OPENCV形态学算法-2

一.漫水填充算法

该算法通过一个指定的种子点,来分析整张图片上的像素,并设置像素差异阈值,在阈值类的点,最后变成相同的颜色.该方法通过上下限和连通方式来达到不同的连通效果.

该方法常用与标记和分离图像的一部分,以便于对其做进一步的分析和处理,填充的结果总是连通的区域.

API:void floodFill(源图像,掩码,Point 种子点,scaral 染色值,Rect* 重绘区域的最小边界矩形区域,scaral 与种子点颜色的负差最大值,scaral 与种子点颜色的正差最大值,int 操作方式);

注:1掩码的大小和源图像相同,掩码中不为0的区域,对应的原图中坐标的像素,在处理的时候将被忽略.

2.最小矩形是一个可选参数,默认为0

3.操作方式的第八位为4,则连通时只会向水平垂直方向蔓延,为8,还包括对角线蔓延,高八位为FLOOD_FIXED_RANGE时,上下限是和种子点颜色相比,否则,是当前像素和相邻像素差

实际使用代码如下

Mat srcImage;
Mat dstImage;
Point mousePoint;
const int g_newValueMax = 255;
int g_newValue;
const int g_lodiffMax = 255;
int g_lodiffValue;
const int g_updiffMax = 255;
int g_updiffValue;

void onMouseEvent(int eventID,int x,int y,int flag,void* userData);
void onTrackBarNewValue(int pos,void* userData);
void onTrackBarLoDiffValue(int pos,void* userData);
void onTrackBarUpDiffValue(int pos,void* userData);


int main(void)
{
   srcImage = imread("F:\\opencv\\OpenCVImage\\floodFill.jpg");
   namedWindow("floodfill image");
   namedWindow("src image");
   
   mousePoint = Point(-1,-1);
   g_newValue = 100;
   g_lodiffValue = 25;
   g_updiffValue = 25;
   setMouseCallback("src image", onMouseEvent);
   createTrackbar("new value", "src image", &g_newValue, g_newValueMax,onTrackBarNewValue);
   createTrackbar("updiff value", "src image", &g_updiffValue, g_updiffMax,onTrackBarUpDiffValue);
   createTrackbar("lodiff value", "src image", &g_lodiffValue, g_lodiffMax,onTrackBarLoDiffValue);
   onTrackBarLoDiffValue(g_lodiffValue, 0);
   
   
   imshow("src image", srcImage);
   
   moveWindow("src image", 0, 0);
   moveWindow("floodfill image", srcImage.cols, 0);
   
   waitKey(0);
   return 0;
}

void onMouseEvent(int eventID,int x,int y,int flag,void* userData)
{
   if(eventID == EVENT_LBUTTONDOWN)
   {
       mousePoint = Point(x,y);
       onTrackBarNewValue(g_newValue, 0);
   }
}

void onTrackBarNewValue(int pos,void* userData)
{
   if(mousePoint.x >= 0 && mousePoint.y >=0)
   {
       Rect rect;
       Mat tempImage;
       tempImage = srcImage.clone();
       floodFill(srcImage, mousePoint, Scalar(g_newValue,g_newValue,g_newValue),&rect,Scalar(g_lodiffValue,g_lodiffValue,g_lodiffValue),Scalar(g_updiffValue,g_updiffValue,g_updiffValue),4|FLOODFILL_FIXED_RANGE);
       dstImage = srcImage.clone();
       srcImage = tempImage.clone();
       imshow("floodfill image", dstImage);
   }
   else
   {
       dstImage = srcImage.clone();
       imshow("floodfill image", dstImage);
   }
}
void onTrackBarLoDiffValue(int pos,void* userData)
{
   if(mousePoint.x >= 0 && mousePoint.y >=0)
   {
       Rect rect;
       Mat tempImage;
       tempImage = srcImage.clone();
       floodFill(srcImage, mousePoint, Scalar(g_newValue,g_newValue,g_newValue),&rect,Scalar(g_lodiffValue,g_lodiffValue,g_lodiffValue),Scalar(g_updiffValue,g_updiffValue,g_updiffValue),8|FLOODFILL_FIXED_RANGE);
       dstImage = srcImage.clone();
       srcImage = tempImage.clone();
       imshow("floodfill image", dstImage);
   }
   else
   {
       dstImage = srcImage.clone();
       imshow("floodfill image", dstImage);
   }
}
void onTrackBarUpDiffValue(int pos,void* userData)
{
   if(mousePoint.x >= 0 && mousePoint.y >=0)
   {
       Rect rect;
       Mat tempImage;
       tempImage = srcImage.clone();
       floodFill(srcImage, mousePoint, Scalar(g_newValue,g_newValue,g_newValue),&rect,Scalar(g_lodiffValue,g_lodiffValue,g_lodiffValue),Scalar(g_updiffValue,g_updiffValue,g_updiffValue),8|FLOODFILL_FIXED_RANGE);
       dstImage = srcImage.clone();
       srcImage = tempImage.clone();
       imshow("floodfill image", dstImage);
   }
   else
   {
       dstImage = srcImage.clone();
       imshow("floodfill image", dstImage);
   }
}

