用过ODAC，SDAC，MyDAC，IBDAC，PgDAC(分别支持Oracle、MSSQL、MYSQL、IB/FB、 PostgreSQL)等都知道，Corelab公司的数据集驱动非常不错，取数非常快，性能稳定。Corelab的DBX驱动也是做的非常不错。相 反，Borland的DBX除了IB驱动做的可以之外，其他的DBX驱动BUG不断，尤其是oracle的驱动。但ODAC，SDAC，IBDAC这些产 品分别只能连接一种数据数据库，不仅增加了用户的消费投入，对多种数据库连接也造成诸多不便！由此，Corelab（后来改名为devart）统一了 ODAC，SDAC，MyDAC，IBDAC，PgDAC，将多种的数据库组件集成在一起，改名为UniDAC。
UniDAC由于融合了多种数据库连接，手动安装有点麻烦。虽然可以用Source目录下的Make.BAT文件，稍改一下delphi不同版本的Bin路径，但我等有点安装delphi控件经验的人，最喜欢直接用DPK文件去安装。安装步骤如下（以D7为参照）：
1、找到source\delphi7目录，所有的DPK文件都在这里。
2、编译DAC 运行包，即dac70.dpk。
3、如果是D6或D7，编译DAC GUI related package，即dacvcl70.dpk。
4、编译DAC运行包，即dcldac70.dpk。
5、如果是D6或D7，编译unidacvcl70.dpk。
6、分别编译驱动包：PG/ORA/MSSQL/MYSQL/IB的驱动包。
7、编译安装UniDAC设计包，即 dclunidac70.dpk。
需要注意的是，
1、UniDAC和ODBC的驱动包有冲突。
2、UniProviders下的驱动包INC文件，诸如IbDac.inc、Odac.inc等，默认不是专业版，请在这些Inc文件中，添加一句 {$DEFINE UNIDACPRO}，避免在运行期中找不到一些特定的文件。
3、DPK文件中的Option似乎有问题，最好是改为OutPut Directory改为空，输出到delphi的默认路径（projects\BPL\），Unit OutPut Directory是指为"."，输出到当前路径下。
4、最后一点也是老生常谈的一点，别忘给IDE的library路径添加UniDAC路径，即Source的路径。
Universal Data Access Components Source Code
Copyright 1997-2010, Devart. All Rights Reserved
There are two ways to compile and install UniDAC for Windows manually.
I. Using IDE
Delphi and C++ Builder for Win32
--------------------------------
Run your IDE and walk through folowing steps:
1) Compile DAC run-time package (dacXX.dpk)
2) Compile DAC GUI related package dacvclXX.dpk
3) Compile DAC design-time package (dcldacXX.dpk)
4) Compile UniDAC run-time package (unidacXX.dpk)
5) Compile UniDAC GUI related package (unidacvclXX.dpk)
If you are going to create CLX applications compile UniDacClx.pas unit separately.
6) Compile and install UniDAC design-time package (dclunidacXX.dpk)
7) Compile providers packages:
oraproviderXX.dpk, msproviderXX.dpk, myproviderXX.dpk, ibproviderXX.dpk,
pgproviderXX.dpk, liteproviderXX.dpk, odbcproviderXX.dpk.
After you have compiled odbcproviderXX.dpk, compile providers that use ODBC:
accessproviderXX.dpk, adsproviderXX.dpk, aseproviderXX.dpk, db2providerXX.dpk.
You can find these packages in
Source\Delphi6\*.dpk - for Delphi 6
Source\CBuilder6\*.bpk - for C++ Builder 6
Source\Delphi7\*.dpk - for Delphi 7
Source\Delphi9\*.dpk - for Delphi 2005
Source\Delphi10\*.dpk - for BDS 2006
Source\Delphi11\*.dpk - for RAD Studio 2007
Source\Delphi12\*.dpk - for RAD Studio 2009
Source\Delphi14\*.dpk - for RAD Studio 2010
Source\Delphi15\*.dpk - for RAD Studio XE
To compile UniDAC based application add UniDAC Source directory path
to the "Library Path".
