Test

cat /proc/version

<内核版本>
uname -a
Linux linux-1bh3 3.0.76-0.11-default #1 SMP Fri Jun 14 08:21:43 UTC 2013 (ccab990) x86_64 x86_64 x86_64 GNU/Linux

lsb_release -a
LSB Version: core-2.0-noarch:core-3.2-noarch:core-4.0-noarch:core-2.0-x86_64:core-3.2-x86_64:core-4.0-x86_64:desktop-4.0-amd64:desktop-4.0-noarch:graphics-2.0-amd64:graphics-2.0-noarch:grap
hics-3.2-amd64:graphics-3.2-noarch:graphics-4.0-amd64:graphics-4.0-noarchDistributor ID: SUSE LINUX
Description: SUSE Linux Enterprise Server 11 (x86_64)
Release: 11
Codename: n/a

cat /etc/SuSE-release
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 3

<发行版本信息>
cat /etc/issue
Welcome to SUSE Linux Enterprise Server 11 SP3 (x86_64) - Kernel \r (\l).

lsb_release -d
Description: SUSE Linux Enterprise Server 11 (x86_64)

getconf LONG_BIT
cat /proc/cpuinfo |grep name

linux-1bh3:/usr/Nginx/nginx-1.10.2/conf # w
14:23:17 up 29 days, 5:38, 1 user, load average: 0.15, 0.16, 0.15
USER TTY LOGIN@ IDLE JCPU PCPU WHAT
root pts/0 13:30 17.00s 0.17s 0.00s w
linux-1bh3:/usr/Nginx/nginx-1.10.2/conf # /usr/sbin/ffbconfig –rev \?
-bash: /usr/sbin/ffbconfig: 没有那个文件或目录
linux-1bh3:/usr/Nginx/nginx-1.10.2/conf # getconf LONG_BIT
64
linux-1bh3:/usr/Nginx/nginx-1.10.2/conf # cat /proc/cpuinfo |grep name
model name : Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
model name : Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
model name : Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
model name : Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
model name : Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
model name : Intel(R) Xeon(R) CPU E5-2609 v3 @ 1.90GHz
linux-1bh3:/usr/Nginx/nginx-1.10.2/conf # cat /proc/cpuinfo | grep physical | uniq -c
1 physical id : 0
1 address sizes : 46 bits physical, 48 bits virtual
1 physical id : 0
1 address sizes : 46 bits physical, 48 bits virtual
1 physical id : 0
1 address sizes : 46 bits physical, 48 bits virtual
1 physical id : 0
1 address sizes : 46 bits physical, 48 bits virtual
1 physical id : 0
1 address sizes : 46 bits physical, 48 bits virtual
1 physical id : 0
1 address sizes : 46 bits physical, 48 bits virtual
linux-1bh3:/usr/Nginx/nginx-1.10.2/conf # dmesg | grep -i 'eth'
[ 5.890465] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.1.2-k
[ 5.984970] igb 0000:02:00.0: added PHC on eth0
[ 5.984972] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.984974] igb 0000:02:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 6c:92:bf:22:e5:b8
[ 5.985047] igb 0000:02:00.0: eth0: PBA No: 106300-000
[ 6.067189] igb 0000:02:00.1: added PHC on eth1
[ 6.067224] igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 6.067255] igb 0000:02:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 6c:92:bf:22:e5:b9
[ 6.067356] igb 0000:02:00.1: eth1: PBA No: 106300-000
[ 6.143140] igb 0000:07:00.0: added PHC on eth2
[ 6.143175] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.143206] igb 0000:07:00.0: eth2: (PCIe:5.0Gb/s:Width x4) 00:e0:ed:33:36:86
[ 6.143306] igb 0000:07:00.0: eth2: PBA No: 104900-000
[ 6.231040] igb 0000:07:00.1: added PHC on eth3
[ 6.231075] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 6.231104] igb 0000:07:00.1: eth3: (PCIe:5.0Gb/s:Width x4) 00:e0:ed:33:36:87
[ 6.231204] igb 0000:07:00.1: eth3: PBA No: 104900-000
[ 17.720556] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.288774] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 19.290063] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.297800] eth0: no IPv6 routers present
[2439333.949775] ADDRCONF(NETDEV_UP): eth0: link is not ready
[2439335.512435] igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[2439335.513792] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[2439345.847329] eth0: no IPv6 routers present
linux-1bh3:/usr/Nginx/nginx-1.10.2/conf # dmesg | grep -i 'VGA'
[ 0.000000] Command line: root=/dev/disk/by-id/scsi-366c92bf00005039c1eb391e8130c2ecb-part1 resume=/dev/disk/by-id/scsi-366c92bf00005039c1eb391e8130c2ecb-part6 splash=silent crashkernel=
256M-:128M vga=0x314[ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-366c92bf00005039c1eb391e8130c2ecb-part1 resume=/dev/disk/by-id/scsi-366c92bf00005039c1eb391e8130c2ecb-part6 splash=silent crash
kernel=256M-:128M vga=0x314[ 0.579905] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.579909] vgaarb: loaded
[ 0.927117] fb0: VESA VGA frame buffer device
linux-1bh3:/usr/Nginx/nginx-1.10.2/conf # uname -a
Linux linux-1bh3 3.0.76-0.11-default #1 SMP Fri Jun 14 08:21:43 UTC 2013 (ccab990) x86_64 x86_64 x86_64 GNU/Linux

正在接受服务 'google-chrome' 的元数据 [\]
对于'http://dl.google.com/linux/chrome/rpm/stable/x86_64/repodata/repomd.xml'的下载(curl)错误：
错误代码：Connection failed
错误信息：Couldn't resolve host 'dl.google.com'

中止、重试、忽略？ [a/r/i/?] (a): s^Ha
无效的回复 'a'。 [a/r/i/?] (a): a
正在接受服务 'google-chrome' 的元数据 [错误]
安装源 'google-chrome' 无效。
[|] 在指定 URL 未找到有效元数据
请检查这个安装源定义的 URI 指向一个有效的软件源。
警告:由于如上错误禁用安装源 'google-chrome' 。
正在加载安装源数据...
正在读取已安装的软件包...
正在解析软件包依赖性...

以下新的软件包将被安装：
gcc gcc43 glibc-devel linux-kernel-headers

4 new packages to install.
总下载大小：7.6 MiB 。 操作完成后，额外的 40.8 MiB 空间将会被使用。
是否继续？ [y/n/?] (y): y
正在接收 软件包 linux-kernel-headers-2.6.32-1.13.5.noarch (1/4), 721.0 KiB (解压后 2.6 MiB)
未能把 cd:///?devices=/dev/sr0 挂载到 /var/adm/mount/AP_0xZbc7I9: Mounting media failed (mount: no medium found on /dev/sr0)

请插入介质 [SUSE-Linux-Enterprise-Server-11-SP3 11.3.3-1.138] #1 并输入 'y' 继续或者输入 'n' 取消操作。 [是/否] (否): ^C