未来_我来
因为渴望改变,所以必须努力

1、Response

2、Request

3、路径

4、编码

请求响应流程图

 

response

1、response概述

response是Servlet.service方法的一个参数,类型为javax.servlet.http.HttpServletResponse。在客户端发出每个请求时,服务器都会创建一个response对象,并传入给Servlet.service()方法。response对象是用来对客户端进行响应的,这说明在service()方法中使用response对象可以完成对客户端的响应工作。

response对象的功能分为以下四种:

设置响应头信息

发送状态码

设置响应正文

重定向

 

2response响应正文

response是响应对象,向客户端输出响应正文(响应体)可以使用response的响应流,repsonse一共提供了两个响应流对象:

PrintWriter out = response.getWriter()获取字符流

ServletOutputStream out = response.getOutputStream()获取字节流

 

当然,如果响应正文内容为字符,那么使用response.getWriter(),如果响应内容是字节,例如下载时,那么可以使用response.getOutputStream()。

注意,在一个请求中,不能同时使用这两个流!也就是说,要么你使用repsonse.getWriter(),要么使用response.getOutputStream(),但不能同时使用这两个流。不然会抛出IllegalStateException异常。

 

2.1字符响应流

字符编码

在使用response.getWriter()时需要注意默认字符编码为ISO-8859-1,如果希望设置字符流的字符编码为utf-8,可以使用response.setCharaceterEncoding(utf-8)来设置。这样可以保证输出给客户端的字符都是使用UTF-8编码的!

但客户端浏览器并不知道响应数据是什么编码的!如果希望通知客户端使用UTF-8来解读响应数据,那么还是使用response.setContentType("text/html;charset=utf-8")方法比较好,因为这个方法不只会调用response.setCharaceterEncoding(utf-8),还会设置content-type响应头,客户端浏览器会使用content-type头来解读响应数据。

 

缓冲区

response.getWriter()是PrintWriter类型,所以它有缓冲区,缓冲区的默认大小为8KB。也就是说,在响应数据没有输出8KB之前,数据都是存放在缓冲区中,而不会立刻发送到客户端。当Servlet执行结束后,服务器才会去刷新流,使缓冲区中的数据发送到客户端

如果希望响应数据马上发送给客户端:

Ø 向流中写入大于8KB的数据

Ø 调用response.flushBuffer()方法来手动刷新缓冲区

 

3设置响应头信息

  可以使用response对象的setHeader()方法来设置响应头!使用该方法设置的响应头最终会发送给客户端浏览器!

response.setHeader(content-type, text/html;charset=utf-8):设置content-type响应头,该头的作用是告诉浏览器响应内容为html类型,编码为utf-8。而且同时会设置response的字符流编码为utf-8,即response.setCharaceterEncoding(“utf-8”)

response.setHeader("Refresh","5; URL=http://www.itcast.cn"):5秒后自动跳转到传智主页。

 

4设置状态码及其他方法

response.setContentType("text/html;charset=utf-8"):等同于调用response.setHeader(“content-type”, “text/html;charset=utf-8”)

response.setCharacterEncoding(“utf-8”):设置字符响应流的字符编码为utf-8;

response.setStatus(200):设置状态码;

response.sendError(404, “您要查找的资源不存在”):当发送错误状态码时,Tomcat会跳转到固定的错误页面去,但可以显示错误信息。

 

5重定向

5.1什么是重定向

当你访问http://www.sun.com时,你会发现浏览器地址栏中的URL会变成http://www.oracle.com/us/sun/index.htm,这就是重定向了。

重定向是服务器通知浏览器去访问另一个地址,即再发出另一个请求

 

5.2 完成重定向

响应码为200表示响应成功,而响应码为302表示重定向。所以完成重定向的第一步就是设置响应码为302

因为重定向是通知浏览器发出第二个请求,所以浏览器需要知道第二个请求的URL,所以完成重定向的第二步是设置Location头,指定第二个请求的URL地址

 

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    response.setStatus(302);//设置响应码为302,表示重定向

    response.setHeader("Location", "http://www.itcast.cn");//设置新请求的URL

 

  }

}

 