Delphi for .NET
-----------------
Run your IDE and walk through folowing steps:
1) Compile DAC run-time package (Devart.Dac.dpk)
2) Compile DAC design-time package (Devart.Dac.Design.dpk)
3) Compile UniDAC run-time package (Devart.UniDac.dpk)
4) Compile and install UniDAC design-time package (Devart.UniDac.Design.dpk)
5) Compile providers packages:
Devart.UniDac.Oracle.dpk, Devart.UniDac.SQLServer.dpk, Devart.UniDac.MySQL.dpk,
Devart.UniDac.InterBase.dpk, Devart.UniDac.PostgreSQL.dpk,
Devart.UniDac.SQLLite.dpk, Devart.UniDac.ODBC.dpk.
After you have compiled Devart.UniDac.ODBC.dpk, compile providers that use ODBC:
Devart.UniDac.Access.dpk, Devart.UniDac.Advantage.dpk, Devart.UniDac.ASE.dpk,
Devart.UniDac.DB2.dpk.
6) Specify the path to compiled assembles in "Assembly Search Paths"
You can find these packages in
Source\Delphi9\*.dpk - for Delphi 2005
Source\Delphi10\*.dpk - for BDS 2006
Source\Delphi11\*.dpk - for RAD Studio 2007
To compile UniDAC based application add Devart.Dac and Devart.UniDac to
Namespace prefixes, add UniDAC Source directory path to the "Library Path" list.
II. Using make-files
Delphi and C++ Builder for Win32
--------------------------------
1) Go to one of the following folders (let's denote this folder %MakePath%):
Source\Delphi6 - for Delphi 6
Source\CBuilder6 - for C++ Builder 6
Source\Delphi7 - for Delphi 7
Source\Delphi9 - for Delphi 2005
Source\Delphi10\*.dpk - for BDS 2006
Source\Delphi11\*.dpk - for RAD Studio 2007
Source\Delphi12\*.dpk - for RAD Studio 2009
Source\Delphi14\*.dpk - for RAD Studio 2010
Source\Delphi15\*.dpk - for RAD Studio XE
2) Find in the 'Make.bat' line containing
set IdeDir="D:\Program Files\Borland\Delphi7
and make sure that correct path to IDE is set (always include forward
quote and do not include ending quote)
3) Run 'Make.bat'. Binaries will be copied to %MakePath%\UniDac subfolder
4) Copy %MakePath%\UniDac\*.bpl files to a folder that is included in the
PATH environment variable
5) Run IDE and add dclunidacXX.bpl via Component->Install Packages... menu
6) To compile UniDAC based application add UniDAC Source directory path
to the "Library Path" list
Delphi for .NET
-----------------
1) Go to the following folders (let's denote this folder %MakePath%):
Source\Delphi9\*.dpk - for Delphi 2005
Source\Delphi10\*.dpk - for BDS 2006
Source\Delphi11\*.dpk - for RAD Studio 2007
2) Find in the 'Make.bat' line containing
set IdeDir="D:\Program Files\Borland\BDS\4.0
and make sure that correct path to IDE is set (always include forward
quote and do not include ending quote)
3) Run 'Make.bat'. Binaries will be copied to %MakePath%\UniDac subfolder
4) Run IDE and add Devart.UniDac.Design.dll via Component->Installed
.NET Components->.NET VCL Components->Add... menu. Specify the path to compiled assembles
in Component->Assembly Search Paths->Add... menu
6) To compile UniDAC based application add Devart.Dac and Devart.UniDac to
Tools->Options->Environment Options->Delphi Options->Library->
Namespace prefixes
Copyright 1997-2010, Devart. All Rights Reserved
There are two ways to compile and install UniDAC for Windows manually.
I. Using IDE
Delphi and C++ Builder for Win32
--------------------------------
Run your IDE and walk through folowing steps:
1) Compile DAC run-time package (dacXX.dpk)
2) Compile DAC GUI related package dacvclXX.dpk
3) Compile DAC design-time package (dcldacXX.dpk)
4) Compile UniDAC run-time package (unidacXX.dpk)
5) Compile UniDAC GUI related package (unidacvclXX.dpk)
If you are going to create CLX applications compile UniDacClx.pas unit separately.
6) Compile and install UniDAC design-time package (dclunidacXX.dpk)
7) Compile providers packages:
oraproviderXX.dpk, msproviderXX.dpk, myproviderXX.dpk, ibproviderXX.dpk,
pgproviderXX.dpk, liteproviderXX.dpk, odbcproviderXX.dpk.
