libnfc安装在ubuntu

1，preinstall
$ sudo apt-get install libusb-dev libpcsclite-dev
$ sudo apt-get install libusb-0.1-4 libpcsclite1 libccid pcscd libftdi1

https://libnfc.googlecode.com/files/libnfc-1.7.0.tar.bz2
bunzip2 libnfc-1.7.0.tar.bz2
tar -xvf libnfc-1.7.0.tar
cd libnfc-1.7.0
./configure --with-drivers=all
make clean all
make
sudo make install

sudo cp /usr/local/lib/libnfc.so.5 /usr/lib/libnfc.so.5

sudo mkdir /usr/local/etc/nfc
sudo cp libnfc.conf.sample /usr/local/etc/nfc/libnfc.conf
sudo sed -i 's/#device.name = "microBuilder.eu"/device.name = "imon.bamboo"/' /usr/local/etc/nfc/libnfc.conf
sudo sed -i 's/#device.connstring = "pn532_uart:/dev/ttyUSB0"/device.connstring = "pn532_uart:/dev/ttyUSB1"/' /usr/local/etc/nfc/libnfc.conf

 

---

 

#install MPSSE libraries for NFC and ADXL
sudo apt-get install libftdi-dev
sudo wget http://$SERVER/linux/libmpsse-1.3.tar.gz
sudo tar -xvzf libmpsse-1.3.tar.gz
cd libmpsse-1.3/src
./configure --disable-python && make && sudo make install #install without python

参考解压各种文件命令：

unzip -d acr122u ACR122U_driver_Lnx_Mac10.5_10.6_1.02_P.zip
tar -jxvf acsccid-1.0.2.tar.bz2
tar xfvz libnfc-1.4.2.tar.gz

 

查看usb连接：

root@user-virtual-machine:~# dmesg | grep tty
[ 0.000000] console [tty0] enabled
[ 2.747496] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.846135] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.180059] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.203997] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[393056.899004] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB0
[393056.901434] usb 1-1: FTDI USB Serial Device converter now attached to ttyUSB1

配置libnfc：

/usr/local/etc/nfc/libnfc.conf

libnfc-1.7.0-rc7/libnfc/drivers/pn532_uart.c

:const uint8_t pn532_wakeup_preamble[] = { 0x55, 0x55, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };

---

/lib/udev/rules.d/69-libmtp.rules

ATTR{idVendor}=="046d", GOTO="libmtp_rules_end" 添加这一行

---

 

---

 

sudo nfc-poll

 nfc-list