CentOS 7 下升级OpenSSH 7.4p1到OpenSSH 8.4p1

 

文章目录

 

一、环境介绍

`openssh版本`
[root@localhost ~]# openssl version
OpenSSL 1.0.2k-fips  26 Jan 2017
[root@localhost ~]# ssh -V
OpenSSH_7.4p1, OpenSSL 1.0.2k-fips  26 Jan 2017

`linux发行版和内核`
[root@localhost ~]# cat /etc/os-release
NAME="CentOS Linux"
VERSION="7 (Core)"
ID="centos"
ID_LIKE="rhel fedora"
VERSION_ID="7"
PRETTY_NAME="CentOS Linux 7 (Core)"
ANSI_COLOR="0;31"
CPE_NAME="cpe:/o:centos:centos:7"
HOME_URL="https://www.centos.org/"
BUG_REPORT_URL="https://bugs.centos.org/"

CENTOS_MANTISBT_PROJECT="CentOS-7"
CENTOS_MANTISBT_PROJECT_VERSION="7"
REDHAT_SUPPORT_PRODUCT="centos"
REDHAT_SUPPORT_PRODUCT_VERSION="7"
[root@localhost ~]# uname -r
3.10.0-957.el7.x86_64

二、安装配置telnet

2.1、安装telnet-server

[root@localhost ~]# yum -y install xinetd telnet-server

2.2、配置telnet

`先看一下xinetd.d目录下是否有telnet文件`
[root@localhost ~]# ll /etc/xinetd.d/telnet
ls: cannot access /etc/xinetd.d/telnet: No such file or directory
`如果有，则将文件里面的disable = no改成disable = yes`
`如果没有，就进行下面的操作`
[root@localhost ~]# cat > /etc/xinetd.d/telnet <<EOF
service telnet
{
    disable = yes
    flags       = REUSE
    socket_type = stream
    wait        = no
    user        = root
    server      = /usr/sbin/in.telnetd
    log_on_failure  += USERID
}
EOF

2.3、配置telnet登录的终端类型

[root@localhost ~]# cat >> /etc/securetty <<EOF
pts/0
pts/1
pts/2
pts/3
EOF

2.4、启动telnet服务

[root@localhost ~]# systemctl enable xinetd --now
[root@localhost ~]# systemctl enable telnet.socket --now
[root@localhost ~]# ss -nltp | grep 23
LISTEN     0      128         :::23                      :::*                   users:(("systemd",pid=1,fd=46))
`23端口起来了，表示telnet服务正常运行`

三、切换登录方式为telnet

  • 后面的操作都是在telnet链接的方式下进行，避免ssh中断导致升级失败
  • 以telnet方式登录的时候，注意选择协议和端口，协议为telnet，端口为23

四、开始升级OpenSSH

4.1、下载升级所需依赖包

[root@localhost ~]# yum -y install gcc gcc-c++ glibc make autoconf openssl openssl-devel pcre-devel  pam-devel

4.2、下载OpenSSL和OpenSSH

  • openssl官网：https://www.openssl.org/
  • openssh官网：http://www.openssh.com/
[root@localhost ~]# wget https://www.openssl.org/source/openssl-1.1.1i.tar.gz
[root@localhost ~]# wget http://ftp.openbsd.org/pub/OpenBSD/OpenSSH/portable/openssh-8.4p1.tar.gz
[root@localhost ~]# tar xf openssl-1.1.1i.tar.gz
[root@localhost ~]# tar xf openssh-8.4p1.tar.gz

4.3、编译安装OpenSSL

`开始之前，先备份一下原有的OpenSSL文件`
[root@localhost ~]# mv /usr/bin/openssl{,.bak}
[root@localhost ~]# mv /usr/include/openssl{,.bak}

[root@localhost ~]# cd openssl-1.1.1i/
[root@localhost openssl-1.1.1i]# ./config shared && make && make install

`编译完成后，可以在/usr/local目录下找到openssl的二进制文件和目录`
[root@localhost ~]# ll /usr/local/bin/openssl
-rwxr-xr-x 1 root root 749136 Jan 14 14:25 /usr/local/bin/openssl
[root@localhost ~]# ll -d /usr/local/include/openssl/
drwxr-xr-x 2 root root 4096 Jan 14 14:25 /usr/local/include/openssl/

