C# 多维数组 交错数组的区别,即 [ , ] 与 [ ][ ]的区别

多维数组的声明

在声明时,必须指定数组的长度,格式为 type [lenght ,lenght ,lengh, ... ]

int [,] test1 = new int [3,3];

 或声明时即赋值,由系统推断长度

int [,] test1 = {
            {1,2,3},
            {1,2,3},
            {1,2,3},
        };

交错数组的声明

声明时,至少需要指定第一维的长度,格式为 type [ ] [ ] [ ] ...

int [][] test1 = new int[5][]; 
int [][] test1 = new int[][];    //注意,此的声明方式是错的

或者声明时即赋值,由系统推断长度 

        int [][] test1 = {
            new int[] {1,2,3,4},
            new int[] {1,2,3},
            new int[] {1,2}
        };

  多维数组与交错数组 二者的相同、区别

两者声明时,都必须指定长度,多维数组必须指定每一维的长度,而交错数组需要至少需要指定第一维的长度。

多维数组声明时,符号是这样的 [ , , , , ],逗号在 方括号 [ ] 中,每一维长度用逗号分隔。而交错数组每一维独立在 [ ]中

当你想指定数组长度时,只能在等号右侧指定,int [,] test1 = new int [3,3] 是正确的 ;int [6,4] test1 = new int [6,4] 是错误的;

下面以代码形式说明

大小不一致的多维数组会发生错误

int [,] test1 = {
            {1,2,3,4},
            {1,2,3},
            {1,2}
        };         //这样是错的,长度必须一致

int [,] test1 = new int [4,5] {
            {1,2,3,4,5},
            {1,2,3},
            {1,2,3}
        };        //这样也是错误的,长度必须一致,必须为每一个位置赋值

            这一点C#与C语言有所区别,C语言可以不全赋值,没有赋值的位置系统默认为0。

下面的方法是正确的

int [,] test1 = {
            {1,2,3},
            {1,2,3},
            {1,2,3}
        };

  初始化交错数组

上面已经说了声明一个交错数组的方法

  int [][] test1 = {
            new int[] {1,2,3,4},     //new int[4] {1,2,3,4}
            new int[] {1,2,3},      //new int[3] {1,2,3}
            new int[] {1,2}
        };

  

  注意,在里面有 new int[],这正是交错数组的特性。交错数组是由数组构成的数组,交错数组要求为内部的每个数组都创建实例。

  即交错数组的每一维都是一个实例,每一个实例为一个数组。

 

数组的长度是固定的

无论多维数组还是交错数组,长度都是固定的,不能随意改变。

 

获取数组的长度

使用 对象.Length 获取数组的长度,需要注意的是,多维数组的长度是每一维相乘,即元素总个数。

 

        int [,] test1 = {
            {1,2,3},
            {1,2,3},
            {1,2,3}
        };
        Console.WriteLine(test1.Length);
 输出为   9

 

而交错数组的长度则是“内部组成的数组的个数”,例如

 

       int [][] test1 = {
            new int[] {1,2,3},
            new int[] {1,2,3},
            new int[] {1,2,3},
        };
        Console.WriteLine(test1.Length);   
输出为 3

 

方法

多维数组、交错数组的方法无差别,都具有Sort()、Clear()等方法,这里不再赘述,关于数组的高级用法,请查阅

https://www.jb51.net/Special/265.htm

 

下列为System.Array类的属性

由于系统提供的方法比较多,有兴趣请查阅

https://docs.microsoft.com/zh-cn/dotnet/api/system.array?view=netframework-4.7.2


使用数组初始化类型

在C#中有 lambda、匿名类等等,C# 5.0/6.0 后,给声明类、声明类型类型、赋值等有了很方便的操作方法。下面举例测试。

例子1

使用数组对集合、集合泛型等初始化

声明一个 List 泛型集合

using System.Collections.Generic;        //头部引入

    //main中的代码
        static void Main(string[] args)
        {
            List<string> list = new List<string>();

            Console.ReadKey();
        }
    

那么,给集合 list 增加一个项,用 Add() 方法

        static void Main(string[] args)
        {
            List<string> list = new List<string>();
            //增加
            list.Add("a");
            list.Add("b");
            list.Add("c");
            list.Add("d");
            list.Add("e");
            list.Add("f");
            list.Add("g");
            Console.ReadKey();
        }

利用 “数组” 来添加新项

List<string> list = new List<string>(){"a","b","c","d","e","f"}; 

List<string> list = new List<string>{"a","b","c","d","e","f"};

//以上两种方法都可以,注意后面有没有 ()

例子2

上面的例子利用数组直接在集合声明时初始化,但是不能很好的声明“骚操作”。

    试试交错数组

  1,在 program  所在的命名空间中写一个类

    public class Test
    {
        public int x;
        public int y;
        public void What()
        {
            Console.WriteLine(x + y);
        }
    }

  2,在 Main 方法中

       static void Main(string[] args)
        {
            List<Test> list = new List<Test>()
            {
                new Test{x=1,y=6},
                new Test{x=8,y=6},
                new Test{x=4,y=8},
                new Test{x=5,y=7},
                new Test{x=3,y=3},
                new Test{x=6,y=6},
                new Test{x=9,y=666},
                new Test{x=7,y=6},
            };
            Console.ReadKey();
        }

完整代码如下

    public class Test
    {
        public int x;
        public int y;
        public void What()
        {
            Console.WriteLine(x + y);
        }
    }
    class Program
    {
        static void Main(string[] args)
        {
            List<Test> list = new List<Test>()
            {
                new Test{x=1,y=6},
                new Test{x=8,y=6},
                new Test{x=4,y=8},
                new Test{x=5,y=7},
                new Test{x=3,y=3},
                new Test{x=6,y=6},
                new Test{x=9,y=666},
                new Test{x=7,y=6},
            };
            Console.ReadKey();
        }
    }

 

由于类引用类型,它的内存是引用地址,不像 int、char等类型,所以在对类(引用类型)使用数组、集合等形式时,可以用 “交错数组” 来理解。

 

posted @ 2018-11-09 17:00  痴者工良  阅读(9616)  评论(4编辑  收藏  举报