网络流(最大流) POJ 1637 Sightseeing tour

Sightseeing tour
Time Limit: 1000MS   Memory Limit: 10000K
Total Submissions: 8628   Accepted: 3636

Description

The city executive board in Lund wants to construct a sightseeing tour by bus in Lund, so that tourists can see every corner of the beautiful city. They want to construct the tour so that every street in the city is visited exactly once. The bus should also start and end at the same junction. As in any city, the streets are either one-way or two-way, traffic rules that must be obeyed by the tour bus. Help the executive board and determine if it's possible to construct a sightseeing tour under these constraints.

Input

On the first line of the input is a single positive integer n, telling the number of test scenarios to follow. Each scenario begins with a line containing two positive integers m and s, 1 <= m <= 200,1 <= s <= 1000 being the number of junctions and streets, respectively. The following s lines contain the streets. Each street is described with three integers, xi, yi, and di, 1 <= xi,yi <= m, 0 <= di <= 1, where xi and yi are the junctions connected by a street. If di=1, then the street is a one-way street (going from xi to yi), otherwise it's a two-way street. You may assume that there exists a junction from where all other junctions can be reached.

Output

For each scenario, output one line containing the text "possible" or "impossible", whether or not it's possible to construct a sightseeing tour.

Sample Input

4
5 8
2 1 0
1 3 0
4 1 1
1 5 0
5 4 1
3 4 0
4 2 1
2 2 0
4 4
1 2 1
2 3 0
3 4 0
1 4 1
3 3
1 2 0
2 3 0
3 2 0
3 4
1 2 0
2 3 1
1 2 0
3 2 0

Sample Output

possible
impossible
impossible
possible

　　题意：给你一个图，其中既有有向边又有无向边，要你判断图中是否存在欧拉回路。
　　这题难点就在于讨论无向边的方向。首先，欧拉回路图有个性质：所有点的入度等于出度。然后又发现，对于某点连出去的一条无向边，改变它的方向，这个点的（出度-入度）奇偶性不变。所以先给无向边随意定向，然后判断是否有点的（出度-入度）为奇数，有就绝逼不可能有欧拉回路。
　　然而到这里还没有完，每个点的（出度-入度）都为偶数并不代表改变那些无向边的方向就可以形成一个欧拉回路图。
　　现在的问题类似于网络流的分配问题，设一个点的（出度-入度）为d，那么将d大于零的点和d小于零的点分成两个集合，保留原来的无向边，容量为1……具体还是看程序吧。

  1 #include <iostream>
  2 #include <cstring>
  3 #include <cstdio>
  4 #include <queue>
  5 
  6 using namespace std;
  7 const int INF=2147483647;
  8 const int maxn=210,maxm=20010;
  9 int cnt,fir[maxn],nxt[maxm],cap[maxm],to[maxm],dis[maxn],gap[maxn],path[maxn];
 10 int In[maxn],Out[maxn];
 11 void addedge(int a,int b,int c)
 12 {
 13     nxt[++cnt]=fir[a];
 14     to[cnt]=b;
 15     cap[cnt]=c;
 16     fir[a]=cnt;
 17 }
 18 
 19 bool BFS(int S,int T)
 20 {
 21     memset(dis,0,sizeof(dis));
 22     dis[T]=1;
 23     queue<int>q;q.push(T);
 24     while(!q.empty())
 25     {
 26         int node=q.front();q.pop();
 27         for(int i=fir[node];i;i=nxt[i])
 28         {
 29             if(dis[to[i]])continue;
 30             dis[to[i]]=dis[node]+1;
 31             q.push(to[i]);
 32         }
 33     }
 34     return dis[S];
 35 }
 36 int fron[maxn];
 37 int ISAP(int S,int T)
 38 {
 39     if(!BFS(S,T))
 40         return 0;
 41     for(int i=1;i<=T;i++)++gap[dis[i]];
 42     int p=S,ret=0;
 43     memcpy(fron,fir,sizeof(fir));
 44     while(dis[S]<=T+1)
 45     {
 46         if(p==T){
 47             int f=INF;
 48             while(p!=S){
 49                 f=min(f,cap[path[p]]);
 50                 p=to[path[p]^1];
 51             }
 52             p=T;ret+=f;
 53             while(p!=S){
 54                 cap[path[p]]-=f;
 55                 cap[path[p]^1]+=f;
 56                 p=to[path[p]^1];
 57             }
 58         }
 59         int &ii=fron[p];
 60         for(;ii;ii=nxt[ii]){
 61             if(!cap[ii]||dis[to[ii]]+1!=dis[p])
 62                 continue;
 63             else 
 64                 break;
 65         }
 66                 
 67         if(ii){
 68             p=to[ii];
 69             path[p]=ii;
 70         }
 71             
 72         
 73         else{
 74             if(--gap[dis[p]]==0)break;
 75             int minn=T+1;
 76             for(int i=fir[p];i;i=nxt[i])
 77                 if(cap[i])
 78                     minn=min(minn,dis[to[i]]);
 79             gap[dis[p]=minn+1]++;
 80             fron[p]=fir[p];
 81             if(p!=S)
 82                 p=to[path[p]^1];        
 83         }
 84     }
 85     return ret;
 86 }
 87 
 88 void Init()
 89 {
 90     memset(fir,0,sizeof(fir));
 91     memset(gap,0,sizeof(gap));
 92     memset(In,0,sizeof(In));
 93     memset(Out,0,sizeof(Out));
 94     cnt=1;
 95 }
 96 int main()
 97 {
 98     int T,n,m;
 99     scanf("%d",&T);
100     while(T--)
101     {
102         Init();
103         scanf("%d%d",&n,&m);
104         for(int i=1;i<=m;i++)
105         {
106             int u,v,k;
107             scanf("%d%d%d",&u,&v,&k);
108             In[v]++;Out[u]++;
109             if(!k)
110                 addedge(u,v,1),addedge(v,u,0);
111         }
112         int flag=1;
113         for(int i=1;i<=n;i++){
114             int d=Out[i]-In[i];
115             if(d&1){
116                 flag=0;
117                 break;
118             }
119             if(d>0)addedge(0,i,d/2),addedge(i,0,0);
120             if(d<0)addedge(i,n+1,d/(-2)),addedge(n+1,i,0);
121         }
122         if(flag)
123             ISAP(0,n+1);
124         for(int i=fir[0];i;i=nxt[i])
125             if(cap[i])
126                 flag=0;
127         
128         if(flag)
129             puts("possible");
130         else
131             puts("impossible");            
132     }
133     return 0;
134 }

 

最后感谢邝斌的题解，%%%


posted @ 2016-02-28 16:52  TenderRun  阅读(220)  评论(0)  编辑  收藏  举报