编写内核驱动加载工具

一丶加载内核驱动的常用API介绍.

加载内核驱动,使用我们的ring3下的API即可完成.

API分别是:

OpenSCManager 打开设备(服务)管理器

CreateService　　创建服务(或者设备,根据参数不同而不同)

OpenService　　打开设备或者服务.

StartService 启动服务,启动设备.

ControlService 控制设备或者服务的状态.

CloseServiceHandle 关闭服务或者设备的句柄

DeleteService 卸载服务

参数介绍:

1.打开设备管理器

SC_HANDLE OpenSCManager(
  LPCTSTR lpMachineName,   // 机器名称.可以制定计算机,如不指定,给NULL则是打开自己.
  LPCTSTR lpDatabaseName,  // 打开设备管理器数据库的名称,如果为NULL则使用默认的.
  DWORD dwDesiredAccess    // 打开的权限.
);

返回值:

　　成功: 返回设备管理器的句柄

　　失败: 返回NULL

2.创建设备或者服务.

SC_HANDLE CreateService( 
  SC_HANDLE hSCManager,       //设备管理器句柄,通过OpenScManger返回
  LPCTSTR lpServiceName,      // 服务或者设备启动的名称
  LPCTSTR lpDisplayName,      // 服务或者的显示名称
  DWORD dwDesiredAccess,      // 访问服务或者设备的权限
  DWORD dwServiceType,        // 创建的服务或者设备的类型,如果是内核驱动,则通过这里给
  DWORD dwStartType,          // 服务或者设备何时启动
  DWORD dwErrorControl,       // 服务或者设备如果启动出错,则指定一下应用程序应该怎么做,(重启,或者重新长还是.)
  LPCTSTR lpBinaryPathName,   // 服务或者设备的文件路径,必须给.
  LPCTSTR lpLoadOrderGroup,   // 服务或者设备排租.
  LPDWORD lpdwTagId,          // 可以通过注册表来启动服务.
  LPCTSTR lpDependencies,     // array of dependency names
  LPCTSTR lpServiceStartName, // 服务的启动名称. 
  LPCTSTR lpPassword          // 密码;

返回值:

　　成功: 返回创建服务或者设备的句柄.

　　失败: 返回NULL

3.打开服务或者设备.

SC_HANDLE OpenService(
  SC_HANDLE hSCManager,  // 设备管理器的句柄,通过OpenScManger返回.
  LPCTSTR lpServiceName, // 服务或者设备的名称.
  DWORD dwDesiredAccess  // 打开服务或者设备的权限.
);

返回值:

　　成功: 返回服务或者设备的句柄.

　　失败: 返回NULL

4.启动服务或者设备.

BOOL StartService(
  SC_HANDLE hService,            // 服务或者设备句柄
  DWORD dwNumServiceArgs,        // 二维数组的个数.
  LPCTSTR* lpServiceArgVectors   // 二维数组.其中每组存储一个服务名称.如果是内核驱动则都给NULL即可.
);

返回值:

　　成功: 返回非零值

　　失败: 返回零值.

5.控制服务或者设备.

BOOL ControlService(
  SC_HANDLE hService,               // 服务或者设备句柄,通过OpenService或者CreateService返回.
  DWORD dwControl,                  //控制代码. 如果给SERVICE_CONTROL_PAUSE那么服务就会暂停
  LPSERVICE_STATUS lpServiceStatus  // 服务的状态.是一个结构体,操作系统帮你填好.

结构体:

typedef struct _SERVICE_STATUS { 
  DWORD dwServiceType; 　　　　//服务的类型
  DWORD dwCurrentState; 　　　//服务的当前状态,暂停状态还是停止状态....
  DWORD dwControlsAccepted;    //服务的控制码.
  DWORD dwWin32ExitCode; 　　　//服务错误或者停止返回的错误驮
  DWORD dwServiceSpecificExitCode; //服务启动的是否返回的错误代码.
  DWORD dwCheckPoint; 　　　　　//服务开启的是否的用于统计的次数.到达100则启动完成.一般进度条使用
  DWORD dwWaitHint; 
} SERVICE_STATUS, *LPSERVICE_STATUS//给定一个期望值.时间.然后按照时间一点一点的启动.