  上面代码的作用是:当访问AServlet后,会通知浏览器重定向到传智主页。客户端浏览器解析到响应码为302后,就知道服务器让它重定向,所以它会马上获取响应头Location,然发出第二个请求。

 

5.3 便捷的重定向方式

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {

    response.sendRedirect("http://www.itcast.cn");

  }

}

 

response.sendRedirect()方法会设置响应头为302,以设置Location响应头

如果要重定向的URL是在同一个服务器内,那么可以使用相对路径,例如:

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {

    response.sendRedirect("/hello/BServlet");

  }

}

 

重定向的URL地址为:http://localhost:8080/hello/BServlet。

 

5.4 重定向小结

重定向是两次请求

重定向的URL可以是其他应用,不局限于当前应用;

重定向的响应头为302,并且必须要有Location响应头

重定向就不要再使用response.getWriter()或response.getOutputStream()输出数据,不然可能会出现异常;

 

request

1request概述

request是Servlet.service()方法的一个参数,类型为javax.servlet.http.HttpServletRequest。在客户端发出每个请求时,服务器都会创建一个request对象,并把请求数据封装到request中,然后在调用Servlet.service()方法时传递给service()方法,这说明在service()方法中可以通过request对象来获取请求数据。

 

request的功能可以分为以下几种:

封装了请求头数据

封装了请求正文数据,如果是GET请求,那么就没有正文;

request是一个域对象,可以把它当成Map来添加获取数据

request提供了请求转发请求包含功能。

 

2request域方法

request是域对象!在JavaWeb中一共四个域对象,其中ServletContext就是域对象,它在整个应用中只创建一个ServletContext对象。request其中一个,request可以在一个请求中共享数据

一个请求会创建一个request对象,如果在一个请求中经历了多个Servlet,那么多个Servlet就可以使用request来共享数据。现在我们还不知道如何在一个请求中经历个Servlet,后面在学习请求转发和请求包含后就知道了。

下面是request的域方法:

void setAttribute(String name, Object value):用来存储一个对象,也可以称之为存储一个域属性,例如:servletContext.setAttribute(xxx, XXX),在request中保存了一个域属性,域属性名称为xxx,域属性的值为XXX。请注意,如果多次调用该方法,并且使用相同的name,那么会覆盖上一次的值,这一特性与Map相同;

Object getAttribute(String name):用来获取request中的数据,当前在获取之前需要先去存储才行,例如:String value = (String)request.getAttribute(xxx);,获取名为xxx的域属性;

void removeAttribute(String name):用来移除request中的域属性,如果参数name指定的域属性不存在,那么本方法什么都不做;

Enumeration getAttributeNames()获取所有域属性的名称

 

3request获取请求头数据

request与请求头相关的方法有:

String getHeader(String name)获取指定名称的请求头

Enumeration getHeaderNames():获取所有请求头名称

int getIntHeader(String name):获取值为int类型的请求头

 

4request获取请求相关的其它方法

request中还提供了与请求相关的其他方法,有些方法是为了我们更加便捷的方法请求头数据而设计,有些是与请求URL相关的方法。

int getContentLength()获取请求体的字节数,GET请求没有请求体,没有请求体返回-1;

String getContentType():获取请求类型,如果请求是GET,那么这个方法返回null;如果是POST请求,那么默认为application/x-www-form-urlencoded,表示请求体内容使用了URL编码;

String getMethod():返回请求方法,例如:GET

Locale getLocale():返回当前客户端浏览器的Locale。java.util.Locale表示国家和言语,这个东西在国际化中很有用;

String getCharacterEncoding():获取请求编码,如果没有setCharacterEncoding(),那么返回null,表示使用ISO-8859-1编码;

void setCharacterEncoding(String code)设置请求编码,只对请求体有效!注意,对于GET而言,没有请求体!!!所以此方法只能对POST请求中的参数有效!

