CentOS 多线路由配置

#!/bin/sh
ip route flush table 10
ip route add default via 10.191.0.1 dev em1 src 10.191.0.100 table 10 prio 50
ip rule add from 10.191.0.100 table 10
ip route flush table 20
ip route add default via 10.191.10.1 dev em2 src 10.191.10.100 table 20 prio 50
ip rule add from 10.191.10.100 table 20


route add -net 10.0.0.0/8 gw 10.191.208.1

注意：以上配置只需要设置10.191.0.100的网关，其他网关不用设置

将上面的脚本放在/etc/sysconfig/static-route.sh，并在/etc/rc.loacl设置开机启动