I/O requests taking longer than 15 seconds to complete on file I/O瓶颈问题
I/O requests taking longer than 15 seconds to complete on file I/O瓶颈问题
http://mssqlwiki.com/2012/08/27/io-requests-taking-longer-than-15-seconds-to-complete-on-file/
https://blogs.msdn.microsoft.com/sqlsakthi/2011/02/09/troubleshooting-sql-server-io-requests-taking-longer-than-15-seconds-io-stalls-disk-latency/。
http://www.cnblogs.com/lyhabc/p/3720666.html（从分析SQLSERVER ERRORLOG查找错误折射出的工作效率问题）
SQLSERVER HAS ENCOUNTERED 1 OCCURRENCE(S) OF I/O REQUESTS TAKING LONGER THAN 15 SECONDS TO COMPLETE ON FILE[E:\DataBase\bar9115]
上面的错误在2012年的时候开始出现一直到现在
Do you see warnings like one below in your SQL Server error log?
SQL Server has encountered x occurrence(s) of I/O requests taking longer than 15 seconds to complete on file .
The OS file handle is 0x000006A4. The offset of the latest long I/O is: 0x00000
(or)
BobMgr::GetBuf: Sort Big Output Buffer write not complete after n seconds.
This indicates SQL Server I/O Bottlenecks. SQL Server performance highly relies on the Disk performance. SQL Server I/O Bottleneck can be identified through
1. PAGEIOLATCH_xx or WRITELOG wait types in Sys.Sysprocesses and other DMV’s
2. I/O taking longer than 15 seconds in SQL Server Error log.
{
SQL Server has encountered X occurrence(s) of I/O requests taking longer than 15 seconds to complete on file [ ] in database [IOTEST (7). The OS file handle is 0x000006A4. The offset of the latest long I/O is:
0x000001
}
3. By looking at I/O latch wait statistics in sys.dm_os_wait_stats
{
Select wait_type, waiting_tasks_count, wait_time_ms from sys.dm_os_wait_stats where wait_type like ‘PAGEIOLATCH%’
order by wait_type
}
4. By looking at pending I/O requests and isolating the disks,File and database in which we have I/O Bottleneck.
{
select database_id, file_id, io_stall, io_pending_ms_ticks, scheduler_address from sys.dm_io_virtual_file_stats(NULL, NULL)t1, sys.dm_io_pending_io_requests as t2
where t1.file_handle = t2.io_handle
}
Following are common reasons for I/O Bottleneck in SQL Server.
1. SQL Server is spawning more I/O requests than what I/O disk subsystem could handle.
2 . There could be an Issue with I/O subsystem (or) driver/firmware issue (or) Misconfiguration in I/O Subsystem (or) Compression and so the Disks are performing very slow and hence SQL Server is affected.
3. Some other process on the system is saturating the disks with I/O requests. Common application includes AV Scan,System Backup Etc. So I/O requests posted by SQL Server becomes slow.
How to troubleshoot?
1. Exclude SQL Server files from antivirus scan.
2. Do not place SQL Server FILES on compressed drives.
3. Distribute SQL Server data files and transaction log files across drives.
4. If the “I/O request taking longer” warning is for tempdb , Enable trace flag 1118 and increase the tempdb data files refer:http://support.microsoft.com/kb/2154845
5. If none of the above resolves the issue collect the below perfmon counters.
Perfmon counters can help us in understanding “If disk is slow” or “SQL Server is spawning more I/O then what disk could handle” or “Some other process is saturating disk with I/O”
Note:It is important to get throughput of the disk subsystem in MB/SEC before we look at disk counters. Normally it will be more than 150 MB for SAN disk and greater 50 MB for Single disk .When you look at the perfmon counter look at Max value.
Avg. Disk sec/Transfer –> Time taken to perform the I/O operation
Ideal value for Disk sec/Transfer is 0.005-0.010 sec. If you consistently notice this counter is beyond 0.015 then there is a serious I/O bottleneck.
1. Look for Disk Bytes /sec when Avg. Disk sec/Transfer is greater than 0.015. If it is below 200 MB for SAN disk and Below 50 MB for Single disk then the problem is with I/O subsystem Engage hardware vendor.
2. If the Disk Bytes /sec is greater than 200 MB for SAN disk or greater than 50 MB for Single disk when the Avg. Disk sec/Transfer is greater than 0.015. Look at theProcess:IO Data Bytes/Sec for the same time and identify which process is spawning I/O. If the identified process is not SQL Server involve the team which supports that process. If the the identified process is SQL Server tune SQL Server queries which are I/O intensive by creating dropping indexes etc.
Disk Bytes /sec –> Total read and write to disk per second in bytes.
Collect the values for each logical disks in which SQL Server files are placed and look at the Max value for this counter ideally it has to be greater than the throughput of the disk subsystem. If you don’t have the throughput for the disk then this value to be greater than 200MB for SAN or greater than 50 MB for single disk.
