Linux内存管理 (4)分配物理页面
专题：Linux内存管理专题
关键词：分配掩码、伙伴系统、水位(watermark)、空闲伙伴块合并。
我们知道Linux内存管理是以页为单位进行的，对内存的管理是通过伙伴系统进行。
从Linux内存管理框架图可知，页面分配器是其他林林总总内存操作的基础。
这也是为什么在介绍了《Linux内存管理 (1)物理内存初始化》、《Linux内存管理 (2)页表的映射过程》、《Linux内存管理 (3)内核内存的布局图》之后，紧接着就要弄明白页面分配器的原因。
1. 重要数据结构
1.1 页面分配掩码
alloc_pages是内核中常用的分配物理内存页面的接口函数，他有两个参数，其中一个就是分配掩码。
include\linux\gfp.h存放了GFP(Get Free Page)分配掩码，分配掩码可以分为两类：以__GFP_开头的分配掩码；以GFP_开头的一般是__GFP_的组合。
__GFP_掩码分为两大类：zone modifiers和action modifiers。
zone modifiers是掩码的低4位，用来指定从那个zone分配页面。
action modifiers定义了分配页面的属性
/* Plain integer GFP bitmasks. Do not use this directly. */ #define ___GFP_DMA 0x01u #define ___GFP_HIGHMEM 0x02u #define ___GFP_DMA32 0x04u #define ___GFP_MOVABLE 0x08u #define ___GFP_WAIT 0x10u #define ___GFP_HIGH 0x20u #define ___GFP_IO 0x40u #define ___GFP_FS 0x80u #define ___GFP_COLD 0x100u #define ___GFP_NOWARN 0x200u #define ___GFP_REPEAT 0x400u #define ___GFP_NOFAIL 0x800u #define ___GFP_NORETRY 0x1000u #define ___GFP_MEMALLOC 0x2000u #define ___GFP_COMP 0x4000u #define ___GFP_ZERO 0x8000u #define ___GFP_NOMEMALLOC 0x10000u #define ___GFP_HARDWALL 0x20000u #define ___GFP_THISNODE 0x40000u #define ___GFP_RECLAIMABLE 0x80000u #define ___GFP_NOTRACK 0x200000u #define ___GFP_NO_KSWAPD 0x400000u #define ___GFP_OTHER_NODE 0x800000u #define ___GFP_WRITE 0x1000000u /* If the above are modified, __GFP_BITS_SHIFT may need updating */
在实际使用中多使用GFP_开头的掩码：
/* This equals 0, but use constants in case they ever change */ #define GFP_NOWAIT (GFP_ATOMIC & ~__GFP_HIGH) /* GFP_ATOMIC means both !wait (__GFP_WAIT not set) and use emergency pool */ #define GFP_ATOMIC (__GFP_HIGH) #define GFP_NOIO (__GFP_WAIT) #define GFP_NOFS (__GFP_WAIT | __GFP_IO) #define GFP_KERNEL (__GFP_WAIT | __GFP_IO | __GFP_FS) #define GFP_TEMPORARY (__GFP_WAIT | __GFP_IO | __GFP_FS | \ __GFP_RECLAIMABLE) #define GFP_USER (__GFP_WAIT | __GFP_IO | __GFP_FS | __GFP_HARDWALL) #define GFP_HIGHUSER (GFP_USER | __GFP_HIGHMEM) #define GFP_HIGHUSER_MOVABLE (GFP_HIGHUSER | __GFP_MOVABLE) #define GFP_IOFS (__GFP_IO | __GFP_FS) #define GFP_TRANSHUGE (GFP_HIGHUSER_MOVABLE | __GFP_COMP | \ __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \ __GFP_NO_KSWAPD) /* * GFP_THISNODE does not perform any reclaim, you most likely want to * use __GFP_THISNODE to allocate from a given node without fallback! */ #ifdef CONFIG_NUMA #define GFP_THISNODE (__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY) #else #define GFP_THISNODE ((__force gfp_t)0) #endif /* This mask makes up all the page movable related flags */ #define GFP_MOVABLE_MASK (__GFP_RECLAIMABLE|__GFP_MOVABLE) /* Control page allocator reclaim behavior */ #define GFP_RECLAIM_MASK (__GFP_WAIT|__GFP_HIGH|__GFP_IO|__GFP_FS|\ __GFP_NOWARN|__GFP_REPEAT|__GFP_NOFAIL|\ __GFP_NORETRY|__GFP_MEMALLOC|__GFP_NOMEMALLOC) /* Control slab gfp mask during early boot */ #define GFP_BOOT_MASK (__GFP_BITS_MASK & ~(__GFP_WAIT|__GFP_IO|__GFP_FS)) /* Control allocation constraints */ #define GFP_CONSTRAINT_MASK (__GFP_HARDWALL|__GFP_THISNODE) /* Do not use these with a slab allocator */ #define GFP_SLAB_BUG_MASK (__GFP_DMA32|__GFP_HIGHMEM|~__GFP_BITS_MASK) /* Flag - indicates that the buffer will be suitable for DMA. Ignored on some platforms, used as appropriate on others */ #define GFP_DMA __GFP_DMA /* 4GB DMA on some platforms */ #define GFP_DMA32 __GFP_DMA32
2. 伙伴系统分配内存
alloc_page-------------------------------分配单页 get_zeroed_page-->__get_free_pages alloc_pages--------------------------分配2^odrder个页面 alloc_pages_node-----------------增加node id参数 __alloc_pages __alloc_pages_node_mask--增加nodemaks参数
__alloc_pages_nodemask is the 'heart' of the zoned buddy allocator.
首先__alloc_pages_nodemask很重要，其次说明了这里的伙伴页面分配器是基于Zone的。
struct alloc_context是伙伴系统分配函数中用于保存相关参数的数据结构。
struct alloc_context {
struct zonelist *zonelist;
nodemask_t *nodemask;
struct zone *preferred_zone;
int classzone_idx;
int migratetype;
enum zone_type high_zoneidx;
};
这里的zonelist，已经通过node_zonelist(nid, gfp_mask)得到：zonelist=NODE_DATA(nid)->node_zonelists+gfp_zonelist(flags)
struct page * __alloc_pages_nodemask(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist, nodemask_t *nodemask) { struct zoneref *preferred_zoneref; struct page *page = NULL; unsigned int cpuset_mems_cookie; int alloc_flags = ALLOC_WMARK_LOW|ALLOC_CPUSET|ALLOC_FAIR; gfp_t alloc_mask; /* The gfp_t that was actually used for allocation */ struct alloc_context ac = { .high_zoneidx = gfp_zone(gfp_mask),----------------------------------gfp_zone根据gfp_mask低4位，找到对应的zone_type。ZONE_NORMAL？ZONE_HIGHMEM？ .nodemask = nodemask, .migratetype = gfpflags_to_migratetype(gfp_mask),--------------------根据gfp_mask得出页面migratetype，是MIGRATE_RECLAIMABLE？MIGRATE_MOVABLE？ }; gfp_mask &= gfp_allowed_mask; lockdep_trace_alloc(gfp_mask); might_sleep_if(gfp_mask & __GFP_WAIT); if (should_fail_alloc_page(gfp_mask, order)) return NULL; /* * Check the zones suitable for the gfp_mask contain at least one * valid zone. It's possible to have an empty zonelist as a result * of GFP_THISNODE and a memoryless node */ if (unlikely(!zonelist->_zonerefs->zone)) return NULL; if (IS_ENABLED(CONFIG_CMA) && ac.migratetype == MIGRATE_MOVABLE) alloc_flags |= ALLOC_CMA; retry_cpuset: cpuset_mems_cookie = read_mems_allowed_begin(); /* We set it here, as __alloc_pages_slowpath might have changed it */ ac.zonelist = zonelist; /* The preferred zone is used for statistics later */ preferred_zoneref = first_zones_zonelist(ac.zonelist, ac.high_zoneidx, ac.nodemask ? : &cpuset_current_mems_allowed, &ac.preferred_zone); if (!ac.preferred_zone) goto out; ac.classzone_idx = zonelist_zone_idx(preferred_zoneref); /* First allocation attempt */ alloc_mask = gfp_mask|__GFP_HARDWALL; page = get_page_from_freelist(alloc_mask, order, alloc_flags, &ac);---------尝试分配物理页面 if (unlikely(!page)) { /* * Runtime PM, block IO and its error handling path * can deadlock because I/O on the device might not * complete. */ alloc_mask = memalloc_noio_flags(gfp_mask); page = __alloc_pages_slowpath(alloc_mask, order, &ac);-----------------如果分配失败，则在这里进行很多特殊场景的处理。 } if (kmemcheck_enabled && page) kmemcheck_pagealloc_alloc(page, order, gfp_mask); trace_mm_page_alloc(page, order, alloc_mask, ac.migratetype); out: /* * When updating a task's mems_allowed, it is possible to race with * parallel threads in such a way that an allocation can fail while * the mask is being updated. If a page allocation is about to fail, * check if the cpuset changed during allocation and if so, retry. */ if (unlikely(!page && read_mems_allowed_retry(cpuset_mems_cookie))) goto retry_cpuset;--------------------------------------------------重试页面分配 return page; }
get_page_from_freelist遍历ac->zonelist中的zone，在里面寻找满足条件的zone，然后找到页面，返回。
static struct page * get_page_from_freelist(gfp_t gfp_mask, unsigned int order, int alloc_flags, const struct alloc_context *ac) { struct zonelist *zonelist = ac->zonelist; struct zoneref *z; struct page *page = NULL; struct zone *zone; nodemask_t *allowednodes = NULL;/* zonelist_cache approximation */ int zlc_active = 0; /* set if using zonelist_cache */ int did_zlc_setup = 0; /* just call zlc_setup() one time */ bool consider_zone_dirty = (alloc_flags & ALLOC_WMARK_LOW) && (gfp_mask & __GFP_WRITE); int nr_fair_skipped = 0; bool zonelist_rescan; zonelist_scan:-------------------------------------------------------------------开始检查ac->zonelist。 zonelist_rescan = false; /* * Scan zonelist, looking for a zone with enough free. * See also __cpuset_node_allowed() comment in kernel/cpuset.c. */ for_each_zone_zonelist_nodemask(zone, z, zonelist, ac->high_zoneidx,--------从zonelist给定的ac->high_zoneidx开始查找，返回的是zone。 ac->nodemask) { ...-----------------------------------------------------------------------------一系列检查条件，不满足跳出当前for循环，进入下一个zone。满足的进入水位检查。 mark = zone->watermark[alloc_flags & ALLOC_WMARK_MASK];-----------------这里的alloc_flags包含ALLOC_WMARK_LOW if (!zone_watermark_ok(zone, order, mark,-------------------------------所以此处会检查zone的低水位，不满足则进行检查，或者尝试zone_reclaim。 ac->classzone_idx, alloc_flags)) { int ret; /* Checked here to keep the fast path fast */ BUILD_BUG_ON(ALLOC_NO_WATERMARKS < NR_WMARK); if (alloc_flags & ALLOC_NO_WATERMARKS) goto try_this_zone; ... ret = zone_reclaim(zone, gfp_mask, order);-------------------------通过zone_reclaim进行一些页面回收 switch (ret) { ...