二.图像金字塔

图像金字塔是一种对图像进行向上采样或者向下采样的算法,所谓向上向下采样,实际上就是放大图像缩小图像.

图像金字塔分为高斯金字塔和拉普拉斯金字塔,高斯金字塔向下采样,降低分辨力,拉普拉斯金字塔配合高斯金字塔,向上还原源图像

下一层图像的面积是源图像面积的1/4,采样函数分别为pyrUp和pyrDown两个函数并不是互逆的,pyrDown是一个会丢失信息的函数.

API:void pyrUp(源图,目的图,Size 放大系数,int 边缘类型)

注:向上采样并放大图像,目的图和源图的通道,深度一致,放大系数有默认值,源图长*2 宽*2

API:void pyrDown(源图,目的图,Size 放大系数,int 边缘类型)

注:向下采样并模糊一张图片,图片尺寸有默认值源图长/2 源图宽/2,整体是源图的四分之一.

使用例程如下

Mat srcImage;
//图像放大
Mat pyrupImage;
Mat pyrupShowImage;
const int g_pyrupMax = 10;
int g_pyrupCount;
void onTrackBarPyrup(int pos,void* userData);

//图像缩小
Mat pyrdownImage;
Mat pyrdownShowImage;
const int g_pyrdownMax = 10;
int g_pyrdownCount;
void onTrackBarPyrdown(int pos,void* userData);

int main(int argc,char* argv[])
{
   srcImage = imread("F:\\opencv\\OpenCVImage\\pyr.jpg");
   if(srcImage.empty())
   {
       return -1;
   }
   namedWindow("src image");
   namedWindow("pyrup image");
   namedWindow("pyrdown image");
   
   g_pyrupCount = 1;
   createTrackbar("pyrup count", "pyrup image", &g_pyrupCount, g_pyrupMax,onTrackBarPyrup,0);
   onTrackBarPyrup(g_pyrupCount,0);
   
   g_pyrdownCount = 1;
   createTrackbar("pyrdown count", "pyrdown image", &g_pyrdownCount, g_pyrdownMax,onTrackBarPyrdown,0);
   onTrackBarPyrdown(g_pyrdownCount, 0);
   
   imshow("src image", srcImage);
   
   moveWindow("src image", 0, 0);
   moveWindow("pyrup image", srcImage.cols, 0);
   moveWindow("pyrdown image", srcImage.cols*2, 0);

   waitKey(0);
   return 0;
}
//图像放大
void onTrackBarPyrup(int pos,void* userData)
{
   if(pos == 0)
   {
       imshow("pyrup image", srcImage);
   }
   else
   {
       Mat tempImage;
       tempImage = srcImage.clone();
       for(int i = 0; i < pos; i++)
       {
           pyrUp(tempImage, pyrupImage);
           tempImage = pyrupImage.clone();
       }
       if(pyrupImage.cols > srcImage.cols && pyrupImage.rows > srcImage.rows)
       {
           //pyrupShowImage = pyrupImage(Range(0,srcImage.rows),Range(0,srcImage.cols));
           imshow("pyrup image", pyrupImage);
       }
       else
       {
           imshow("pyrup image", pyrupImage);
       }
   }
}
//图像缩小
 void onTrackBarPyrdown(int pos,void* userData)
 {
     if(pos == 0)
     {
         imshow("pyrdown image", srcImage);
     }
     else
     {
         Mat tempImage;
         tempImage = srcImage.clone();
         for(int i = 0; i < pos; i++)
         {
             pyrDown(tempImage, pyrdownImage);
             tempImage = pyrdownImage.clone();
         }
         if(pyrdownImage.cols > srcImage.cols && pyrdownImage.rows > srcImage.rows)
         {
             pyrdownShowImage = pyrdownImage(Range(0,srcImage.rows),Range(0,srcImage.cols));
             imshow("pyrdown image", pyrdownShowImage);
         }
         else
         {
             imshow("pyrdown image", pyrdownImage);
         }
     }
 }

