SQL Server之存储过程

经典的分页存储过程SQL语句:

Create PROC P_viewPage_A
/*
nzperfect [no_mIss] 高效通用分页存储过程(双向检索) 2007.5.7  QQ:34813284
敬告：适用于单一主键或存在唯一值列的表或视图
ps:Sql语句为8000字节,调用时请注意传入参数及sql总长度不要超过指定范围
*/
@TableName VARCHAR(200),     --表名
@FieldList VARCHAR(2000),    --显示列名，如果是全部字段则为*
@PrimaryKey VARCHAR(100),    --单一主键或唯一值键
@Where VARCHAR(2000),        --查询条件 不含'where'字符，如id>10 and len(userid)>9
@Order VARCHAR(1000),        --排序 不含'order by'字符，如id asc,userid desc，必须指定asc或desc
--注意当@SortType=3时生效，记住一定要在最后加上主键，否则会让你比较郁闷
@SortType INT,               --排序规则 1:正序asc 2:倒序desc 3:多列排序方法
@RecorderCount INT,          --记录总数 0:会返回总记录
@PageSize INT,               --每页输出的记录数
@PageIndex INT,              --当前页数
@TotalCount INT OUTPUT,      --记返回总记录
@TotalPageCount INT OUTPUT   --返回总页数
AS
SET NOCOUNT ON
IF ISNULL(@TotalCount,'') = '' SET @TotalCount = 0
SET @Order = RTRIM(LTRIM(@Order))
SET @PrimaryKey = RTRIM(LTRIM(@PrimaryKey))
SET @FieldList = REPLACE(RTRIM(LTRIM(@FieldList)),' ','')
WHILE CHARINDEX(', ',@Order) > 0 OR CHARINDEX(' ,',@Order) > 0
BEGIN
SET @Order = REPLACE(@Order,', ',',')
SET @Order = REPLACE(@Order,' ,',',')
END
IF ISNULL(@TableName,'') = '' OR ISNULL(@FieldList,'') = ''
OR ISNULL(@PrimaryKey,'') = ''
OR @SortType < 1 OR @SortType >3
OR @RecorderCount  < 0 OR @PageSize < 0 OR @PageIndex < 0
BEGIN
PRINT('ERR_00')
RETURN
END
IF @SortType = 3
BEGIN
IF (UPPER(RIGHT(@Order,4))!=' ASC' AND UPPER(RIGHT(@Order,5))!=' DESC')
BEGIN PRINT('ERR_02') RETURN END
END
DECLARE @new_where1 VARCHAR(1000)
DECLARE @new_where2 VARCHAR(1000)
DECLARE @new_order1 VARCHAR(1000)
DECLARE @new_order2 VARCHAR(1000)
DECLARE @new_order3 VARCHAR(1000)
DECLARE @Sql VARCHAR(8000)
DECLARE @SqlCount NVARCHAR(4000)
IF ISNULL(@where,'') = ''
BEGIN
SET @new_where1 = ' '
SET @new_where2 = ' WHERE  '
END
ELSE
BEGIN
SET @new_where1 = ' WHERE ' + @where
SET @new_where2 = ' WHERE ' + @where + ' AND '
END
IF ISNULL(@order,'') = '' OR @SortType = 1  OR @SortType = 2
BEGIN
IF @SortType = 1
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' ASC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' DESC'
END
IF @SortType = 2
BEGIN
SET @new_order1 = ' ORDER BY ' + @PrimaryKey + ' DESC'
SET @new_order2 = ' ORDER BY ' + @PrimaryKey + ' ASC'
END
END
ELSE
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
END
IF @SortType = 3 AND  CHARINDEX(','+@PrimaryKey+' ',','+@Order)>0
BEGIN
SET @new_order1 = ' ORDER BY ' + @Order
SET @new_order2 = @Order + ','
SET @new_order2 = REPLACE(REPLACE(@new_order2,'ASC,','{ASC},'),'DESC,','{DESC},')
SET @new_order2 = REPLACE(REPLACE(@new_order2,'{ASC},','DESC,'),'{DESC},','ASC,')
SET @new_order2 = ' ORDER BY ' + SUBSTRING(@new_order2,1,LEN(@new_order2)-1)
IF @FieldList <> '*'
BEGIN
SET @new_order3 = REPLACE(REPLACE(@Order + ',','ASC,',','),'DESC,',',')
SET @FieldList = ',' + @FieldList
WHILE CHARINDEX(',',@new_order3)>0
BEGIN
