迈普交换机-开局和部分优化参数

基本配置：

#//配置设备名 特权密码 ip地址
switch>enable
switch#configure terminal
switch(config)#hostname SWITCH1A
SWITCH1A(config)#enable password ********
switch(config)#interface vlan 1
switch(config-if-vlan1)#ip address a.b.c.d 255.255.255.0
switch(config-if-vlan1)#exit
#//开启ssh 配置本地认证用户
switch(config)#ip ssh server
switch(config)#local-user admin class manager
switch(config-user-manager-admin)#privilege 15
switch(config-user-manager-admin)#user-role network-admin
switch(config-user-manager-admin)#password 0 ******
switch(config-user-manager-admin)#service-type ssh
switch(config-user-manager-admin)#exit
switch(config)#line vty 0 4
switch(config-line)#privilege level 15
switch(config-line)#login aaa
#
switch(config)#snmp-server start
switch(config)#snmp-server community public view default rw
switch(config)#interface gigabitethernet 0/1-0/48 (根据交换机实际端口数量全部进行配置)
switch(config-if-range)#no storm-control unicast
switch(config-if-range)#no storm-control broadcast
switch(config-if-range)#no storm-control multicast
SWITCH2A(config-if-range)#exit
SWITCH2A(config)#exit
switch#write

 

 

 

纯复制粘贴版（*号做改变）
enable
configure terminal
hostname SWITCH**
enable password **********
interface vlan 1
ip address a.b.c.d 255.255.255.0
exit
ip ssh server
local-user admin class manager
privilege 15
user-role network-admin
password 0 ************
service-type ssh
exit
line vty 0 4
privilege level 15
login aaa
exit
snmp-server start
snmp-server community public view default rw
interface gigabitethernet 0/1-0/48
no storm-control unicast
no storm-control broadcast
no storm-control multicast
Exit
Exit
write
yes