CentOS 部署 Python3 的一些注意事项

环境：centos6.7
https://github.com/vinta/awesome-python
https://github.com/PyMySQL/PyMySQL
https://github.com/kennethreitz/requests
http://flask.pocoo.org/
http://flask-json.readthedocs.org/en/latest/
http://www.pythondoc.com/flask-cache/index.html
# json_data=json.dumps(hqs,cls=__default)
# 安装Nginx
yum -y install gcc gcc-c++ autoconf automake make  zlib zlib-devel openssl openssl--devel pcre pcre-devel
cd /opt
wget http://nginx.org/download/nginx-1.9.14.tar.gz
mkdir nginx
tar zxvf nginx-1.9.14.tar.gz
cd nginx-1.9.14
./configure --prefix=/opt/nginx --with-http_stub_status_module --with-http_gzip_static_module
make && make install

# 启动nginx
/opt/nginx/sbin/nginx

# 拷贝文件至远程主机
scp -r //Users/Irving/Desktop/python/stockhq/ root@139.196.185.215:/opt/
scp -r //Users/Irving/Desktop/python/stockhq/data/ root@139.196.185.215:/opt/stockhq/data/

# 升级python3
yum install gcc zlib-devel make
# 下载python
wget https://www.python.org/ftp/python/3.5.1/Python-3.5.1.tgz
解压缩、编译和安装
tar -zxvf Python-3.5.1.tgz
cd Python-3.5.1
./configure –prefix=/opt/python3
make all
make install
清除之前编译的可执行文件及配置文件。
make clean
清除所有生成的文件
make distclean
查看安装的新版本信息
/opt/python3/bin/python3 -V
做个软连接到当前用户的bin目录(注意：如果已安装了puython2.6 先删除执行 rm -rf /usr/bin/python)
ln -s /opt/python3/bin/python3 /usr/bin/python

升级了默认的python导致报错 File “/usr/bin/yum”, line 30
vim /usr/bin/yum    #将!/usr/bin/python改成!/usr/bin/python2.6即可。
# 安装pip3
ln -s "/opt/python3/bin/pip3" /usr/local/bin/pip3
# 安装包
pip3 install requests pymysql sqlalchemy flask flask_json simplejson
#安装
yum install supervisor
# 查看配置信息

cat /etc/supervisord.conf 
[supervisord]
http_port=/var/tmp/supervisor.sock ; (default is to run a UNIX domain socket server)
;http_port=127.0.0.1:9001  ; (alternately, ip_address:port specifies AF_INET)
;sockchmod=0700              ; AF_UNIX socketmode (AF_INET ignore, default 0700)
;sockchown=nobody.nogroup     ; AF_UNIX socket uid.gid owner (AF_INET ignores)
;umask=022                   ; (process file creation umask;default 022)
logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB       ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10          ; (num of main logfile rotation backups;default 10)
loglevel=info               ; (logging level;default info; others: debug,warn)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false              ; (start in foreground if true;default false)
minfds=1024                 ; (min. avail startup file descriptors;default 1024)
minprocs=200                ; (min. avail process descriptors;default 200)

;nocleanup=true              ; (don't clean up tempfiles at start;default false)
;http_username=user          ; (default is no username (open system))
;http_password=123           ; (default is no password (open system))
;childlogdir=/tmp            ; ('AUTO' child log dir, default $TEMP)
;user=chrism                 ; (default is current user, required if root)
;directory=/tmp              ; (default is not to cd during start)
;environment=KEY=value       ; (key value pairs to add to environment)

[supervisorctl]
serverurl=unix:///var/tmp/supervisor.sock ; use a unix:// URL  for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris              ; should be same as http_username if set
;password=123                ; should be same as http_password if set
;prompt=mysupervisor         ; cmd line prompt (default "supervisor")

; The below sample program section shows all possible program subsection values,
; create one or more 'real' program: sections to be able to control them under
; supervisor.

;[program:theprogramname]
;command=/bin/cat            ; the program (relative uses PATH, can take args)
;priority=999                ; the relative start priority (default 999)
;autostart=true              ; start at supervisord start (default: true)
;autorestart=true            ; retstart at unexpected quit (default: true)
;startsecs=10                ; number of secs prog must stay running (def. 10)
;startretries=3              ; max # of serial start failures (default 3)
;exitcodes=0,2               ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT             ; signal used to kill process (default TERM)
;stopwaitsecs=10             ; max num secs to wait before SIGKILL (default 10)
;user=chrism                 ; setuid to this UNIX account to run the program
;log_stdout=true             ; if true, log program stdout (default true)
;log_stderr=true             ; if true, log program stderr (def false)
;logfile=/var/log/cat.log    ; child log path, use NONE for none; default AUTO
;logfile_maxbytes=1MB        ; max # logfile bytes b4 rotation (default 50MB)
;logfile_backups=10          ; # of logfile backups (default 10)


[root@iZ11fek1j6cZ etc]# cat /etc/supervisord.conf 

[supervisord]
http_port=/var/tmp/supervisor.sock ; (default is to run a UNIX domain socket server)
;http_port=127.0.0.1:9001  ; (alternately, ip_address:port specifies AF_INET)
;sockchmod=0700              ; AF_UNIX socketmode (AF_INET ignore, default 0700)
;sockchown=nobody.nogroup     ; AF_UNIX socket uid.gid owner (AF_INET ignores)
;umask=022                   ; (process file creation umask;default 022)
logfile=/var/log/supervisor/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB       ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10          ; (num of main logfile rotation backups;default 10)
loglevel=info               ; (logging level;default info; others: debug,warn)
pidfile=/var/run/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false              ; (start in foreground if true;default false)
minfds=1024                 ; (min. avail startup file descriptors;default 1024)
minprocs=200                ; (min. avail process descriptors;default 200)

