crontab命令详解

一. Crontab 介绍

1、crontab命令的功能是在一定的时间间隔调度一些命令的执行,我理解为windows下的任务计划。

2、/etc/crontab 文件

在/etc目录下有一个crontab文件,这里存放有系统运行的一些调度程序,每个用户可以建立自己的调度crontab。

例如我服务器下的crontab内容


3、/etc/cron.deny 和 /etc/cron.allow 文件

/etc/cron.deny 表示不能使用crontab 命令的用户
/etc/cron.allow 表示能使用crontab的用户。

如果两个文件同时存在,那么/etc/cron.allow 优先。
如果两个文件都不存在,那么只有超级用户可以安排作业。

每个用户都会生成一个自己的crontab 文件。这些文件在/var/spool/cron目录下:
如:

[root@dave ~]# cd /var/spool/cron
[root@dave cron]# ls
oracle  root

我们直接查看这个文件,里面的内容和对应用户显示的crontab -l 一致。

[root@dave cron]# cat oracle
00 6 * * * /u02/scripts/del_st_archive.sh >/u02/scripts/del_st_arch.log 2>&1
[root@dave cron]# cat root
0 12 * * * /root/bin/sync-clock.sh
[root@dave cron]#

二. Crontab 使用说明

2.1 Crontab语法
usage: crontab [-u user] file
crontab [-u user] [ -e | -l | -r ]
(default operation is replace, per 1003.2)
-e (edit user's crontab)
-l (list user's crontab)
-r (delete user's crontab)
-i (prompt before deleting user's crontab)
-s (selinux context)

其中,file是命令文件的名字。如果在命令行中指定了这个文件,那么执行crontab命令,则将这个文件拷贝到crontabs目录下;如果在命令行中没有制定这个文件,crontab命令将接受标准输入(键盘)上键入的命令,并将他们也存放在crontab目录下。

帮助:

[root@dave ~]# man crontab
CRONTAB(1)                                                          CRONTAB(1)
  
NAME
       crontab - maintain crontab files for individual users (ISC Cron V4.1)
  
SYNOPSIS
       crontab [-u user] file
       crontab [-u user] [-l | -r | -e] [-i] [-s]
  
DESCRIPTION
       Crontab  is the program used to install, deinstall or list the tables used to drive the cron(8) daemon in ISC Cron.  Each user can have their own crontab,  and  though these  are  files in /var/spool/ , they are not intended to be edited directly. For SELinux in mls mode can be even more crontabs  -  for  each  range.  For  more  see selinux(8).
       If  the  cron.allow  file  exists,  then  you must be listed therein in order to be allowed to use this command.  If  the  cron.allow  file  does  not  exist  but  the cron.deny  file  does  exist,  then you must not be listed in the cron.deny file in order to use this command.  If neither of these files exists, only the  super  user will be allowed to use this command.
  
OPTIONS
       -u     It  specifies  the name of the user whose crontab is to be tweaked.  If this  option is not given, crontab examines "your" crontab, i.e., the  crontab  of the  person  executing the command.  Note that su(8) can confuse crontab and               that if you are running inside of su(8) you should always use the -u  option               for  safety¡¯s sake.  The first form of this command is used to install a new               crontab from some named file or standard input if the pseudo-filename "-" is               given.
       -l     The current crontab will be displayed on standard output.
       -r     The current crontab will be be removed.
       -e     This  option  is used to edit the current crontab using the editor specified by the VISUAL or EDITOR environment variables.  After you exit from the edi-tor, the modified crontab will be installed automatically.
       -i     This  option  modifies the -r option to prompt the user for a ¡¯y/Y¡¯ response before actually removing the crontab.
       -s     It will append the current SELinux security context string as  an  MLS_LEVEL setting  to  the  crontab file before editing / replacement occurs - see the documentation of MLS_LEVEL in crontab(5).
  
SEE ALSO
       crontab(5), cron(8)
FILES
       /etc/cron.allow
       /etc/cron.deny
STANDARDS
       The crontab command conforms to IEEE Std1003.2-1992 (¡®¡®POSIX¡¯¡¯).  This new  command syntax  differs  from  previous versions of Vixie Cron, as well as from the classic
       SVR3 syntax.
DIAGNOSTICS
       A fairly informative usage message appears if you run it with a bad command line.
AUTHOR
       Paul Vixie 
4th Berkeley Distribution       16 Januar 2007                      CRONTAB(1)
  
  
  

2.2 Crontab 格式说明
我们可以用crontab -e 添加要执行的命令。 命令执行的结果,无论是标准输出还是错误输出,都将以邮件形式发给用户。

添加的命令必须以如下格式:

   
* * * * * /command path
       

前五个字段可以取整数值,指定何时开始工作,第六个域是字符串,即命令字段,其中包括了crontab调度执行的命令。 各个字段之间用spaces和tabs分割。

前5个字段分别表示:
分钟:0-59
小时:1-23
日期:1-31
月份:1-12
星期:0-6(0表示周日)

还可以用一些特殊符号:
*: 表示任何时刻
,: 表示分割
   -:表示一个段,如第二端里: 1-5,就表示1到5点
/n : 表示每个n的单位执行一次,如第二段里,*/1, 就表示每隔1个小时执行一次命令。也可以写成1-23/1.