IF CHARINDEX(SUBSTRING(','+@new_order3,1,CHARINDEX(',',@new_order3)),','+@FieldList+',')>0
BEGIN
SET @FieldList =
@FieldList + ',' + SUBSTRING(@new_order3,1,CHARINDEX(',',@new_order3))
END
SET @new_order3 =
SUBSTRING(@new_order3,CHARINDEX(',',@new_order3)+1,LEN(@new_order3))
END
SET @FieldList = SUBSTRING(@FieldList,2,LEN(@FieldList))
END
END
SET @SqlCount = 'SELECT @TotalCount=COUNT(*),@TotalPageCount=CEILING((COUNT(*)+0.0)/'
+ CAST(@PageSize AS VARCHAR)+') FROM ' + @TableName + @new_where1
IF @RecorderCount  = 0
BEGIN
EXEC SP_EXECUTESQL @SqlCount,N'@TotalCount INT OUTPUT,@TotalPageCount INT OUTPUT',
@TotalCount OUTPUT,@TotalPageCount OUTPUT
END
ELSE
BEGIN
SELECT @TotalCount = @RecorderCount
END
IF @PageIndex > CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
SET @PageIndex =  CEILING((@TotalCount+0.0)/@PageSize)
END
IF @PageIndex = 1 OR @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)
BEGIN
IF @PageIndex = 1 --返回第一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order1
END
IF @PageIndex >= CEILING((@TotalCount+0.0)/@PageSize)  --返回最后一页数据
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(ABS(@PageSize*@PageIndex-@TotalCount-@PageSize))
+ ' ' + @FieldList + ' FROM '
+ @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1
END
END
ELSE
BEGIN
IF @SortType = 1  --仅主键正序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order1 +' ) AS TMP) '+ @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 2  --仅主键反序排序
BEGIN
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' < '
+ '(SELECT MIN(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@PageSize*(@PageIndex-1)) + ' ' + @PrimaryKey
+' FROM '+ @TableName
+ @new_where1 + @new_order1 + ') AS TMP) '+ @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ('
+ 'SELECT TOP ' + STR(@PageSize) + ' '
+ @FieldList + ' FROM '
+ @TableName + @new_where2 + @PrimaryKey + ' > '
+ '(SELECT MAX(' + @PrimaryKey + ') FROM (SELECT TOP '
+ STR(@TotalCount-@PageSize*@PageIndex) + ' ' + @PrimaryKey
+ ' FROM ' + @TableName
+ @new_where1 + @new_order2 +' ) AS TMP) '+ @new_order2
+ ' ) AS TMP ' + @new_order1
END
END
IF @SortType = 3  --多列排序，必须包含主键，且放置最后，否则不处理
BEGIN
IF CHARINDEX(',' + @PrimaryKey + ' ',',' + @Order) = 0
BEGIN PRINT('ERR_02') RETURN END
IF @PageIndex <= CEILING((@TotalCount+0.0)/@PageSize)/2  --正向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@PageSize*@PageIndex) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order1 + ' ) AS TMP '
+ @new_order2 + ' ) AS TMP ' + @new_order1
END
ELSE  --反向检索
BEGIN
SET @Sql = 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ 'SELECT TOP ' + STR(@PageSize) + ' ' + @FieldList + ' FROM ( '
+ ' SELECT TOP ' + STR(@TotalCount-@PageSize *@PageIndex+@PageSize) + ' ' + @FieldList
+ ' FROM ' + @TableName + @new_where1 + @new_order2 + ' ) AS TMP '
+ @new_order1 + ' ) AS TMP ' + @new_order1
END
END
END
EXEC(@Sql)
GO