6.关闭服务句柄.

BOOL CloseServiceHandle(
  SC_HANDLE hSCObject   // 服务或者设备的句柄
);

7.卸载服务

BOOL DeleteService(  SC_HANDLE hService   // handle to service);

二丶详细代码

上面是简单的API介绍.下面则贴出完整的代码.

请注意我这里使用的是MFC编写的. 但是其每个函数不会互相依赖.如果你是拷贝代码.则之间诶拷贝过去就可以使用.

1.安装内核驱动代码

 m_CreateService = CreateService(
        m_ScHand, 
        服务或者设备名称,   //例如: MySystem.sys
        服务或者设备的名称,
        SC_MANAGER_ALL_ACCESS,
        SERVICE_KERNEL_DRIVER,//安装的属性,我这里给的是内核的.所以安装的是内核.
        SERVICE_DEMAND_START,
        SERVICE_ERROR_SEVERE,
        m_EdtPathName,
        NULL,
        NULL,
        NULL,
        NULL,
        NULL);
    if (m_CreateService == NULL)
    {
        ::CloseServiceHandle(m_CreateService);
        ::CloseServiceHandle(m_ScHand);
        ::MessageBox(NULL, TEXT("Sorry Install Drive Fail"), TEXT("Error"), NULL);
        return;
    }
    ::CloseServiceHandle(m_CreateService);
    ::CloseServiceHandle(m_ScHand);
    ::MessageBox(NULL, TEXT("InStall Drive Sucess"), TEXT("Sucess"), NULL);

2.卸载代码

     m_ScHand = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS);
    if (m_ScHand == NULL)
    {
        ::MessageBox(NULL, TEXT("Sorry OpenScManger Fail\r\n"), TEXT("Error"), MB_ICONEXCLAMATION);
        return;
    }
    //open Service
    m_CreateService = OpenService(m_ScHand, m_ServiceName, SERVICE_STOP | DELETE);
    if (m_CreateService == NULL)
    {
        ::MessageBox(NULL, TEXT("Sorry Install Drive Fail"), TEXT("Error"), NULL);
        return;
    }
    BOOL bRet = FALSE;
          bRet = DeleteService(m_CreateService);
         if (!bRet)
         {
             ::CloseServiceHandle(m_CreateService);
             ::CloseServiceHandle(m_ScHand);
             ::MessageBox(NULL, TEXT("Sorry UnInstall Drive Fail"), TEXT("Error"), NULL);
             return;
         }
        

  
     DeleteService(m_CreateService);
    ::CloseServiceHandle(m_CreateService);
    ::CloseServiceHandle(m_ScHand);
    ::MessageBox(NULL, TEXT("UnInstall Drive Sucess"), TEXT("Sucess"), NULL);

3.启动内核驱动的代码

　　m_ScHand = NULL;
    m_CreateService = NULL;
    m_ScHand = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS);
    if (m_ScHand == NULL)
    {
        ::MessageBox(NULL, TEXT("Sorry OpenScManger Fail\r\n"), TEXT("Error"), MB_ICONEXCLAMATION);
        return;
    }
    //open Service
    m_CreateService = OpenService(m_ScHand, m_ServiceName, SERVICE_START);
    if (m_CreateService == NULL)
    {
        ::MessageBox(NULL, TEXT("Sorry Start Drive Fail"), TEXT("Error"), NULL);
        return;
    }

    UpdateData(TRUE);
    BOOL bRet = StartService(m_CreateService,0,NULL); //重要的地方.

    if (bRet == NULL)
    {
        ::CloseServiceHandle(m_CreateService);
        ::CloseServiceHandle(m_ScHand);
        ::MessageBox(NULL, TEXT("Sorry Start Service Fail\r\n"), TEXT("Error"), IDOK);
        return;
    }