一些示例:

00 8,12,16 * * * /data/app/scripts/monitor/df.sh
30 2 * * * /data/app/scripts/hotbackup/hot_database_backup.sh
10 8,12,16 * * * /data/app/scripts/monitor/check_ind_unusable.sh
10 8,12,16 * * * /data/app/scripts/monitor/check_maxfilesize.sh
10 8,12,16 * * * /data/app/scripts/monitor/check_objectsize.sh
 
43 21 * * *               21:43 执行
15 05 * * *             05:15 执行
0 17 * * *                17:00 执行
0 17 * * 1                每周一的 17:00 执行
0,10 17 * * 0,2,3         每周日,周二,周三的 17:00和 17:10 执行
0-10 17 1 * *             毎月1日从 17:00到7:10 毎隔1分钟 执行
0 0 1,15 * 1              毎月1日和 15日和 一日的 0:00 执行
42 4 1 * *              毎月1日的 4:42分 执行
0 21 * * 1-6            周一到周六 21:00 执行
0,10,20,30,40,50 * * * * 每隔10分 执行
*/10 * * * *        每隔10分 执行
* 1 * * *         从1:0到1:59 每隔1分钟 执行
0 1 * * *         1:00 执行
0 */1 * * *        毎时0分 每隔1小时 执行
0 * * * *         毎时0分 每隔1小时 执行
2 8-20/3 * * *      8:02,11:02,14:02,17:02,20:02 执行
30 5 1,15 * *       1日 和 15日的 5:30 执行
  

2.3 后台执行命令

当在前台运行某个作业时,终端被该作业占据;而在后台运行作业时,它不会占据终端。可以使用&命令把作业放到后台执行。

如:

       30 2 * * * /data/app/scripts/hotbackup/hot_database_backup.sh &
 

在后台运行作业时要当心:需要用户交互的命令不要放在后台执行,因为这样你的机器就会在那里傻等。
不过,作业在后台运行一样会将结果输出到屏幕上,干扰你的工作。如果放在后台运行的作业会产生大量的输出,最好使用下面的方法把它的输出重定向到某个文件中:
如:

              command >out.file 2>&1 &
  

在这个例子中,2>&1表示所有的标准输出和错误输出都将被重定向到一个叫做out.file 的文件中。

2.4 2>&1 含义

先看一个例子:

0 2 * * * /u01/test.sh >/dev/null 2>&1 &

这句话的意思就是在后台执行这条命令,并将错误输出2重定向到标准输出1,然后将标准输出1全部放到/dev/null 文件,也就是清空。

在这里有有几个数字的意思:
0表示键盘输入
1表示标准输出
2表示错误输出.

我们也可以这样写:

0 2 * * * /u01/test.sh  >/u01/out.file &  --这里没写,默认是1
0 2 * * * /u01/test.sh  1>/u01/out.file &
0 2 * * * /u01/test.sh  2>/u01/out.file &
0 2 * * * /u01/test.sh  2>/u01/out.file  2>&1 &
  

将tesh.sh 命令输出重定向到out.file, 即输出内容不打印到屏幕上,而是输出到out.file文件中。

2>&1 是将错误输出重定向到标准输出。 然后将标准输入重定向到文件out.file。
&1 表示的是文件描述1,表示标准输出,如果这里少了&就成了数字1,就表示重定向到文件1。

& :后台执行

测试:

ls 2>1 : 不会报没有2文件的错误,但会输出一个空的文件1;
ls xxx 2>1: 没有xxx这个文件的错误输出到了1中;
ls xxx 2>&1: 不会生成1这个文件了,不过错误跑到标准输出了;
ls xxx >out.txt 2>&1 == ls xxx 1>out.txt 2>&1;  因为重定向符号>默认是1,这句就把错误输出和标准输出都传到out.txt 文件中。
  

2.5 2>&1写在后面的原因

       格式:command > file 2>&1   == command  1> file 2>&1
  

首先是command > file将标准输出重定向到file中, 2>&1 是标准错误拷贝了标准输出,也就是同样被重定向到file中,最终结果就是标准输出和错误都被重定向到file中。

如果改成:

command 2>&1 >file

2>&1 标准错误拷贝了标准输出的行为,但此时标准输出还是在终端。>file 后输出才被重定向到file,但标准错误仍然保持在终端。

posted @ 2017-06-01 20:58  Big_Foot  阅读(4730)  评论(0编辑  收藏  举报