SW1
Switch>en Switch#conf t Enter configuration commands, one per line. End with CNTL/Z. Switch(config)#hostname R1 R1(config)#line console 0 R1(config-line)#logging synchronous R1(config-line)#exec-timeout 00 R1(config-line)#end R1#conf t Enter configuration commands, one per line. End with CNTL/Z. R1(config)#vlan 2 R1(config-vlan)#name caiwu R1(config-vlan)#vlan 3 R1(config-vlan)#name it R1(config-vlan)#end R1(config)#interface range fastEthernet 0/1-2 R1(config-if-range)#switchport mode access R1(config-if-range)#switchport access vlan 2 R1(config-if-range)#exit R1(config)#interface range fastEthernet 0/3-5 R1(config-if-range)#switchport mode access R1(config-if-range)#switchport access vlan 3 R1(config-if-range)#exit R1(config)#end R1# %SYS-5-CONFIG_I: Configured from console by console R1#show vlan brief VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa0/6, Fa0/7, Fa0/8, Fa0/9 Fa0/10, Fa0/11, Fa0/12, Fa0/13 Fa0/14, Fa0/15, Fa0/16, Fa0/17 Fa0/18, Fa0/19, Fa0/20, Fa0/21 Fa0/22, Fa0/23, Fa0/24, Gig0/1 Gig0/2 2 caiwu active Fa0/1, Fa0/2 3 it active Fa0/3, Fa0/4, Fa0/5 1002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active R1#