default: /* did we reclaim enough */ if (zone_watermark_ok(zone, order, mark, ac->classzone_idx, alloc_flags))---------------------再次检查水位是否满足 goto try_this_zone; /* * Failed to reclaim enough to meet watermark. * Only mark the zone full if checking the min * watermark or if we failed to reclaim just * 1<<order pages or else the page allocator * fastpath will prematurely mark zones full * when the watermark is between the low and * min watermarks. */ if (((alloc_flags & ALLOC_WMARK_MASK) == ALLOC_WMARK_MIN) || ret == ZONE_RECLAIM_SOME) goto this_zone_full; continue; } } try_this_zone:---------------------------------------------------------------包括水位各种条件都满足之后，可以在此zone进行页面分配工作。 page = buffered_rmqueue(ac->preferred_zone, zone, order,-------------从zone中进行页面分配工作 gfp_mask, ac->migratetype); if (page) { if (prep_new_page(page, order, gfp_mask, alloc_flags)) goto try_this_zone; return page; } this_zone_full: if (IS_ENABLED(CONFIG_NUMA) && zlc_active) zlc_mark_zone_full(zonelist, z); } /* * The first pass makes sure allocations are spread fairly within the * local node. However, the local node might have free pages left * after the fairness batches are exhausted, and remote zones haven't * even been considered yet. Try once more without fairness, and * include remote zones now, before entering the slowpath and waking * kswapd: prefer spilling to a remote zone over swapping locally. */ if (alloc_flags & ALLOC_FAIR) { alloc_flags &= ~ALLOC_FAIR; if (nr_fair_skipped) { zonelist_rescan = true; reset_alloc_batches(ac->preferred_zone); } if (nr_online_nodes > 1) zonelist_rescan = true; } if (unlikely(IS_ENABLED(CONFIG_NUMA) && zlc_active)) { /* Disable zlc cache for second zonelist scan */ zlc_active = 0; zonelist_rescan = true; } if (zonelist_rescan) goto zonelist_scan; return NULL; }
关于水位的计算在watermark中有详细介绍。
下面看看判断当前zone空闲页面是否满足alloc_flags指定水位的函数__zone_watermark_ok。
z-zone结构体，order待分配页面的阶数，mark水位数值，classzone_idx是zone序号，alloc_flags分配掩码，free_pages当前空闲页面数。
static bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark, int classzone_idx, int alloc_flags, long free_pages) { /* free_pages may go negative - that's OK */ long min = mark; int o; long free_cma = 0; free_pages -= (1 << order) - 1;---------------------------------------------减去待分配页面后剩余页面数，-1？？ if (alloc_flags & ALLOC_HIGH) min -= min / 2; if (alloc_flags & ALLOC_HARDER) min -= min / 4; ... if (free_pages - free_cma <= min + z->lowmem_reserve[classzone_idx])--------空闲页面数要保证大于min值和lowmem_resreve保留值之和 return false; for (o = 0; o < order; o++) {-----------------------------------------------遍历buddy中比当前请求分配order小的所有order，依次检查free pages是否满足watermark需求 /* At the next order, this order's pages become unavailable */ free_pages -= z->free_area[o].nr_free << o;-----------------------------从总free_pages种减去当前order的free pages /* Require fewer higher order pages to be free */ min >>= 1;--------------------------------------------------------------水位值缩半 if (free_pages <= min)--------------------------------------------------在比较是否满足水位需求 return false; } return true;----------------------------------------------------------------以上所有条件都满足，返回True }
函数中循环的目的可归结为：
依次循环，检查内存中是否有足够多的大块（即order比较高）空闲内存。
每次循环处理中，先把当前order的free page从总free pages中减掉，因为我们是看是否有足够多的大块内存。
当然，既然已经把free pages中的一部分已经划掉了，比较标准也应该相应放宽。
放宽多少，就是前面说的对min的右移处理。
zone_reclaim:
