3Com3870 Switch
1. Login
Login: admin
Password:
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
bridge - Administer bridge-wide parameters
feature - Administer system features
gettingStarted - Basic device configuration
logout - Logout of the Command Line Interface
physicalInterface - Administer physical interfaces
protocol - Administer protocols
security - Administer security
system - Administer system-level functions
trafficManagement - Administer traffic management
Type ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option:
bridge
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option: bridge
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
addressDatabase - Administer bridge addresses
broadcastStormCont - Enable/disable broadcast storm control
jumboFrames - Enable/disable jumbo frame support
linkAggregation - Administer aggregated links
multicastFilter - Administer multicast filtering
port - Administer bridge ports
spanningTree - Administer spanning tree
summary - Display summary information
vlan - Administer VLANs
Type "quit" to return to previous menu or ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (bridge):
port
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (bridge): port
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
defaultPriority - Sets the default 802.1D priority for untagged frames
detail - Display detailed information
label - Set a port label
lacpState - Enable/disable Link Aggregation Control Protocol
stpCost - Set the Spanning Tree path cost parameter
stpFastStart - Enable/disable Spanning Tree fast start
stpState - Enable/disable Spanning Tree per port
summary - Display summary information
Type "quit" to return to previous menu or ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (bridge/port):
2. Return or exit
quit
or Esc
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (bridge/port): quit
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
addressDatabase - Administer bridge addresses
broadcastStormCont - Enable/disable broadcast storm control
jumboFrames - Enable/disable jumbo frame support
linkAggregation - Administer aggregated links
multicastFilter - Administer multicast filtering
port - Administer bridge ports
spanningTree - Administer spanning tree
summary - Display summary information
vlan - Administer VLANs
Type "quit" to return to previous menu or ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (bridge):
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option: quit
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
bridge - Administer bridge-wide parameters
feature - Administer system features
gettingStarted - Basic device configuration
logout - Logout of the Command Line Interface
physicalInterface - Administer physical interfaces
protocol - Administer protocols
security - Administer security
system - Administer system-level functions
trafficManagement - Administer traffic management
Type ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option:
3. View Interface
physicalInterface
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option: physicalInterface
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
ethernet - Administer Ethernet ports
Type "quit" to return to previous menu or ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface):
ethernet
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface): ethernet
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
detail - Display detailed information
flowControl - Enable/disable flow control
portCapabilities - Set the port capabilities
portMode - Set the port speed, duplex and auto-negotiation
portState - Enable/disable an Ethernet port
summary - Display summary information
Type "quit" to return to previous menu or ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface/ethernet):
detail
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface/ethernet): detail
Select bridge ports (unit:port,?):
1:48
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface/ethernet): detail
Select bridge ports (unit:port,?): 1:48
Port: 1:48 State: enabled Mode: 1000full (Auto)
Media Type: 1000Base-LX SFP type (3Com. 3CSFP92)
Active Features : STAP Enabled, BSC Enabled
-Counters- -Rx- -Tx-
Unicast Packets: 19601586 2195353
Non Unicast Packets: 58682598 921709
Octets: 24137728707 352237152
Fragments(Rx)/Collisions(Tx): 0 0
Discarded Packets(Rx): 61171164 -
-Rx Errors-
Undersize: 0 Oversize: 0
CRC Error: 0 Jabbers: 6
-Pkt Analysis-
64 Octets: 6159692 256 to 511 Octets: 8365648
65 to 127 Octets: 59407036 512 to 1023 Octets: 1202958
128 to 255 Octets: 11974673 1024 to 1518 Octets: 2809588
Select menu option (physicalInterface/ethernet):
ethernet
Select menu option (physicalInterface/ethernet): ethernet
"ethernet" is not a valid selection.
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
detail - Display detailed information
flowControl - Enable/disable flow control
portCapabilities - Set the port capabilities
portMode - Set the port speed, duplex and auto-negotiation
portState - Enable/disable an Ethernet port
summary - Display summary information
Type "quit" to return to previous menu or ? for help.
detail 1:48
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface/ethernet): detail 1:48
Port: 1:48 State: enabled Mode: 1000full (Auto)
Media Type: 1000Base-LX SFP type (3Com. 3CSFP92)
Active Features : STAP Enabled, BSC Enabled
-Counters- -Rx- -Tx-
Unicast Packets: 19604159 2197779
Non Unicast Packets: 58747825 921827
Octets: 24149095895 352584690
Fragments(Rx)/Collisions(Tx): 0 0
Discarded Packets(Rx): 61217444 -
-Rx Errors-
Undersize: 0 Oversize: 0
CRC Error: 0 Jabbers: 6
-Pkt Analysis-
64 Octets: 6164889 256 to 511 Octets: 8372829
65 to 127 Octets: 59461856 512 to 1023 Octets: 1204004
128 to 255 Octets: 11984559 1024 to 1518 Octets: 2810391
Select menu option (physicalInterface/ethernet):
4. Interface enable or disable
ethernet
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface): ethernet
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
detail - Display detailed information
flowControl - Enable/disable flow control
portCapabilities - Set the port capabilities
portMode - Set the port speed, duplex and auto-negotiation
portState - Enable/disable an Ethernet port
summary - Display summary information
Type "quit" to return to previous menu or ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface/ethernet):
portState
and 1:48
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface/ethernet): portState
Select Ethernet ports(unit:port...,?): 1:48
Enter new value (enable,disable) [enable]: enable
portState 1:48
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
detail - Display detailed information
flowControl - Enable/disable flow control
portCapabilities - Set the port capabilities
portMode - Set the port speed, duplex and auto-negotiation
portState - Enable/disable an Ethernet port
summary - Display summary information
Type "quit" to return to previous menu or ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option (physicalInterface/ethernet): portState 1:48
Enter new value (enable,disable) [enable]: enable
5. logout
Menu options: -------3Com SuperStack 3 Switch 3870 48-port---------------------
bridge - Administer bridge-wide parameters
feature - Administer system features
gettingStarted - Basic device configuration
logout - Logout of the Command Line Interface
physicalInterface - Administer physical interfaces
protocol - Administer protocols
security - Administer security
system - Administer system-level functions
trafficManagement - Administer traffic management
Type ? for help.
--------------------------------MIS-1K-MENJ (1)--------------------------------
Select menu option: logout