    ::CloseServiceHandle(m_CreateService);
    ::CloseServiceHandle(m_ScHand);
    ::MessageBox(NULL, TEXT(" Start Service Sucess\r\n"), TEXT("Sucess"), IDOK);

4..暂停内核驱动.

m_ScHand = NULL;
    m_CreateService = NULL;
    UpdateData(TRUE);
    m_ScHand = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS);  
    SERVICE_STATUS svcsta = { 0 };  
    if (m_ScHand != NULL){  
        SC_HANDLE hService = OpenService(m_ScHand, m_ServiceName, SERVICE_STOP);  
        if (hService != NULL)
        {  
            if (ControlService(m_CreateService, SERVICE_CONTROL_STOP, &svcsta))  
            {  
                CloseServiceHandle(m_CreateService);  
                CloseServiceHandle(m_ScHand);  
                ::MessageBox(NULL, TEXT(" Stop Service Sucess\r\n"), TEXT("Sucess"), IDOK);
                return ;  
            }  
            CloseServiceHandle(m_CreateService);  
            CloseServiceHandle(m_ScHand);  
            ::MessageBox(NULL, TEXT(" Stop Service Fail\r\n"), TEXT("Error"), IDOK);
            return ;  
        }  
        CloseServiceHandle(m_ScHand);  
        return ;  
    }  
    else 
    {
        ::MessageBox(NULL, TEXT(" Stop Service Fail\r\n"), TEXT("Fail"), IDOK);
        return ;  
    }
    return;

完整测试代码:

// InstallDriver.cpp : 定义应用程序的入口点。
//

#include "stdafx.h"
#include "InstallDriver.h"
#include "../../publicstruct.h"

SC_HANDLE m_ScHand;
SC_HANDLE m_CreateService;
CBinString m_ServiceName;
CBinString m_EdtPathName;

//安装驱动


BOOL InstallDriver(CBinString ServiecName,CBinString ServicePathName)
{
    
 
    m_EdtPathName = ServicePathName;
    m_ServiceName = ServiecName; 
    m_ScHand = OpenSCManager(NULL, NULL, SC_MANAGER_ALL_ACCESS);
    if (m_ScHand == NULL)
    {
        //::MessageBox(NULL, TEXT("Open ScManger Fail"), TEXT("Error"), NULL);
        //OutputDebugString(TEXT("打开服务管理器失败"));
        return FALSE;
    }
    m_CreateService = CreateService(
        m_ScHand,
        m_ServiceName.c_str(),
        m_ServiceName.c_str(),
        SC_MANAGER_ALL_ACCESS,
        SERVICE_KERNEL_DRIVER,
        SERVICE_DEMAND_START,
        SERVICE_ERROR_SEVERE,
        m_EdtPathName.c_str(),
        NULL,
        NULL,
        NULL,
        NULL,
        NULL);
    if (m_CreateService == NULL)
    {
        ::CloseServiceHandle(m_CreateService);
       
        //OutputDebugString(TEXT("调用CreateService失败"));

        return FALSE;
    }
    ::CloseServiceHandle(m_CreateService);

    return TRUE;
}


BOOL StartDriver(CBinString ServiceName)
{
    // TODO: Add your control notification handler code here
   
    SC_HANDLE m_CreateService = NULL;
    if (m_ScHand == NULL)
    {
        //OutputDebugString(TEXT("启动驱动: SCM为NULL打开失败"));
        return FALSE;
    }
    //open Service
    m_CreateService = OpenService(m_ScHand, m_ServiceName.c_str(), SERVICE_START);
    if (m_CreateService == NULL)
    {
       
        //OutputDebugString(TEXT("启动驱动: OpenService服务失败"));

        return FALSE;

    }

   
    BOOL bRet = StartService(m_CreateService, 0, NULL);

    if (bRet == NULL)
    {
        ::CloseServiceHandle(m_CreateService);
       
        //OutputDebugString(TEXT("启动驱动: StartService失败"));

        return FALSE;
    }

    ::CloseServiceHandle(m_CreateService);
   
   
    return TRUE;
}

BOOL StopDriver(CBinString ServiceName)
{
    // TODO: Add your control notification handler code here
  