After you have compiled odbcproviderXX.dpk, compile providers that use ODBC:
accessproviderXX.dpk, adsproviderXX.dpk, aseproviderXX.dpk, db2providerXX.dpk.
You can find these packages in
Source\Delphi6\*.dpk - for Delphi 6
Source\CBuilder6\*.bpk - for C++ Builder 6
Source\Delphi7\*.dpk - for Delphi 7
Source\Delphi9\*.dpk - for Delphi 2005
Source\Delphi10\*.dpk - for BDS 2006
Source\Delphi11\*.dpk - for RAD Studio 2007
Source\Delphi12\*.dpk - for RAD Studio 2009
Source\Delphi14\*.dpk - for RAD Studio 2010
Source\Delphi15\*.dpk - for RAD Studio XE
To compile UniDAC based application add UniDAC Source directory path
to the "Library Path".
Delphi for .NET
-----------------
Run your IDE and walk through folowing steps:
1) Compile DAC run-time package (Devart.Dac.dpk)
2) Compile DAC design-time package (Devart.Dac.Design.dpk)
3) Compile UniDAC run-time package (Devart.UniDac.dpk)
4) Compile and install UniDAC design-time package (Devart.UniDac.Design.dpk)
5) Compile providers packages:
Devart.UniDac.Oracle.dpk, Devart.UniDac.SQLServer.dpk, Devart.UniDac.MySQL.dpk,
Devart.UniDac.InterBase.dpk, Devart.UniDac.PostgreSQL.dpk,
Devart.UniDac.SQLLite.dpk, Devart.UniDac.ODBC.dpk.
After you have compiled Devart.UniDac.ODBC.dpk, compile providers that use ODBC:
Devart.UniDac.Access.dpk, Devart.UniDac.Advantage.dpk, Devart.UniDac.ASE.dpk,
Devart.UniDac.DB2.dpk.
6) Specify the path to compiled assembles in "Assembly Search Paths"
You can find these packages in
Source\Delphi9\*.dpk - for Delphi 2005
Source\Delphi10\*.dpk - for BDS 2006
Source\Delphi11\*.dpk - for RAD Studio 2007
To compile UniDAC based application add Devart.Dac and Devart.UniDac to
Namespace prefixes, add UniDAC Source directory path to the "Library Path" list.
II. Using make-files
Delphi and C++ Builder for Win32
--------------------------------
1) Go to one of the following folders (let's denote this folder %MakePath%):
Source\Delphi6 - for Delphi 6
Source\CBuilder6 - for C++ Builder 6
Source\Delphi7 - for Delphi 7
Source\Delphi9 - for Delphi 2005
Source\Delphi10\*.dpk - for BDS 2006
Source\Delphi11\*.dpk - for RAD Studio 2007
Source\Delphi12\*.dpk - for RAD Studio 2009
Source\Delphi14\*.dpk - for RAD Studio 2010
Source\Delphi15\*.dpk - for RAD Studio XE
2) Find in the 'Make.bat' line containing
set IdeDir="D:\Program Files\Borland\Delphi7
and make sure that correct path to IDE is set (always include forward
quote and do not include ending quote)
3) Run 'Make.bat'. Binaries will be copied to %MakePath%\UniDac subfolder
4) Copy %MakePath%\UniDac\*.bpl files to a folder that is included in the
PATH environment variable
5) Run IDE and add dclunidacXX.bpl via Component->Install Packages... menu
6) To compile UniDAC based application add UniDAC Source directory path
to the "Library Path" list
Delphi for .NET
-----------------
1) Go to the following folders (let's denote this folder %MakePath%):
Source\Delphi9\*.dpk - for Delphi 2005
Source\Delphi10\*.dpk - for BDS 2006
Source\Delphi11\*.dpk - for RAD Studio 2007
2) Find in the 'Make.bat' line containing
set IdeDir="D:\Program Files\Borland\BDS\4.0
and make sure that correct path to IDE is set (always include forward
quote and do not include ending quote)
3) Run 'Make.bat'. Binaries will be copied to %MakePath%\UniDac subfolder
4) Run IDE and add Devart.UniDac.Design.dll via Component->Installed
.NET Components->.NET VCL Components->Add... menu. Specify the path to compiled assembles
in Component->Assembly Search Paths->Add... menu
6) To compile UniDAC based application add Devart.Dac and Devart.UniDac to
Tools->Options->Environment Options->Delphi Options->Library->
Namespace prefixes
