简单组网(LACP)负载分担链路聚合

LACP 模式链路聚合:为了提高Eth-Trunk的容错性,并且能提供备份功能,保证成员链路的高可靠性,出现了链路聚合控制协议LACP(Link Aggregation Control Protocol),LACP模式就是采用LACP 的一种链路聚合模式。
LACP为交换数据的设备提供一种标准的协商方式,以供设备根据自身配置自动形成聚合链路并启动聚合链路收发数据。
聚合链路形成以后,LACP负责维护链路状态,在聚合条件发生变化时,自动调整或解散链路聚合。

1、拓扑图

微信图片_20200903223002

2、创建vlan,并将接口加入到vlan中

SWA

[SWA]vlan batch 101 102
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWA]int g0/0/1
[SWA-GigabitEthernet0/0/1]port link-type access
[SWA-GigabitEthernet0/0/1]port default vlan 101
[SWA-GigabitEthernet0/0/1]quit
[SWA]int g0/0/2
[SWA-GigabitEthernet0/0/2]port link-type access
[SWA-GigabitEthernet0/0/2]port default vlan 102
[SWA-GigabitEthernet0/0/2]quit

SWB

[Huawei]sysname SWB
[SWB]vlan batch 101 102
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWB]int g0/0/1
[SWB-GigabitEthernet0/0/1]port link-type access
[SWB-GigabitEthernet0/0/1]port default vlan 101
[SWB-GigabitEthernet0/0/1]quit
[SWB]int g0/0/2
[SWB-GigabitEthernet0/0/2]port link-type access
[SWB-GigabitEthernet0/0/2]port default vlan 102
[SWB-GigabitEthernet0/0/2]quit

3、创建Eth-Trunk接口,设置为LACP模式,并将成员加入进来,同时将接口设置为trunk模式,允许vlan101和vlan102通过

SWA

[SWA]int Eth-Trunk 1
[SWA-Eth-Trunk1]mode lacp-static
[SWA-Eth-Trunk1]trunkport GigabitEthernet 0/0/21 to 0/0/24
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWA-Eth-Trunk1]port link-type trunk
[SWA-Eth-Trunk1]port trunk allow-pass vlan 101 102
[SWA-Eth-Trunk1]quit

SWB

[SWB]int Eth-Trunk 1
[SWB-Eth-Trunk1]mode lacp-static
[SWB-Eth-Trunk1]trunkport GigabitEthernet 0/0/21 to 0/0/24
Info: This operation may take a few seconds. Please wait for a moment...done.
[SWB-Eth-Trunk1]port link-type trunk
[SWB-Eth-Trunk1]port trunk allow-pass vlan 101 102
[SWB-Eth-Trunk1]quit

4、配置SWA为LACP的主动端,将其优先级设为100,并配置活动接口上限为2,设置接口优先级确定初始活动链路。

SWA

[SWA]lacp priority 100
[SWA]int Eth-Trunk 1
[SWA-Eth-Trunk1]max active-linknumber 2
[SWA-Eth-Trunk1]quit
[SWA]int g0/0/21
[SWA-GigabitEthernet0/0/21]lacp priority 100
[SWA-GigabitEthernet0/0/21]quit
[SWA]int g0/0/22
[SWA-GigabitEthernet0/0/22]lacp priority 100
[SWA-GigabitEthernet0/0/22]quit

5、查看配置效果

21和22接口为活动接口,实现负载链路聚合。

同时23、24接口为备份接口,当21、22出现故障的时候立刻启动备份链路,提高可靠性。

[SWA]dis eth-trunk 1
Eth-Trunk1's state information is:
Local:
LAG ID: 1                   WorkingMode: STATIC
Preempt Delay: Disabled     Hash arithmetic: According to SIP-XOR-DIP
System Priority: 100        System ID: 4c1f-cc64-1d11
Least Active-linknumber: 1  Max Active-linknumber: 2
Operate status: up          Number Of Up Port In Trunk: 2
--------------------------------------------------------------------------------
ActorPortName          Status   PortType PortPri PortNo PortKey PortState Weight
GigabitEthernet0/0/21  Selected 1GE      100     22     305     10111100  1
GigabitEthernet0/0/22  Selected 1GE      100     23     305     10111100  1
GigabitEthernet0/0/23  Unselect 1GE      32768   24     305     10100000  1
GigabitEthernet0/0/24  Unselect 1GE      32768   25     305     10100000  1

Partner:
--------------------------------------------------------------------------------
ActorPortName          SysPri   SystemID        PortPri PortNo PortKey PortState
GigabitEthernet0/0/21  32768    4c1f-cc35-195e  32768   22     305     10111100
GigabitEthernet0/0/22  32768    4c1f-cc35-195e  32768   23     305     10111100
GigabitEthernet0/0/23  32768    4c1f-cc35-195e  32768   24     305     10110000
GigabitEthernet0/0/24  32768    4c1f-cc35-195e  32768   25     305     10110000

[SWA]

将21接口shutdown查看效果

[SWA]int g0/0/21
[SWA-GigabitEthernet0/0/21]shutdown
[SWA-GigabitEthernet0/0/21]dis eth
[SWA-GigabitEthernet0/0/21]dis eth-trunk 1
Eth-Trunk1's state information is:
Local:
LAG ID: 1                   WorkingMode: STATIC
Preempt Delay: Disabled     Hash arithmetic: According to SIP-XOR-DIP
System Priority: 100        System ID: 4c1f-cc64-1d11
Least Active-linknumber: 1  Max Active-linknumber: 2
Operate status: up          Number Of Up Port In Trunk: 2
--------------------------------------------------------------------------------
ActorPortName          Status   PortType PortPri PortNo PortKey PortState Weight
GigabitEthernet0/0/21  Unselect 1GE      100     22     305     10100010  1
GigabitEthernet0/0/22  Selected 1GE      100     23     305     10111100  1
GigabitEthernet0/0/23  Selected 1GE      32768   24     305     10111100  1
GigabitEthernet0/0/24  Unselect 1GE      32768   25     305     10100000  1

Partner:
--------------------------------------------------------------------------------
ActorPortName          SysPri   SystemID        PortPri PortNo PortKey PortState
GigabitEthernet0/0/21  0        0000-0000-0000  0       0      0       10100011
GigabitEthernet0/0/22  32768    4c1f-cc35-195e  32768   23     305     10111100
GigabitEthernet0/0/23  32768    4c1f-cc35-195e  32768   24     305     10111100
GigabitEthernet0/0/24  32768    4c1f-cc35-195e  32768   25     305     10110000

[SWA-GigabitEthernet0/0/21]

切换时基本感受不到网络变化。

读书和健身总有一个在路上

posted @ 2020-09-03 22:26  Renqy  阅读(1336)  评论(0编辑  收藏  举报