String getContextPath():返回上下文路径,例如:/hello

String getQueryString():返回请求URL中的参数,例如:name=zhangSan

String getRequestURI():返回请求URI路径,例如:/hello/oneServlet

StringBuffer getRequestURL():返回请求URL路径,例如:http://localhost/hello/oneServlet,即返回除了参数以外的路径信息;

String getServletPath():返回Servlet路径,例如:/oneServlet

String getRemoteAddr():返回当前客户端的IP地址

String getRemoteHost():返回当前客户端的主机名,但这个方法的实现还是获取IP地址;

String getScheme():返回请求协议,例如:http;

String getServerName():返回主机名,例如:localhost

int getServerPort():返回服务器端口号,例如:8080

 

  System.out.println("request.getContentLength(): " + request.getContentLength());

  System.out.println("request.getContentType(): " + request.getContentType());

  System.out.println("request.getContextPath(): " + request.getContextPath());

  System.out.println("request.getMethod(): " + request.getMethod());

  System.out.println("request.getLocale(): " + request.getLocale());

 

  System.out.println("request.getQueryString(): " + request.getQueryString());

  System.out.println("request.getRequestURI(): " + request.getRequestURI());

  System.out.println("request.getRequestURL(): " + request.getRequestURL());

  System.out.println("request.getServletPath(): " + request.getServletPath());

  System.out.println("request.getRemoteAddr(): " + request.getRemoteAddr());

  System.out.println("request.getRemoteHost(): " + request.getRemoteHost());

  System.out.println("request.getRemotePort(): " + request.getRemotePort());

  System.out.println("request.getScheme(): " + request.getScheme());

  System.out.println("request.getServerName(): " + request.getServerName());

  System.out.println("request.getServerPort(): " + request.getServerPort());

 

4.1案例:request.getRemoteAddr():封IP

  可以使用request.getRemoteAddr()方法获取客户端的IP地址,然后判断IP是否为禁用IP。

  String ip = request.getRemoteAddr();

  System.out.println(ip);

  if(ip.equals("127.0.0.1")) {

    response. getWriter().print("您的IP已被禁止!");

  } else {

    response.getWriter().print("Hello!");

  }

 

5request获取请求参数

最为常见的客户端传递参数方式有两种:

浏览器地址栏直接输入:一定是GET请求

超链接:一定是GET请求

表单:可以是GET,也可以是POST,这取决<form>的method属性值

 

5.1、GET请求和POST请求的区别:

GET请求:

Ø 请求参数会在浏览器的地址栏中显示,所以不安全

Ø 请求参数长度限制长度在1K之内

Ø GET请求没有请求体无法通过request.setCharacterEncoding()来设置参数的编码

POST请求:

Ø 请求参数不会显示浏览器的地址栏,相对安全

Ø 请求参数长度没有限制

 

    <a href="/hello/ParamServlet?p1=v1&p2=v2">超链接</a>

  <!--hello是应用名,ParamServletServlet绑定URL路径,在问号后面的是请求参数,第一个参数是p1,值为v1,第二个参数为p2,值为v2-->

    <hr/>

    <form action="/hello/ParamServlet" method="post">

    参数1:<input type="text" name="p1"/><br/>

    参数2:<input type="text" name="p2"/><br/>

    <input type="submit" value="提交"/>

    </form>

 

下面是使用request获取请求参数的API:

String getParameter(String name):通过指定名称获取参数值

 

  //点击超链接是GET请求,所以会执行doGet()方法

  public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {

    String v1 = request.getParameter("p1");

    String v2 = request.getParameter("p2");

    System.out.println("p1=" + v1);

    System.out.println("p2=" + v2);

  }

   //提交表单是POST请求,所以会调用doPost()方法

  public void doPost(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {

    String v1 = request.getParameter("p1");

    String v2 = request.getParameter("p2");

    System.out.println("p1=" + v1);

    System.out.println("p2=" + v2);

  }

 

String[] getParameterValues(String name):当多个参数名称相同时,可以使用方法来获取;

<a href="/hello/ParamServlet?name=zhangSan&name=liSi">超链接</a><!--多个名为name的参数-->

  public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {

    String[] names = request.getParameterValues("name");//获取所有名为name的参数值

 

    System.out.println(Arrays.toString(names));//打印数组,输出结果为:[zhangSan, liSi]

 

  }

 

