有关React生命周期:

1、组件生命周期的执行次数是什么样子的???

   只执行一次: constructor、componentWillMount、componentDidMount

  执行多次:render 、子组件的componentWillReceiveProps、componentWillUpdate、componentDidUpdate

  有条件的执行:componentWillUnmount(页面离开,组件销毁时)

  不执行的:根组件(ReactDOM.render在DOM上的组件)的componentWillReceiveProps(因为压根没有父组件给传递props)

 

2、组件的生命周期执行顺序是什么样子的???

  假设组件嵌套关系是  App里有parent组件,parent组件有child组件。

     如果不涉及到setState更新,第一次渲染的顺序如下:

App:   constructor --> componentWillMount -->  render --> 
parent: constructor --> componentWillMount -->  render --> 
child:    constructor --> componentWillMount -->  render  --> 
componentDidMount (child) -->  componentDidMount (parent) --> componentDidMount (App)

 

   这时候触发App的setState事件

App:   componentWillUpdate --> render --> 
parent: componentWillReceiveProps --> componentWillUpdate --> render --> 
child:    componentWillReceiveProps --> componentWillUpdate --> render -->
componentDidUpdate (child) -->  componentDidUpdate (parent) --> componentDidUpdate (App)

 

那如果是触发parent的setState呢?

parent: componentWillUpdate --> render --> 
child:     componentWillReceiveProps --> componentWillUpdate --> render --> 
componentDidUpdate (child) -->  componentDidUpdate (parent) 

 

那如果是只是触发了child组件自身的setState呢?

child: componentWillUpdate --> render -->  componentDidUpdate (child)

 

结论

1、如图:完成前的顺序是从根部到子部,完成时时从子部到根部。(类似于事件机制)

2、每个组件的红线(包括初次和更新)生命周期时一股脑执行完毕以后再执行低一级别的红线生命周期。

3、第一级别的组件setState是不能触发其父组件的生命周期更新函数,只能触发更低一级别的生命周期更新函数

 

总结起来就如下图:

 

 提问:那么这里提一个问题,如果App里面有多个parent1 parent2 ...,parent里由多个child,那么生命周期执行顺序应该时什么样的????

结论:一套组件(父包括子,子包括孙)执行的时候一个整体,执行完毕在执行下一套,用到这里就是App里先执行parent1和parent1的子,子的子。。。,然后完毕再执行parent2这一套。

 

 3、什么时候该用componentWillReceiveProps?

    是否每个子组件都需要componentWillReceiveProps生命周期函数来更新数据吗? 你的原则是??

 

A、开始前首先需要知道componentWillReceiveProps函数有一个参数nextProps,它是一个 { 对象 } ,从单词就可以看出它是update时候(也就是下一次)父组件传递过来的props

B、还要知道 "第一条中" 所讲解的有些生命周期函数只执行一次,而有的执行多次,其中componentWillReceiveProps执行多次,而constructor等执行一次

C、还需知道在子组件中每次传递过来的this.props对象其实和componentWillReceiveProps的nextProps是一样的,都是最新的

D、由"第一条"得知: componentWillReceiveProps生命周期是在更新子组件最先执行的,优先于compoentWillUpdate,更优先于render。

E、render函数里不能使用setState(),否则会造成死循环。

 

那么知道了以上呢?  

 

由C得知,  this.props  和  componentWillReceiveProps的nextProps都是一样的,通过this.props就可以取到最新的值, 那么componentWillReceiveProps还有必要吗?

所以:大部分情况下 componentWillReceiveProps 生命周期函数是没用的,即可以略去不写,因为它确实没什么用

 

但是情况1:

  由D得知,componentWillReceiveProps是最先执行的,所以在其内可以setState({}),在接下来的render中能拿到最新的state后值,再加上B得知,

如果是下面这种情况: 在constructor函数中初始化了某个state,必须用 componentWillReceiveProps 来更新state,以便render中为新的state值

 

 情况2:

  如果父组件有一些请求,每次参数更新的时候才发请求,同时和子组件的关系比较密切,

可以将数据请求放在componentWillReceiveProps进行执行,需要传的参数则从(nextProps)中获取。

而不必将所有的请求都放在父组件中,于是该请求只会在该组件渲染时才会发出,从而减轻请求负担

 

 情况3:

  watch监听props值变化,对子组件进行处理,比如:当传入的props.value发生变化,执行一些动作。 

  如果你接触过vue,会知道vue中有一个关于watch的选项,是根据setter获取新旧值,进行动作的执行

  而react中最合适做watch的时机是在componentWillReceiveProps中

componentWillReceiveProps(nextProps) {
        // this.props中的值是旧值
        // nextProps中的值是新值
    const { value: oldValue } = this.props;
    const { value: newValue } = nextProps;
    if (newValue !== oldValue) {
            // TODO...
    }
}

 

结论: 大部分情况下 componentWillReceiveProps 生命周期函数是没用的,即可以略去不写,

但是在constructor函数中初始化了某个state,必须用 componentWillReceiveProps 来更新state,不可省去,否则render中的state将得不到更新。
同时如果您想在子组件监听watch值变化做处理,也可以用到componentWillReceiveProps

注意:使用componentWillReceiveProps的时候,不要去向上分发,调用父组件的相关setState方法,否则会成为死循环。

 

 

posted on 2018-06-23 01:42  一直在寻  阅读(10385)  评论(0编辑  收藏  举报