NSTimer循环引用的几种解决方案

前言

在iOS中,NSTimer的使用是非常频繁的,但是NSTimer在使用中需要注意,避免循环引用的问题。之前经常这样写:

- (void)setupTimer {
    self.timer = [NSTimer scheduledTimerWithTimeInterval:1 target:self selector:@selector(timerAction) userInfo:nil repeats:YES];
}

- (void)dealloc {
    [self.timer invalidate];
    self.timer = nil;
}
 

由于self强引用了timer,同时timer也强引用了self,所以循环引用造成dealloc方法根本不会走,self和timer都不会被释放,造成内存泄漏。

下面介绍一下几种解决timer循环引用的方法。

1. 选择合适的时机手动释放timer(该方法并不太合理)

在之前自己就是这样解决循环引用的:

  • 控制器中
- (void)viewDidDisappear:(BOOL)animated {
    [super viewDidDisappear:animated];
    
    [self.timer invalidate];
    self.timer = nil;
}

 



  • view中
- (void)removeFromSuperview {
    [super removeFromSuperview];
    
    [self.timer invalidate];
    self.timer = nil;
}

 

 

在某些情况下,这种做法是可以解决问题的,但是有时却会引起其他问题,比如控制器push到下一个控制器,viewDidDisappear后,timer被释放,此时再回来,timer已经不复存在了。

所以,这种"方案"并不是合理的。

 

2. timer使用block方式添加Target-Action

这里我们需要自己在NSTimer的分类中添加类方法:

@implementation NSTimer (BlcokTimer)

+ (NSTimer *)bl_scheduledTimerWithTimeInterval:(NSTimeInterval)interval block:(void (^)(void))block repeats:(BOOL)repeats {
    
    return [self scheduledTimerWithTimeInterval:interval target:self selector:@selector(bl_blockSelector:) userInfo:[block copy] repeats:repeats];
}

+ (void)bl_blockSelector:(NSTimer *)timer {
    
    void(^block)(void) = timer.userInfo;
    if (block) {
        block();
    }
}
@end
 

通过block的方式,获取action,实际的target设置为self,即NSTimer类。这样我们在使用timer时,由于target的改变,就不再有循环引用了。 使用中还需要注意block可能引起的循环引用,所以使用weakSelf:

__weak typeof(self) weakSelf = self;
self.timer = [NSTimer bl_scheduledTimerWithTimeInterval:1 block:^{
     [weakSelf changeText];
} repeats:YES];
 

虽然没有了循环引用,但是还是应该记得在dealloc时释放timer。

3. 给self添加中间件proxy

考虑到循环引用的原因,改方案就是需要打破这些相互引用关系,因此添加一个中间件,弱引用self,同时timer引用了中间件,这样通过弱引用来解决了相互引用,如图:

 

接下来看看怎么实现这个中间件,直接上代码:

@interface ZYWeakObject()

@property (weak, nonatomic) id weakObject;

@end

@implementation ZYWeakObject

- (instancetype)initWithWeakObject:(id)obj {
    _weakObject = obj;
    return self;
}

+ (instancetype)proxyWithWeakObject:(id)obj {
    return [[ZYWeakObject alloc] initWithWeakObject:obj];
}

@interface ZYWeakObject()

@property (weak, nonatomic) id weakObject;

@end

@implementation ZYWeakObject

- (instancetype)initWithWeakObject:(id)obj {
    _weakObject = obj;
    return self;
}

+ (instancetype)proxyWithWeakObject:(id)obj {
    return [[ZYWeakObject alloc] initWithWeakObject:obj];
}

 


仅仅添加了weak类型的属性还不够,为了保证中间件能够响应外部self的事件,需要通过消息转发机制,让实际的响应target还是外部self,这一步至关重要,主要涉及到runtime的消息机制。
/**
 * 消息转发,让_weakObject响应事件
 */
- (id)forwardingTargetForSelector:(SEL)aSelector {
    return _weakObject;
}

- (void)forwardInvocation:(NSInvocation *)invocation {
    void *null = NULL;
    [invocation setReturnValue:&null];
}

- (BOOL)respondsToSelector:(SEL)aSelector {
    return [_weakObject respondsToSelector:aSelector];
}

 



接下来就可以这样使用中间件了:

// target要设置成weakObj,实际响应事件的是self
ZYWeakObject *weakObj = [ZYWeakObject proxyWithWeakObject:self];
self.timer = [NSTimer scheduledTimerWithTimeInterval:1 target:weakObj selector:@selector(changeText) userInfo:nil repeats:YES];
 

结论

经测试,以上两种方案都是可以解决timer的循环引用问题

代码请移步github: Demo  https://github.com/zhouyangyng/timerRetainCycle

 

posted @ 2019-03-26 11:26  鸿鹄当高远  阅读(4245)  评论(0编辑  收藏  举报