`建立软连接`
[root@localhost ~]# ln -s /usr/local/bin/openssl /usr/bin/openssl
[root@localhost ~]# ln -s /usr/local/include/openssl/ /usr/include/openssl
[root@localhost ~]# ll /usr/bin/openssl
lrwxrwxrwx 1 root root 22 Jan 14 14:32 /usr/bin/openssl -> /usr/local/bin/openssl
[root@localhost ~]# ll -d /usr/include/openssl
lrwxrwxrwx 1 root root 27 Jan 14 14:33 /usr/include/openssl -> /usr/local/include/openssl/

`重新加载配置，验证openssl版本`
[root@localhost ~]# echo "/usr/local/lib64" >> /etc/ld.so.conf
[root@localhost ~]# /sbin/ldconfig
[root@localhost ~]# openssl version
OpenSSL 1.1.1i  8 Dec 2020
4.3.1、可能会有的一些报错和解决方法
[root@localhost ~]# openssl version
openssl: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory
"这是因为libssl.so.1.1文件找不到，执行find / -name 'libssl.so.1.1'，将/etc/ld.so.conf里面的lib64改成find出来的路径即可"

[root@localhost ~]# find / -name "openssl"
"编译完，可以用上面的find命令看一下openssl所在的路径，以及include/openssl所在的路径"

4.4、编译安装OpenSSH

`备份原有的ssh目录`
[root@localhost ~]# mv /etc/ssh{,.bak}
[root@localhost ~]# mkdir /usr/local/openssh
[root@localhost ~]# cd openssh-8.4p1/
[root@localhost openssh-8.4p1]# ./configure --prefix=/usr/local/openssh \
--sysconfdir=/etc/ssh \
--with-openssl-includes=/usr/local/include \
--with-ssl-dir=/usr/local/lib64 \
--with-zlib \
--with-md5-passwords \
--with-pam  && \
make && \
make install
4.4.1、配置sshd_config文件
[root@localhost ~]# echo "UseDNS no" >> /etc/ssh/sshd_config
[root@localhost ~]# echo 'PermitRootLogin yes' >> /etc/ssh/sshd_config
[root@localhost ~]# echo 'PubkeyAuthentication yes' >> /etc/ssh/sshd_config
[root@localhost ~]# echo 'PasswordAuthentication yes' >> /etc/ssh/sshd_config

`如果是图形化界面，需要x11的话，需要配置如下`
[root@localhost ~]# echo "X11Forwarding yes" >> /etc/ssh/sshd_config
[root@localhost ~]# echo "X11UseLocalhost no" >> /etc/ssh/sshd_config　　　　　　　　　　　　　　　　
[root@localhost ~]# echo "XAuthLocation /usr/bin/xauth" >> /etc/ssh/sshd_config
4.4.2、创建新的sshd二进制文件
[root@localhost ~]# mv /usr/sbin/sshd{,.bak}
[root@localhost ~]# mv /usr/bin/ssh{,.bak}
[root@localhost ~]# mv /usr/bin/ssh-keygen{,.bak}
[root@localhost ~]# ln -s /usr/local/openssh/bin/ssh /usr/bin/ssh
[root@localhost ~]# ln -s /usr/local/openssh/bin/ssh-keygen /usr/bin/ssh-keygen
[root@localhost ~]# ln -s /usr/local/openssh/sbin/sshd /usr/sbin/sshd
`查看openssh当前版本`
[root@localhost ~]# ssh -V
OpenSSH_8.4p1, OpenSSL 1.1.1i  8 Dec 2020
4.4.3、重新启动openssh服务
[root@localhost ~]# mv /usr/lib/systemd/system/sshd.service{,.bak}
[root@localhost ~]# cp -a openssh-8.4p1/contrib/redhat/sshd.init /etc/init.d/sshd
[root@localhost ~]# cp -a openssh-8.4p1/contrib/redhat/sshd.pam /etc/pam.d/sshd.pam
[root@localhost ~]# chkconfig --add sshd
[root@localhost ~]# systemctl enable sshd --now

4.5、ssh链接成功后的处理

[root@localhost ~]# ssh root@192.168.145.130
`成功连接上之后，可以关闭telnet服务，当然，也可以不关闭`
[root@localhost ~]# systemctl disable xinetd.service --now
[root@localhost ~]# systemctl disable telnet.socket --now
posted @ 2021-01-14 15:34  月巴左耳东  阅读(195)  评论(0)    收藏  举报