int zone_reclaim(struct zone *zone, gfp_t gfp_mask, unsigned int order) { int node_id; int ret; /* * Zone reclaim reclaims unmapped file backed pages and * slab pages if we are over the defined limits. * * A small portion of unmapped file backed pages is needed for * file I/O otherwise pages read by file I/O will be immediately * thrown out if the zone is overallocated. So we do not reclaim * if less than a specified percentage of the zone is used by * unmapped file backed pages. */ if (zone_pagecache_reclaimable(zone) <= zone->min_unmapped_pages && zone_page_state(zone, NR_SLAB_RECLAIMABLE) <= zone->min_slab_pages) return ZONE_RECLAIM_FULL; if (!zone_reclaimable(zone)) return ZONE_RECLAIM_FULL; /* * Do not scan if the allocation should not be delayed. */ if (!(gfp_mask & __GFP_WAIT) || (current->flags & PF_MEMALLOC)) return ZONE_RECLAIM_NOSCAN; /* * Only run zone reclaim on the local zone or on zones that do not * have associated processors. This will favor the local processor * over remote processors and spread off node memory allocations * as wide as possible. */ node_id = zone_to_nid(zone); if (node_state(node_id, N_CPU) && node_id != numa_node_id()) return ZONE_RECLAIM_NOSCAN; if (test_and_set_bit(ZONE_RECLAIM_LOCKED, &zone->flags)) return ZONE_RECLAIM_NOSCAN; ret = __zone_reclaim(zone, gfp_mask, order); clear_bit(ZONE_RECLAIM_LOCKED, &zone->flags); if (!ret) count_vm_event(PGSCAN_ZONE_RECLAIM_FAILED); return ret; }
buffered_rmqueue:
/* * Allocate a page from the given zone. Use pcplists for order-0 allocations. */ static inline struct page *buffered_rmqueue(struct zone *preferred_zone, struct zone *zone, unsigned int order, gfp_t gfp_flags, int migratetype) { unsigned long flags; struct page *page; bool cold = ((gfp_flags & __GFP_COLD) != 0); if (likely(order == 0)) { struct per_cpu_pages *pcp; struct list_head *list; local_irq_save(flags); pcp = &this_cpu_ptr(zone->pageset)->pcp; list = &pcp->lists[migratetype]; if (list_empty(list)) { pcp->count += rmqueue_bulk(zone, 0, pcp->batch, list, migratetype, cold); if (unlikely(list_empty(list))) goto failed; } if (cold) page = list_entry(list->prev, struct page, lru); else page = list_entry(list->next, struct page, lru); list_del(&page->lru); pcp->count--; } else { if (unlikely(gfp_flags & __GFP_NOFAIL)) { /* * __GFP_NOFAIL is not to be used in new code. * * All __GFP_NOFAIL callers should be fixed so that they * properly detect and handle allocation failures. * * We most definitely don't want callers attempting to * allocate greater than order-1 page units with * __GFP_NOFAIL. */ WARN_ON_ONCE(order > 1); } spin_lock_irqsave(&zone->lock, flags); page = __rmqueue(zone, order, migratetype); spin_unlock(&zone->lock); if (!page) goto failed; __mod_zone_freepage_state(zone, -(1 << order), get_freepage_migratetype(page)); } __mod_zone_page_state(zone, NR_ALLOC_BATCH, -(1 << order)); if (atomic_long_read(&zone->vm_stat[NR_ALLOC_BATCH]) <= 0 && !test_bit(ZONE_FAIR_DEPLETED, &zone->flags)) set_bit(ZONE_FAIR_DEPLETED, &zone->flags); __count_zone_vm_events(PGALLOC, zone, 1 << order); zone_statistics(preferred_zone, zone, gfp_flags); local_irq_restore(flags); VM_BUG_ON_PAGE(bad_range(zone, page), page); return page; failed: local_irq_restore(flags); return NULL; }
3. 释放页面
__free_page free_page-->free_pages __free_pages free_hot_cold_page __free_pages_ok
4. 伙伴系统相关节点
4.1 /proc/pagetypeinfo
Page block order: 10 Pages per block: 1024 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 Node 0, zone Normal, type Unmovable 243 105 26 7 2 0 1 0 0 0 0 Node 0, zone Normal, type Reclaimable 1 1 0 2 0 0 0 1 1 1 0 Node 0, zone Normal, type Movable 4 2 3 4 4 2 3 3 2 2 156 Node 0, zone Normal, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Unmovable 1 1 1 0 1 0 0 1 1 1 0 Node 0, zone HighMem, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Movable 1 0 1 0 1 0 1 1 1 0 63 Node 0, zone HighMem, type Reserve 0 0 0 0 0 0 0 0 0 0 1 Node 0, zone HighMem, type CMA 0 0 0 0 0 0 0 0 0 0 0 Node 0, zone HighMem, type Isolate 0 0 0 0 0 0 0 0 0 0 0 Number of blocks type Unmovable Reclaimable Movable Reserve CMA Isolate Node 0, zone Normal 6 19 164 1 0 0 Node 0, zone HighMem 1 0 64 1 0 0
联系方式:arnoldlu@qq.com