If it is below the expected value you can consider that your disks are not performing well. Involve the hardware vendor.
Important: Value for this counter will be low when there is no I/O happening on the drives. So you have to look at the this counter during the time you see I/O warnings or When Disk sec/Transfer >0.010 for the same drive.
Process:IO Data Bytes/Sec –> Total read and write to disk per second in bytes by each process.
Collect this counter for all the processes running on the server. This counter will help us understand if any other process is saturating the disk with excessive I/O.
Example: Let us consider a disk with max throughput of 250MB per second. If antivirus is spawning 200MB of I/O per second and if SQL Server data files are placed in same drive and SQL Server is spawning 150MB obviously there will be I/O waits.
Buffer Manager: Page Read/sec + Page Writes/sec –>Total read and write to disk per second in bytes by SQL Server process.
Note: If you are analyzing the .BLG file collected and not live perfmon focus on Maximum value for each counter don’t look at average.
If (Avg. Disk sec/Transfer> ==0.015 ) and ( (Disk Bytes /sec < 150MB (For San)) or (Disk Bytes /sec < 50MB (For Local) or (Disk Bytes /sec < Speed of disk as per Vendor ))
{
There is Issue with I/O subsystem (or) driver/firmware issue (or) Misconfiguration in I/O Subsystem.
}
If (Disk sec/Transfer > ==0.015 Consistently) and ( (Disk Bytes /sec >= 150 (For San)) or (Disk Bytes /sec >= 50MB (For Local) or (Disk Bytes /sec >= Speed of disk as per Vendor ))
{
Identify the process which is posting excessive I/O request using Process:IO Data Bytes/Sec.
If ( Identified process == SQLServer.exe )
{
Identify and tune the queries which is Spawning excessive I/O.
(Reads+Writes column in profiler, Dashboard reports or sys.dm_exec_query_stats and sys.dm_exec_sql_text
can be used to identify the query). Use DTA to tune the query
}
If ( Identified process != SQLServer.exe )
{
Engage the owner of application which is spawning excessive I/O
}
}
Many thanks to Joseph Pilov from whom I learned many techniques like the one above.
If you liked this post, do like us on FaceBook at https://www.facebook.com/mssqlwiki and join our FaceBook grouphttps://www.facebook.com/mssqlwiki#!/groups/454762937884205/
SQL Server has encountered 64 occurrence(s) of I/O requests taking longer than 15 seconds to complete on file [D:XXX in database id 7. The OS file handle is 0x00000000000017E8. The offset of the latest long I/O is: 0x0000264a5b2000
https://social.technet.microsoft.com/Forums/zh-CN/058bc090-02b7-4ec3-9c22-3d486a1b2526/sql-server-alwayson-?forum=sqlserverzhchs
I/O请求超过15s，可能是硬盘的延迟，也有可能是I/O请求延迟，这儿有一篇博客专门写这一块的，你可以看一下：https://blogs.msdn.microsoft.com/sqlsakthi/2011/02/09/troubleshooting-sql-server-io-requests-taking-longer-than-15-seconds-io-stalls-disk-latency/。
每个调度器cpu scheduler（dm_os_schedulers）都会维护一个列表来记录每次上下文切换的时候I/O挂起是否完成，如果一个I/O pending超过了15s，就会把计数器加一，后台线程每五分钟将这些超过15s的I/O pending写入日志
troubleshoot的方向大概就三点，Disk latency, stuck I/O 或者 stalled I/O
首先先用下面的查询看看I/O pending的数目是多少：
SELECT SUM(pending_disk_io_count) AS [Number of pending I/Os] FROM sys.dm_os_schedulers
然后用SELECT * FROM sys.dm_io_pending_io_requests获取详细的数据。
接着用下面语句判断具体哪儿出现了问题。
SELECT DB_NAME(database_id) AS [Database],[file_id], [io_stall_read_ms],[io_stall_write_ms],[io_stall] FROM sys.dm_io_virtual_file_stats(NULL,NULL)
你可以仔细阅读一下上面给出的博客，非常详细，你可以按照他的步骤一步一步找出问题所在。
Sync IOs in nonpreemptive mode longer than 1000 ms
在SQL Server里面一般有两种I/O，同步IO，异步IO
There are two general types of I/O performed by SQL Server.
Async – Vast majority of SQL Server I/Os, as outlined in the provided link: https://technet.microsoft.com/en-us/library/aa175396(v=sql.80).aspx
Sync
同步IO调用超过1000ms就会打印日志
总结：磁盘IO性能跟不上导致，建议更换更快的磁盘
参考：https://blogs.msdn.microsoft.com/bobsql/2016/08/17/how-it-works-sync-ios-in-nonpreemptive-mode-longer-than-1000-ms/