;nocleanup=true              ; (don't clean up tempfiles at start;default false)
;http_username=user          ; (default is no username (open system))
;http_password=123           ; (default is no password (open system))
;childlogdir=/tmp            ; ('AUTO' child log dir, default $TEMP)
;user=chrism                 ; (default is current user, required if root)
;directory=/tmp              ; (default is not to cd during start)
;environment=KEY=value       ; (key value pairs to add to environment)

[supervisorctl]
serverurl=unix:///var/tmp/supervisor.sock ; use a unix:// URL  for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris              ; should be same as http_username if set
;password=123                ; should be same as http_password if set
;prompt=mysupervisor         ; cmd line prompt (default "supervisor")

; The below sample program section shows all possible program subsection values,
; create one or more 'real' program: sections to be able to control them under
; supervisor.

;[program:theprogramname]
;command=/bin/cat            ; the program (relative uses PATH, can take args)
;priority=999                ; the relative start priority (default 999)
;autostart=true              ; start at supervisord start (default: true)
;autorestart=true            ; retstart at unexpected quit (default: true)
;startsecs=10                ; number of secs prog must stay running (def. 10)
;startretries=3              ; max # of serial start failures (default 3)
;exitcodes=0,2               ; 'expected' exit codes for process (default 0,2)
;stopsignal=QUIT             ; signal used to kill process (default TERM)
;stopwaitsecs=10             ; max num secs to wait before SIGKILL (default 10)
;user=chrism                 ; setuid to this UNIX account to run the program
;log_stdout=true             ; if true, log program stdout (default true)
;log_stderr=true             ; if true, log program stderr (def false)
;logfile=/var/log/cat.log    ; child log path, use NONE for none; default AUTO
;logfile_maxbytes=1MB        ; max # logfile bytes b4 rotation (default 50MB)
;logfile_backups=10          ; # of logfile backups (default 10)

# 增加文件
vi /etc/supervisord.conf
[program:stockhq]
command=/opt/stockhq/data/__stockhq.py
directory=/opt/stockhq
autostart=true
autorestart=true
#保存
:qw
# 配置Nginx

#user  nobody;
worker_processes  1;

#error_log  logs/error.log;
#error_log  logs/error.log  notice;
#error_log  logs/error.log  info;

#pid        logs/nginx.pid;


events {
    worker_connections  1024;
}


http {
    include       mime.types;
    default_type  application/octet-stream;

    #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
    #                  '$status $body_bytes_sent "$http_referer" '
    #                  '"$http_user_agent" "$http_x_forwarded_for"';

    #access_log  logs/access.log  main;

    sendfile        on;
    #tcp_nopush     on;

    #keepalive_timeout  0;
    keepalive_timeout  65;

    gzip  on;

    server {
        listen       80;
        server_name  localhost;

        #charset koi8-r;

        #access_log  logs/host.access.log  main;

        # location / {
        #    root   html;
        #    index  index.html index.htm;
        #}
    location / {
                     proxy_set_header X-Real-IP $remote_addr;
                     proxy_set_header HOST $http_host;
                     proxy_set_header X-NginX-Proxy true;
                     proxy_pass http://127.0.0.1:8080;
        }
     location ~*.(js|css)$ {
            root /opt/stockhq/data;
            expires   1h;
        }


    #error_page  404            /404.html;

        # redirect server error pages to the static page /50x.html
        #
        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }

        # proxy the PHP scripts to Apache listening on 127.0.0.1:80
        #
        #location ~ \.php$ {
        #    proxy_pass   http://127.0.0.1;
        #}

        # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
        #
        #location ~ \.php$ {
        #    root           html;
        #    fastcgi_pass   127.0.0.1:9000;
        #    fastcgi_index  index.php;
        #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;
        #    include        fastcgi_params;
        #}

        # deny access to .htaccess files, if Apache's document root
        # concurs with nginx's one
        #
        #location ~ /\.ht {
        #    deny  all;
        #}
    }


    # another virtual host using mix of IP-, name-, and port-based configuration
    #
    #server {
    #    listen       8000;
    #    listen       somename:8080;
    #    server_name  somename  alias  another.alias;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}


    # HTTPS server
    #
    #server {
    #    listen       443 ssl;
    #    server_name  localhost;

    #    ssl_certificate      cert.pem;
    #    ssl_certificate_key  cert.key;

    #    ssl_session_cache    shared:SSL:1m;
    #    ssl_session_timeout  5m;

    #    ssl_ciphers  HIGH:!aNULL:!MD5;
    #    ssl_prefer_server_ciphers  on;

    #    location / {
    #        root   html;
    #        index  index.html index.htm;
    #    }
    #}
}

Tmux是一个终端复用软件，BSD协议发布。一般用于在一个命令行窗口中访问多个命令行会话

#安装：
yum install tmux （apt-get install tmux）
#基本使用
tmux ls # 显示已有tm（C-b s）
tmux attach-session -t name
tmux new-session -s name
tmux new -s name
tmux kill-session -t name

REFER:
http://unix.stackexchange.com/questions/549/tmux-vs-gnu-screen