Azure容器监控部署（上）

前两篇简单的介绍了一下prometheus的，本节原本是写node_exporter和cAdvisor的搭建，但网上教程很多，所以直接写整套环境的部署过程

 一、架构

    我们原来的系统架构是在AZURE上有两台虚机作为业务机，部署一个Load Balance，用户访问LB，LB根据特定规则将流量转发至内部的虚机VM1/VM2。并且VM1/VM2组成一个局域网，外界是无法直接访问的，只能通过LB跳转到VM1/VM2上

    prometheus最优的部署方案是将prometheus节点部署到VM1/VM2的局域网内，对外暴露一个端口，或者在LB上设置NAT规则直接连接prometheus，这样做的优点是：

        1、VM1/VM2/prometheus组成的局域网，外界无法访问；

        2、默认情况下node_exporter和cAdvisor是http协议，避免了VM1/VM2上收集到的数据通过外网传输

    但由于种种原因，我们的prometheus只能部署到外部，因此整个系统的架构如下图 ：VM1/VM2上部署的node_exporter和cAdvisor对外暴露9091和8008端口（可自定义），由LB的NAT端口转发映射到LB上。然后再由prometheus分别去收集以下四个端口的监控数据。

　

二、各组件版本

       Prometheus         2.9

       Grafana                6.1.6

       cAdvisor               0.17

       node_exporter      0.17

       stunnel                 5.44

       nginx                    1.14

       certbot                  0.23

三、Load Balance上与prometheus相关的端口（设置的NAT入站规则）

       19101端口连接VM1的9101

       18008端口连接VM1的8008

       29101端口连接VM2的9101

       28008端口连接VM2的8008

 

四、部署过程

1、在AZURE上创建prometheus的虚机设置固定IP和域名

2、在prometheus server上安装docker

安装脚本如下：

sudo apt-get update
sudo apt-get install -y apt-transport-https ca-certificates curl software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg|sudo apt-key add -
sudo add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
sudo apt-get update
sudo apt-get install -y docker-ce
sudo systemctl restart docker
sudo docker images
sudo groupadd docker
sudo usermod -aG docker $USER

3、在prometheus server上安装prometheus

下载路径：

cd /usr/local/share/prometheus/
wget https://github.com/prometheus/prometheus/releases/download/v2.9.1/prometheus-2.9.1.linux-amd64.tar.gz

解压安装，并将prometheus加由systemd管理

sudo adduser prometheus
sudo chown -R prometheus:prometheus /usr/local/share/prometheus/


vim /etc/systemd/system/prometheus.service

[Unit]
Description=Prometheus Server
Documentation=https://prometheus.io/docs/introduction/overview/
After=network.target
 
[Service]
Restart=on-failure
WorkingDirectory=/usr/local/share/prometheus/
ExecStart=/usr/local/share/prometheus/prometheus \
    --config.file=/usr/local/share/prometheus/prometheus.yml \
    --web.external-url=https://虚机域名 \
    --storage.tsdb.retention.time=30d
 
[Install]
WantedBy=multi-user.target

启动prometheus

sudo systemctl daemon-reload
sudo systemctl start Prometheus
sudo systemctl enable Prometheus    #设置为开机自启
sudo systemctl status prometheus

4、在prometheus server上安装nginx和certbot

sudo apt -y install nginx

certbot是一款免费生成tls的安全证书，安装脚本

sudo apt-get update
sudo apt-get install software-properties-common
sudo add-apt-repository universe
sudo add-apt-repository ppa:certbot/certbot
sudo apt-get update
sudo apt-get install certbot python-certbot-nginx 
sudo certbot –nginx

根据提示输入邮箱、主机名等信息【主机名不能乱写】

生成证书的位置在 /etc/letsencrypt/live/主机名/

ertbot提供的证书有效期是90天，可以利用官方提供的命令定期重新生成证书，最后将其加入周期性计划任务中。

certbot renew --dry-run

配置nginx的配置文件

sudo vim /etc/nginx/nginx.conf

#修改server配置
server {
    listen 443 ssl;
    server_name  lkprometheusemu.southeastasia.cloudapp.azure.com;
    ssl_certificate /etc/letsencrypt/live/fullchain.pem; # managed by Certbot
    ssl_certificate_key /etc/letsencrypt/live/privkey.pem; # managed by Certbot

location / {
   root /var/www/html;
     index index.html;
     proxy_pass http://127.0.0.1:3000;
                }
        }

　　启动nginx 

       sudo nginx

5、在vm1/VM2上安装node_exporter

sudo wget https://github.com/prometheus/node_exporter/releases/download/v0.17.0/node_exporter-0.17.0.linux-amd64.tar.gz
sudo tar -xf node_exporter-0.17.0.linux-amd64.tar.gz