Enumeration getParameterNames()获取所有参数的名字

    <form action="/hello/ParamServlet" method="post">

    参数1:<input type="text" name="p1"/><br/>

    参数2:<input type="text" name="p2"/><br/>

    <input type="submit" value="提交"/>

    </form>

  public void doPost(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {

    Enumeration names = request.getParameterNames();//获取所有参数名称,输出结果为:p1和p2

 

    while(names.hasMoreElements()) {

      System.out.println(names.nextElement());

    }

  }

 

Map getParameterMap()获取所有参数封装到Map中,其中key为参数名,value为参数值,因为一个参数名称可能有多个值,所以参数值是String[],而不是String。

<a href="/day05_1/ParamServlet?p1=v1&p1=vv1&p2=v2&p2=vv2">超链接</a>

  Map<String,String[]> paramMap = request.getParameterMap();

  for(String name : paramMap.keySet()) {

    String[] values = paramMap.get(name);

    System.out.println(name + ": " + Arrays.toString(values));

  }

p2: [v2, vv2]

p1: [v1, vv1]

 

6请求转发和请求包含

无论是请求转发还是请求包含,都表示由多个Servlet共同来处理一个请求。例如Servlet1来处理请求,然后Servlet1又转发给Servlet2来继续处理这个请求。

 

6.1请求转发

在AServlet中,把请求转发到BServlet:

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    System.out.println("AServlet");

    response.setHeader("aaa", "AAA");//设置响应头

    RequestDispatcher rd = request.getRequestDispatcher("/BServlet");//获取调度器,其中参数为BServlet绑定的URL,即BServlet<url-pattern>值。

 

    rd.forward(request, response);//调用“调度器”的转发方法,该方法等同与告诉服务器,去调用BServletservice()方法一样。

 

  }

}

public class BServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    System.out.println("BServlet");

    response.getWriter().print("hello TwoServlet!");//设置响应体

  }

}

Aservlet

BServlet

 

6.2请求包含

在AServlet中,把请求包含到BServlet:

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    System.out.println("AServlet");

    response.setHeader("aaa", "AAA");//设置响应头

    response.getWriter().print("aaaa");//设置响应体

    RequestDispatcher rd = request.getRequestDispatcher("/BServlet");

    rd.include(request, response);

  }

}

public class BServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    System.out.println("BServlet");

    response.getWriter().print("hello TwoServlet!");//设置响应体

  }

}

Aservlet

BServlet

 

6.3请求转发与请求包含比较

如果在AServlet中请求转发到BServlet,那么在AServlet中就不允许再输出响应体,即不能再使用response.getWriter()和response.getOutputStream()向客户端输出,这一工作应该由BServlet来完成;如果是使用请求包含,那么没有这个限制;

请求转发虽然不能输出响应体,但还是可以设置响应头的,例如:response.setContentType(text/html;charset=utf-8);

请求包含大多是应用在JSP页面中,完成多页面的合并;

请求转发大多是应用在Servlet中,转发目标大多是JSP页面;

 

 

6.4请求转发与重定向比较

请求转发是一个请求,而重定向是两个请求

请求转发后浏览器地址栏不会有变化,而重定向会有变化,因为重定向是两个请求

请求转发的目标只能是本应用中的资源,重定向的目标可以是其他应用

请求转发对AServlet和BServlet的请求方法是相同的,即要么都是GET,要么都是POST,因为请求转发是一个请求;

重定向的第二个请求一定是GET

 

路径

1与路径相关的操作

超链接

表单

转发

包含

重定向

<url-pattern>

ServletContext获取资源

Class获取资源

ClassLoader获取资源

 

2客户端路径

超链接、表单、重定向都是客户端路径,客户端路径可以分为三种方式:

绝对路径;

以“/”开头的相对路径;

不以“/”开头的相对路径;

例如:http://localhost:8080/hello1/pages/a.html中的超链接和表单如下:

绝对路径:<a href="http://localhost:8080/hello2/index.html">链接1</a>

客户端路径:<a href="/hello3/pages/index.html">链接2</a>

相对路径:<a href="index.html">链接3</a>

<hr/>

绝对路径:

<form action="http://localhost:8080/hello2/index.html">

  <input type="submit" value="表单1"/>

</form>

客户端路径:

<form action="/hello2/index.html">

  <input type="submit" value="表单2"/>

</form>

相对路径:

<form action="index.html">

  <input type="submit" value="表单3"/>

</form>

 

链接1和表单1:没什么可说的,它使用绝对路径;

链接2和表单2:以“/”开头,相对主机,与当前a.html的主机相同,即最终访问的页面为http://localhost:8080/hello2/index.html;

链接3和表单3:不以“/”开头,相对当前页面的路径,即a.html所有路径,即最终访问的路径为:http://localhost:8080/hello1/pages/index.html;

 

重定向1:

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    response.sendRedirect("/hello/index.html");

  }

}

 

  假设访问AServlet的路径为:http://localhost:8080/hello/servlet/AServlet

  因为路径以“/”开头,所以相对当前主机,即http://localhost:8080/hello/index.html。

 

重定向2:

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    response.sendRedirect("index.html");

  }

}

 

假设访问AServlet的路径为:http://localhost:8080/hello/servlet/AServlet

因为路径不以“/”开头,所以相对当前路径,即http://localhost:8080/hello/servlet/index.html

 

2.1建议使用“/”

强烈建议使用“/”开头的路径,这说明在页面中的超链接和表单都要以“/”开头,后面是当前应用的名称,再是访问路径:

<form action="/hello/servlet/AServlet">

</form>

<a href="/hello/b.html">链接</a>

 

其中/hello是当前应用名称,这也说明如果将来修改了应用名称,那么页面中的所有路径也要修改,这一点确实是个问题。这一问题的处理方案会在学习了JSP之后讲解!

 

在Servlet中的重定向也建议使用“/”开头。同理,也要给出应用的名称!例如:

response.sendRedirect("/hello/BServlet");

 

其中/hello是当前应用名,如果将来修改了应用名称,那么也要修改所有重定向的路径,这一问题的处理方案是使用request.getContextPath()来获取应用名称。

response.sendRedirect(request.getContextPath() + "/BServlet");

 

3服务器端路径

服务器端路径必须是相对路径,不能是绝对路径。但相对路径有两种形式:

以“/”开头;

不以“/”开头;

 

其中请求转发、请求包含都是服务器端路径,服务器端路径与客户端路径的区别是:

客户端路径以“/”开头:相对当前主机;

服务器端路径以“/”开头:相对当前应用;

 

转发1:

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    request.getRequestDispatcher("/BServlet").forward(request, response);

  }

}

 

假设访问AServlet的路径为:http://localhost:8080/hello/servlet/AServlet

因为路径以“/”开头,所以相对当前主机,即http://localhost:8080/hello/BServlet。

 

转发2:

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {

    request.getRequestDispatcher("BServlet").forward(request, response);

  }

}

 

假设访问AServlet的路径为:http://localhost:8080/hello/servlet/AServlet

因为路径不以“/”开头,所以相对当前应用,即http://localhost:8080/hello/servlet/BServlet。

 

4<url-pattern>路径

  <url-pattern>必须使用“/”开头,并且相对的是当前应用

 

5ServletContext获取资源

必须是相对路径,可以“/”开头,也可以不使用“/”开头,但无论是否使用“/”开头都是相对当前应用路径

例如在AServlet中获取资源,AServlet的路径路径为:http://localhost:8080/hello/servlet/AServlet:

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException {

    String path1 = this.getServletContext().getRealPath("a.txt");

    String path2 = this.getServletContext().getRealPath("/a.txt");

    System.out.println(path1);

    System.out.println(path2);

  }

}

 

path1和path2是相同的结果:http://localhost:8080/hello/a.txt

 

6Class获取资源

Class获取资源也必须是相对路径,可以“/”开头,也可以不使用“/”开头。

package cn.itcast;

 

import java.io.InputStream;

 

public class Demo {

  public void fun1() {

    InputStream in = Demo.class.getResourceAsStream("/a.txt");

  }

  public void fun2() {

    InputStream in = Demo.class.getResourceAsStream("a.txt");

  }

}

 

其中fun1()方法获取资源时以“/”开头,那么相对的是当前类路径,即/hello/WEB-INF/classes/a.txt文件;