------------------------------------
--用途：分页存储过程(对有主键的表效率极高) 
--说明：
------------------------------------

CREATE PROCEDURE UP_GetRecordByPage
    @tblName      varchar(255),       -- 表名
    @fldName      varchar(255),       -- 主键字段名
    @PageSize     int = 10,           -- 页尺寸
    @PageIndex    int = 1,            -- 页码
    @IsReCount    bit = 0,            -- 返回记录总数, 非 0 值则返回
    @OrderType    bit = 0,            -- 设置排序类型, 非 0 值则降序
    @strWhere     varchar(1000) = ''  -- 查询条件 (注意: 不要加 where)
AS

declare @strSQL   varchar(6000)       -- 主语句
declare @strTmp   varchar(100)        -- 临时变量
declare @strOrder varchar(400)        -- 排序类型

if @OrderType != 0
begin
    set @strTmp = '<(select min'
    set @strOrder = ' order by [' + @fldName +'] desc'
end
else
begin
    set @strTmp = '>(select max'
    set @strOrder = ' order by [' + @fldName +'] asc'
end

set @strSQL = 'select top ' + str(@PageSize) + ' * from ['
    + @tblName + '] where [' + @fldName + ']' + @strTmp + '(['
    + @fldName + ']) from (select top ' + str((@PageIndex-1)*@PageSize) + ' ['
    + @fldName + '] from [' + @tblName + ']' + @strOrder + ') as tblTmp)'
    + @strOrder

if @strWhere != ''
    set @strSQL = 'select top ' + str(@PageSize) + ' * from ['
        + @tblName + '] where [' + @fldName + ']' + @strTmp + '(['
        + @fldName + ']) from (select top ' + str((@PageIndex-1)*@PageSize) + ' ['
        + @fldName + '] from [' + @tblName + '] where ' + @strWhere + ' '
        + @strOrder + ') as tblTmp) and ' + @strWhere + ' ' + @strOrder

if @PageIndex = 1
begin
    set @strTmp =''
    if @strWhere != ''
        set @strTmp = ' where ' + @strWhere

    set @strSQL = 'select top ' + str(@PageSize) + ' * from ['
        + @tblName + ']' + @strTmp + ' ' + @strOrder
end

if @IsReCount != 0
    set @strSQL = 'select count(*) as Total from [' + @tblName + ']'+' where ' + @strWhere

exec (@strSQL)

GO

------------------------------------
--用途：支持任意排序的分页存储过程 
--说明：
------------------------------------

CREATE PROCEDURE UP_GetRecordByPageOrder
 
 @tblName varchar(255),   -- 表名
 @fldName varchar(255),   -- 显示字段名
 @OrderfldName varchar(255),  -- 排序字段名
 @StatfldName varchar(255),  -- 统计字段名
 @PageSize int = 10,   -- 页尺寸
 @PageIndex int = 1,   -- 页码
 @IsReCount bit = 0,   -- 返回记录总数, 非 0 值则返回
 @OrderType bit = 0,   -- 设置排序类型, 非 0 值则降序
 @strWhere varchar(1000) = ''  -- 查询条件 (注意: 不要加 where)
AS

 declare @strSQL varchar(6000)  -- 主语句
 declare @strTmp varchar(100)   -- 临时变量
 declare @strOrder varchar(400)  -- 排序类型

if @OrderType != 0
 begin
  set @strTmp = '<(select min'
  set @strOrder = ' order by [' + @OrderfldName +'] desc'
 end
else
 begin
  set @strTmp = '>(select max'
  set @strOrder = ' order by [' + @OrderfldName +'] asc'
 end

set @strSQL = 'select top ' + str(@PageSize) + ' ' + @fldName + ' from ['
 + @tblName + '] where [' + @OrderfldName + ']' + @strTmp + '(['
 + @OrderfldName + ']) from (select top ' + str((@PageIndex-1)*@PageSize) + ' ['
 + @OrderfldName + '] from [' + @tblName + ']' + @strOrder + ') as tblTmp)'
 + @strOrder

if @strWhere != ''
 set @strSQL = 'select top ' + str(@PageSize) + ' ' + @fldName + ' from ['
 + @tblName + '] where [' + @OrderfldName + ']' + @strTmp + '(['
 + @OrderfldName + ']) from (select top ' + str((@PageIndex-1)*@PageSize) + ' ['
 + @OrderfldName + '] from [' + @tblName + '] where ' + @strWhere + ' '
 + @strOrder + ') as tblTmp) and ' + @strWhere + ' ' + @strOrder

if @PageIndex = 1
 begin
  set @strTmp = ''
  if @strWhere != ''
  set @strTmp = ' where ' + @strWhere

  set @strSQL = 'select top ' + str(@PageSize) + ' ' + @fldName + ' from ['
  + @tblName + ']' + @strTmp + ' ' + @strOrder
 end

if @IsReCount != 0
 set @strSQL = @strSQL+' select count(1) as Total from [' + @tblName + ']'

if @strWhere!=''
 set @strSQL = @strSQL+' where ' + @strWhere
exec (@strSQL)

 

GO