加入开机自启
vim /etc/systemd/system/nodeexporter.service 
[Unit]
Description=Node Exporter
After=network.target

[Service]
ExecStart=/usr/local/share/node_exporter/node_exporter  --web.listen-address=127.0.0.1:9101

[Install]
WantedBy=multi-user.target

启动并开机自启
sudo vim /etc/systemd/system/node_exporter.service
sudo systemctl daemon-reload 
sudo systemctl start node_exporter.service
sudo systemctl status node_exporter.service

对外暴露9101端口

6、在VM1/VM2上安装cAdvisor

切换到root用户执行

docker run -d  \
--volume=/:/rootfs:ro \
--volume=/var/run:/var/run:rw \
--volume=/sys:/sys:ro \
--volume=/var/lib/docker/:/var/lib/docker:ro \
-p 8088:8080 \
--restart=always \
--name=cadvisor \
google/cadvisor

　　对外暴露8088端口

7、在VM1/VM2上安装stunnel

sudo apt install stunnel

启用stunnel

编辑 sudo vim /etc/default/stunnel4，将ENABLE改成1

8、在任意一个linux主机上创建自有证书

将生成的证书拷贝的VM1/VM2指定位置，我放在了/etc/stunnel/tls下

sudo mkdir /etc/stunnel/tls 
cd /etc/stunnel/tls
sudo openssl genrsa -out key.pem 2048             #创建一个2048位的秘钥
sudo openssl req -new -x509 -key key.pem -out cert.pem -days 3650 -subj "/C=US/ST=Denial/L=Springfield/O=Dis/CN=所在主机的主机名" 
sudo chmod 640 key.pem  cert.pem private.pem

9、修改stunnel的配置

　以下配置为vm1，在vm2上需将node_exporter1、cAdvisor1改成node_exporter2、cADVisor2

sudo vim /etc/stunnel/stunnel.conf

pid             = /var/run/stunnel4/stunnel.pid
output          = /var/log/stunnel4/stunnel.log

[node_exporter1]
accept          = 9101
connect         = 127.0.0.1:9100
cert            = /etc/stunnel/tls/cert.pem
key             = /etc/stunnel/tls/key.pem

[cAdvisor1]
accept          = 8008
connect         = 127.0.0.1:8088
cert            = /etc/stunnel/tls/cert.pem
key             = /etc/stunnel/tls/key.pem

重启stunnel服务

sudo systemctl restart stunnel4

10、在prometheus server上配置prometheus

sudo vim /usr/local/share/prometheus/prometheus.yml

	# my global config
global:
  scrape_interval:     15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
  # scrape_timeout is set to the global default (10s).

# Alertmanager configuration
alerting:
  alertmanagers:
  - static_configs:
    - targets:
      # - alertmanager:9093

# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
rule_files:
  # - "first_rules.yml"
  # - "second_rules.yml"

# A scrape configuration containing exactly one endpoint to scrape:
# Here it's Prometheus itself.
scrape_configs:
  # The job name is added as a label `job=<job_name>` to any timeseries scraped from this config.
  - job_name: 'prometheus'
    static_configs:
    - targets: ['127.0.0.1:9090']

  - job_name: 'node_exporter1'
    static_configs:
    - targets: ['LBIP:19101']
    scheme: https
tls_config:
      insecure_skip_verify: true

  - job_name: 'node_exporter2'
    static_configs:
    - targets: ['LBIP:29101']
    scheme: https
    tls_config:
      insecure_skip_verify: true

  - job_name: 'cadvisor1'
    static_configs:
    - targets: ['LBIP:18008']
    scheme: https
    tls_config:
      insecure_skip_verify: true

  - job_name: 'cadvisor2'
    static_configs:
    - targets: ['LBIP:28008']
    scheme: https
    tls_config:
      insecure_skip_verify: true

检查prometheus的配置是否成功，切换到prometheus的安装目录下执行

promtool check rules prometheus.yml

11、在prometheus server上安装grafana

wget https://dl.grafana.com/oss/release/grafana_6.1.6_amd64.deb 
sudo dpkg -i grafana_6.1.6_amd64.deb 
sudo /bin/systemctl daemon-reload
sudo systemctl start grafana-server.service 
sudo systemctl enable grafana-server.service

配置grafana的邮件功能

sudo vim /etc/grafana/grafana.ini

重启grafana

sudo systemctl start grafana-server.service

登陆grafana后添加prometheus的数据源

默认的用户名是 admin

默认密码是 admin

此时，检查prometheus是否连接正常。

其余步骤见下文

 

posted @ 2019-06-05 18:55  一个有故事的devops  阅读(3458)  评论(0)  编辑  收藏  举报