三.图像大小重新调整resize

resize用于将源目标精确的转换为指定大小的目标图像,在图像放大缩小的时候很有用

API: void resize(源,目标,Size 目标尺寸,double x方向缩放系数,double y方向上缩放系数,int 差值方式)

注:x方向缩放系数默认值0,函数自动根据源图像大小和目标尺寸计算,y方向缩放系数也是一样.插值方式决定了放大缩小以后的效果,主要有如下几种插值方法 INTER_LINE 线性插值INTER_NEAREST 最近邻插值 INNER_CUBIC 4*4区域内三次样条插值INNER_AREA 区域插值INNER_LANCZOS4 8*8区域内邻域插值.

插值方式的选择对于多次resize有很大影响,例子如下

//图像重新设置大小 resize
Mat srcImage;
const int g_resizeMax = 1000;
int g_resizeValue = 0;
Mat resizeImage;
void onTrackBarResize(int pos,void* userData);


int main(int argc,char* argv[])
{
   srcImage = imread("F:\\opencv\\OpenCVImage\\resize.jpg");
   
   namedWindow("src image");
   namedWindow("resize image");
   
   g_resizeValue = srcImage.rows;
   createTrackbar("size value", "resize image", &g_resizeValue, g_resizeMax,onTrackBarResize,0);
   onTrackBarResize(g_resizeValue, 0);
   
   imshow("src image", srcImage);
   
   moveWindow("src image", 0, 0);
   moveWindow("resize image", srcImage.cols, 0);
   
   waitKey(0);
   return 0;
}

void onTrackBarResize(int pos,void* userData)
{
   if(pos == 0)
   {
       imshow("resize image", srcImage);
   }
   else
   {
       //INTER_LINEAR INTER_CUBIC INTER_AREA INTER_NEAREST
       resize(srcImage, resizeImage, Size(g_resizeValue,g_resizeValue),0,0,INTER_NEAREST);
       imshow("resize image", resizeImage);
   }
}

四:图像的阈值化

图像的阈值化是指通过一些算法和决策手段,将图像中的像素编程两种指定像素的集合,例如,将灰度图转换成完全的黑白图,或者直接提出低于或者高于一定值的像素.

图像的阈值化在某些场合下,对于图像的边缘提取十分有效果.

API: void Threshold(源图,目标图,double 阈值,double 最大值,int 阈值类型)

注:1.源和目标图都必须是单通道灰度图像

2.阈值类型决定了阈值化以后,图像中将仅存在哪两种像素点

THRESH_BINARY 低于阈值为0 高于阈值为给定最大值

THRESH_BINARY_INV 低于阈值为给定最大值高于阈值为0

THRESH_TRUNC 低于阈值,保持原来像素不变,高于阈值,为阈值

THRESH_TOZERO 低于阈值为0,高于阈值保持原来值比边

THRESH_TOZERO_INV 低于阈值保持原来值比边,高于阈值为0

API:void adaptiveThreshold(源,目的,double 最大值,int 自适应算法类型,int 阈值类型,int 自适应算法的邻域尺寸,double 减去平均或者加权平均中的常数值).

