad 192.168.0.254 24
[SWC-Vlan-interface10]vlan 100
[SWC-vlan100]int vlan 100
[SWC-Vlan-interface100]ip ad 192.168.255.2 30
[SWC]int rang ge 1/0/1 to ge 1/0/2
[SWC-if-range]port link-type trunk
[SWC-if-range]port trunk permit vlan all

[HostA-GigabitEthernet0/0]ip ad 192.168.0.1 24
[HostB-GigabitEthernet0/0]ip ad 10.0.0.1 24

[NEW_DEVICE]rip 1
[NEW_DEVICE-rip-1]v 2
[NEW_DEVICE-rip-1]u s
[NEW_DEVICE-rip-1]network 192.168.255.0

[SWC-if-range]rip 1
[SWC-rip-1]v 2
[SWC-rip-1]u s
[SWC-rip-1]network 192.168.0.0
[SWC-rip-1]network 192.168.255.0

[SWD]rip
[SWD-rip-1]u s
[SWD-rip-1]v 2
[SWD-rip-1]network 192.168.255.0
[SWD-rip-1]network 10.0.0.0

4.检查IRF堆叠特性
//显示irf成员和角色
[NEW_DEVICE]display irf
MemberID Role Priority CPU-Mac Description
*+1 Master 1 085a-3bbb-0304 ---
2 Standby 1 085a-40ad-0404 ---

• indicates the device is the master.

• indicates the device through which the user logs in.

The bridge MAC of the IRF is: 085a-3bbb-0300
Auto upgrade : yes
Mac persistent : 6 min
Domain ID : 0
//显示相连的端口
[NEW_DEVICE]display irf configuration
MemberID NewID IRF-Port1 IRF-Port2
1 1 Ten-GigabitEthernet1/0/49 disable
2 2 disable Ten-GigabitEthernet2/0/49
[NEW_DEVICE]display irf topology
Topology Info

           IRF-Port1                IRF-Port2          

MemberID Link neighbor Link neighbor Belong To
2 DIS --- UP 1 085a-3bbb-0304
1 UP 2 DIS --- 085a-3bbb-0304
//Irf-port 1 表示逻辑口1，port 2 表示逻辑口2

5.测试连接堆叠设备线路断了
一台堆叠设备会变成2台，且各自都为Master.