粒子滤波和扩展卡尔曼滤波对比

function ParticleEx1

% Particle filter example, adapted from Gordon, Salmond, and Smith paper.

x = 0.1; % initial state
Q = 1; % process noise covariance
R = 1; % measurement noise covariance
tf = 50; % simulation length

N = 100; % number of particles in the particle filter

xhat = x;
P = 2;
xhatPart = x;

% Initialize the particle filter.
for i = 1 : N
    xpart(i) = x + sqrt(P) * randn;
end

xArr = [x];
yArr = [x^2 / 20 + sqrt(R) * randn];
xhatArr = [x];
PArr = [P];
xhatPartArr = [xhatPart];

close all;

for k = 1 : tf
    % System simulation
    x = 0.5 * x + 25 * x / (1 + x^2) + 8 * cos(1.2*(k-1)) + sqrt(Q) * randn;%状态方程
    y = x^2 / 20 + sqrt(R) * randn;%观测方程
    % Extended Kalman filter
    F = 0.5 + 25 * (1 - xhat^2) / (1 + xhat^2)^2;
    P = F * P * F' + Q;
    H = xhat / 10;
    K = P * H' * (H * P * H' + R)^(-1);
    xhat = 0.5 * xhat + 25 * xhat / (1 + xhat^2) + 8 * cos(1.2*(k-1));%预测
    xhat = xhat + K * (y - xhat^2 / 20);%更新
    P = (1 - K * H) * P;
    % Particle filter
    for i = 1 : N
        xpartminus(i) = 0.5 * xpart(i) + 25 * xpart(i) / (1 + xpart(i)^2) + 8 * cos(1.2*(k-1)) + sqrt(Q) * randn;
        ypart = xpartminus(i)^2 / 20;
        vhat = y - ypart;%观测和预测的差
        q_temp(i,k) = (1 / sqrt(R) / sqrt(2*pi)) * exp(-vhat^2 / 2 / R);
    end
    % Normalize the likelihood of each a priori estimate.
    qsum = sum(q_temp(:,k));
    for i = 1 : N
        q(i) = q_temp(i,k) / qsum;%归一化权重
    end
    % Resample.
    for i = 1 : N
        u = rand; % uniform random number between 0 and 1
        qtempsum = 0;
        for j = 1 : N
            qtempsum = qtempsum + q(j);
            if qtempsum >= u
                xpart(i) = xpartminus(j);
                break;
            end
        end
    end
    % The particle filter estimate is the mean of the particles.
    xhatPart = mean(xpart);
    % Save data in arrays for later plotting
    xArr = [xArr x];
    yArr = [yArr y];
    xhatArr = [xhatArr xhat];
    PArr = [PArr P];
    xhatPartArr = [xhatPartArr xhatPart];
end

t = 0 : tf;

%figure;
%plot(t, xArr);
%ylabel('true state');

figure;
plot(t, xArr, 'b.', t, xhatArr, 'k-', t, xhatArr-2*sqrt(PArr), 'r:', t, xhatArr+2*sqrt(PArr), 'r:');
axis([0 tf -40 40]);
set(gca,'FontSize',12); set(gcf,'Color','White'); 
xlabel('time step'); ylabel('state');
legend('True state', 'EKF estimate', '95% confidence region'); 

figure;
plot(t, xArr, 'b.', t, xhatPartArr, 'k-');
set(gca,'FontSize',12); set(gcf,'Color','White'); 
xlabel('time step'); ylabel('state');
legend('True state', 'Particle filter estimate'); 

xhatRMS = sqrt((norm(xArr - xhatArr))^2 / tf);
xhatPartRMS = sqrt((norm(xArr - xhatPartArr))^2 / tf);
disp(['Kalman filter RMS error = ', num2str(xhatRMS)]);
disp(['Particle filter RMS error = ', num2str(xhatPartRMS)]);