注:该算法是自适应阈值化,自动根据邻域中一个范围的值确定某一点的确定像素阈值,源和目的都需要时单通道图像,阈值类型必须为THRESH_BINARY或者是THRESH_BINARY_INV的一种,自适应算法有两种选择,ADAPTIVE_THRESH_MEAN_C 以邻域尺寸内平均值为阈值,ADAPTIVE_THRESH_GAUSSIAN_C 邻域矩阵值与高斯窗口函数交叉相关的加权综合

使用例程如下

Mat srcImage;
Mat srcSingleImage;

//正y常¡ê阈D值¦Ì化¡¥
Mat thresholdImage;
const int g_thresholdMax = 255;
int g_thresholdValue;
const int g_thresholdMaxMax = 255;
int g_thresholdMaxValue;

void onTrackBarThresholdValue(int pos,void* userData);
void onTrackBarThresholdMax(int pos,void* userData);


//自Á?适º¨º应®|阈D值¦Ì化¡¥
Mat adaptiveThresholdImage;
const int g_adaptiveThresholdMaxMax = 255;
int g_adaptiveThresholdMaxValue;

void onTrackBarAdaptiveThresholdMax(int pos,void* userData);


int main(int argc,char* argv[])
{
   srcImage = imread("F:\\opencv\\OpenCVImage\\adaptiveThreshold.png");
   if(srcImage.channels() == 1)
   {
       srcSingleImage = srcImage(Range(0,srcImage.rows),Range(0,srcImage.cols));
   }
   else
   {
       srcSingleImage = Mat(srcImage.rows, srcImage.cols, CV_8UC1);
       cvtColor(srcImage, srcSingleImage, CV_RGB2GRAY);
   }
   
   namedWindow("src image");
   
   g_thresholdValue = 100;
   g_thresholdMaxValue = 255;
   namedWindow("threshold image");
   createTrackbar("threshold max", "threshold image", &g_thresholdMaxValue, g_thresholdMaxMax,onTrackBarThresholdMax,0);
   createTrackbar("threshold value", "threshold image", &g_thresholdValue, g_thresholdMax,onTrackBarThresholdValue,0);
   onTrackBarThresholdValue(g_thresholdValue, 0);
   
   g_adaptiveThresholdMaxValue = 255;
   namedWindow("adaptiveThreshold image");
   createTrackbar("adaptiveThreshold Max", "adaptiveThreshold image", &g_adaptiveThresholdMaxValue, g_adaptiveThresholdMaxMax,onTrackBarAdaptiveThresholdMax,0);
   onTrackBarAdaptiveThresholdMax(g_adaptiveThresholdMaxValue, 0);
   
   imshow("src image", srcSingleImage);
   
   moveWindow("src image", 0, 0);
   moveWindow("threshold image", srcSingleImage.cols, 0);
   moveWindow("adaptiveThreshold image", srcSingleImage.cols*2, 0);
   
   waitKey(0);
   return 0;
}



//正y常¡ê阈D值¦Ì化¡¥,需¨¨要°a指?定¡§阈D值¦Ì以°?及¡ã最Á?大ä¨®值¦Ì
void onTrackBarThresholdValue(int pos,void* userData)
{
   if (g_thresholdMaxValue == 0)
   {
       imshow("threshold image", srcSingleImage);
   }
   else
   {
       threshold(srcSingleImage, thresholdImage, g_thresholdValue, (double)g_thresholdMaxValue, THRESH_BINARY);
       imshow("threshold image", thresholdImage);
   }
}
void onTrackBarThresholdMax(int pos,void* userData)
{
   if (g_thresholdMaxValue == 0)
   {
       imshow("threshold image", srcSingleImage);
   }
   else
   {
       threshold(srcSingleImage, thresholdImage, g_thresholdValue, (double)g_thresholdMaxValue, THRESH_BINARY);
       imshow("threshold image", thresholdImage);
   }
}


//自适应阈值化,只需要指定最大值就好了
void onTrackBarAdaptiveThresholdMax(int pos,void* userData)
{
   if(g_adaptiveThresholdMaxValue == 0)
   {
       imshow("adaptiveThreshold image", srcSingleImage);
   }
   else
   {
       adaptiveThreshold(srcSingleImage, adaptiveThresholdImage, g_adaptiveThresholdMaxValue, THRESH_BINARY, ADAPTIVE_THRESH_MEAN_C, 7, 0);
       imshow("adaptiveThreshold image", adaptiveThresholdImage);
   }
}

posted @ 2016-03-07 22:43 邓小俊阅读(930) 评论(0) 编辑收藏举报

会员力量，点亮园子希望

刷新页面返回顶部

邓小俊

OPENCV形态学算法-2

公告