其中fun2()方法获取资源时没有以“/”开头,那么相对当前Demo.class所在路径,因为Demo类在cn.itcast包下,所以资源路径为:/hello/WEB-INF/classes/cn/itcast/a.txt。

 

7ClassLoader获取资源

ClassLoader获取资源也必须是相对路径,可以“/”开头,也可以不使用“/”开头。但无论是否以“/”开头,资源都是相对当前类路径

public class Demo {

  public void fun1() {

    InputStream in = Demo.class.getClassLoader().getResourceAsStream("/a.txt");

  }

  public void fun2() {

    InputStream in = Demo.class.getClassLoader().getResourceAsStream("a.txt");

  }

}

 

  fun1()和fun2()方法的资源都是相对类路径,即classes目录,即/hello/WEB-INF/classes/a.txt

 

编码

1请求编码

1.1直接在地址栏中给出中文

请求数据是由客户端浏览器发送服务器的,请求数据的编码是由浏览器决定的。例如在浏览器地址栏中给出:http://localhost:8080/hello/AServlet?name=传智,那么其中“传智”是什么编码的呢?不同浏览器使用不同的编码,所以这是不确定的!

IE:使用GB2312;

FireFox:使用GB2312;

Chrome:使用UTF-8;

 

  通常没有哪个应用要求用户在浏览器地址栏中输入请求数据的

 

1.2在页面中发出请求

通常向服务器发送请求数据都需要先请求一个页面,然后用户在页面中输入数据。页面中有超链接和表单,通过超链接和表单就可以向服务器发送数据了。

因为页面是服务器发送到客户端浏览器的,所以这个页面本身的编码由服务器决定。而用户在页面中输入的数据也是由页面本身的编码决定的

index.html

<!DOCTYPE html>

<html>

  <head>

    <title>index.html</title>

   <!--这就相当于给客户端发送了响应头content-type,指定当前页面的编码为utf-8-->

    <meta http-equiv="content-type" content="text/html; charset=UTF-8">

  </head>

  <body>

  <form action="/hello/servlet/AServlet">

    名称:<input type="text" name="name"/>

    <input type="submit" value="提交"/>

  </form>

  <a href="/hello/servlet/AServlet?name=传智">链接</a>

  </body>

</html>

 

当用户在index.html页面中输入数据时,都是UTF-8列表的。因为这个页面本身就是UTF-8编码的!

页面的编就是页面中输入数据的编码。

 

1.3GET请求解读编码

当客户端通过GET请求发送数据给服务器时,使用request.getParameter()获取的数据是被服务器误认为ISO-8859-1编码的,也就是说客户端发送过来的数据无论是UTF-8还是GBK,服务器都认为是ISO-8859-1,这就说明我们需要在使用request.getParameter()获取数据后,再转发成正确的编码

例如客户端以UTF-8发送的数据,使用如下转码方式:

String name = request.getParameter(name);

name = new String(name.getBytes(“iso-8859-1), utf-8);

 

1.4POST请求解读编码

  当客户端通过POST请求发送数据给服务器时,可以在使用request.getParameter()获取请求参数之前先通过request.setCharacterEncoding()来指定编码,然后再使用reuqest.getParameter()方法来获取请求参数,那么就是用指定的编码来读取了。

也就是说,如果是POST请求,服务器可以指定编码!但如果没有指定编码,那么默认还是使用ISO-8859-1来解读。

request.setCharacterEncoding(utf-8);

String name = request.getParameter(name);

 

package com.li.servlet;

 

import java.io.IOException;

import java.io.PrintWriter;

 

import javax.servlet.ServletException;

import javax.servlet.http.HttpServlet;

import javax.servlet.http.HttpServletRequest;

import javax.servlet.http.HttpServletResponse;

 

public class AServlet extends HttpServlet {

  public void doGet(HttpServletRequest request, HttpServletResponse response)throws ServletException, IOException {

    /*

     * 1. 先获取来使用iso的错误字符串

     * 2. (iso)回退,(使用utf-8)重编

     */

    String name = request.getParameter("username");

    byte[] b = name.getBytes("iso-8859-1");

    name = new String(b, "utf-8");

 

    System.out.println(name);

  }

  @Override

  public void doPost(HttpServletRequest req, HttpServletResponse resp)throws ServletException, IOException {

    /*

     * 1. 在获取参数之前,需要先调用request.setCharacterEncoding("utf-8");

     * 2. 使用getParameter()来获取参数

     */

    req.setCharacterEncoding("utf-8");

    String username = req.getParameter("username");

    System.out.println(username);

  }

}

 

2响应编码

响应:服务器发送给客户端数据!响应是由response对象来完成,如果响应的数据不是字符数据,那么就无需去考虑编码问题。当然,如果响应的数据是字符数据,那么就一定要考虑编码的问题了。

response.getWriter().print(传智);

上面代码因为没有设置repsonse.getWriter()字符流的编码,所以服务器使用默认的编码(ISO-8859-1)来处理,因为ISO-8859-1不支持中文,所以一定会出现码的。

所以在使用response.getWriter()发送数据之前,一定要设置response.getWriter()的编码,这需要使用response.setCharacterEncoding()方法:

response.setCharacterEncoding(utf-8);

response.getWriter().print(传智);

上面代码因为在使用response.getWriter()输出之前已经设置了编码,所以输出的数据为utf-8编码。但是,因为没有告诉浏览器使用什么编码来读取响应数据,所以很可能浏览器会出现错误的解读,那么还是会出现乱码的。当然,通常浏览器都支持来设置当前页面的编码,如果用户在看到编码时,去设置浏览器的编码,如果设置的正确那么乱码就会消失。但是我们不能让用户总去自己设置编码,而且应该直接通知浏览器,服务器发送过来的数据是什么编码,这样浏览器就直接使用服务器告诉他的编码来解读!这需要使用content-type响应头。

response.setContentType(text/html;charset=utf-8);

response.getWriter().print(传智);

  上面代码使用setContentType()方法设置了响应头content-type编码为utf-8,这不只是在响应中添加了响应头,还等于调用了一次response.setCharacterEncoding(utf-8),也就是说,通过我们只需要调用一次response.setContentType(text/html;charset=utf-8)即可,而无需再去调用response.setCharacterEncoding(utf-8)了。

 

在静态页面中,使用<meta>来设置content-type响应头,例如:

<meta http-equiv="content-type" content="text/html; charset=UTF-8">

 

3URL编码

通过页面传输数据给服务器时,如果包含了一些特殊字符是无法发送的。这时就需要先把要发送的数据转换成URL编码格式,再发送给服务器。

其实需要我们自己动手给数据转换成URL编码的只有GET超链接,因为表单发送数据会默认使用URL编码,也就是说,不用我们自己来编码。

例如:“传智”这两个字通过URL编码后得到的是:“%E4%BC%A0%E6%99%BA”。URL编码是先需要把“传智”转换成字节,例如我们现在使用UTF-8把“传智”转换成字符,得到的结果是:“[-28, -68, -96, -26, -103, -70]”,然后再把所有负数加上256,得到[228, 188, 160, 230, 153, 186],再把每个int值转换成16进制,得到[E4, BC, A0, E6, 99, BA],最后再每个16进制的整数前面加上“%”

通过URL编码,把“传智”转换成了“%E4%BC%A0%E6%99%BA”,然后发送给服务器!服务器会自动识别出数据是使用URL编码过的,然后会自动把数据转换回来。

 

当然,在页面中我们不需要自己去通过上面的过程把“传智”转换成“%E4%BC%A0%E6%99%BA”,而是使用Javascript来完成即可。当后面我们学习了JSP后,就不用再使用Javascript了。

  <script type="text/javascript">

  function _go() {

    location = "/day05_2/AServlet?name=" + encodeURIComponent("传智+播客");

  }

  </script>

<a href="javascript:_go();">链接</a>

 

因为URL默认只支持ISO-8859-1,这说明在URL中出现中文和一些特殊字符可能无法发送到服务器。所以我们需要对包含中文或特殊字符的URL进行URL编码。

服务器会自动识别数据是否使用了URL编码,如果使用了服务器会自动把数据解码,无需我们自己动手解码。

posted on 2017-09-28 14:41  未来_我来  阅读(667)  评论(0编辑  收藏  举报

2 3
4