   
   
 
    SERVICE_STATUS svcsta = { 0 };
    if (m_ScHand != NULL) {
        SC_HANDLE hService = OpenService(m_ScHand, m_ServiceName.c_str(), SERVICE_STOP);
        if (hService != NULL)
        {
            if (ControlService(hService, SERVICE_CONTROL_STOP, &svcsta))
            {
                CloseServiceHandle(hService);
               
                
                return TRUE;
            }
            CloseServiceHandle(hService);
            return FALSE; 
        }
      
        return FALSE;
    }
    else
    {
       
        return FALSE;
    }
    return FALSE;


}

BOOL UninstallDriver(CBinString ServiceName)
{
    // TODO: Add your control notification handler code here
  
    if (m_ScHand == NULL)
    {
       
        return FALSE;
    }
    //open Service
    m_CreateService = OpenService(m_ScHand, m_ServiceName.c_str(), SERVICE_STOP | DELETE);
    if (m_CreateService == NULL)
    {
      
        return FALSE;
    }
    BOOL bRet = FALSE;
    bRet = DeleteService(m_CreateService);
    if (!bRet)
    {
        ::CloseServiceHandle(m_CreateService);
        ::CloseServiceHandle(m_ScHand);
       
        return FALSE;
    }



    DeleteService(m_CreateService);
    ::CloseServiceHandle(m_CreateService);
    ::CloseServiceHandle(m_ScHand);
    return TRUE;

}


void LoadDriver(CBinString ServiceName,CBinString ServicePathName)
{
    /*
    1.安装
    2.启动
    3.停止
    4.卸载.
    */
    BOOL bRet = FALSE;
    bRet =  InstallDriver(ServiceName, ServicePathName);
    if (!bRet)
    {
       // OutputDebugString(TEXT("安装驱动失败"));
       
    }
    bRet =  StartDriver(ServiceName);

    if (!bRet)
    {
        //OutputDebugString(TEXT("启动驱动失败"));
        return;
    }

    Sleep(3000);

    bRet = StopDriver(ServiceName);

    if (!bRet)
    {
        //OutputDebugString(TEXT("停止驱动失败"));
        return;
    }

    Sleep(1000);
    bRet = UninstallDriver(ServiceName);
    if (!bRet)
    {
        //OutputDebugString(TEXT("删除驱动失败"));
        return;
    }
}

int APIENTRY wWinMain(_In_ HINSTANCE hInstance,
                     _In_opt_ HINSTANCE hPrevInstance,
                     _In_ LPWSTR    lpCmdLine,
                     _In_ int       nCmdShow)
{
   

    CBinString ServiceName;
    CBinString ServicePathName;
    TCHAR szBuffer[MAX_PATH] = { 0 };
    GetCurrentDirectory(sizeof(TCHAR) * MAX_PATH, szBuffer);
    OutputDebugString(szBuffer);
    ServiceName = TEXT("PassRegister"); //注: 不能有后缀名

    ServicePathName = szBuffer;
    ServicePathName += TEXT("\\");
    ServicePathName.append(ServiceName);//注意必须是路径加文件名 D;\\xx.exe/sys/dll
    ServicePathName.append(TEXT(".sys"));

    OutputDebugString(ServicePathName.c_str());
    
   

    LoadDriver(ServiceName, ServicePathName);
    return 0;
}

测试代码.可拷贝

完整的工程代码资料下载:

　　链接：https://pan.baidu.com/s/1kWoHJZD 密码：osy7

原创不易,转载请注明出处.

posted @ 2018-01-13 23:55 iBinary 阅读(3376) 评论(1) 编辑收藏举报

会员力量，点亮园子希望

刷新页面返回顶部

iBinary

编写内核驱动加载工具

编写内核驱动加载工具

一丶加载内核驱动的常用API介绍.

参数介绍:

1.打开设备管理器

2.创建设备或者服务.

3.打开服务或者设备.

4.启动服务或者设备.

5.控制服务或者设备.

6.关闭服务句柄.

7.卸载服务

二丶详细代码

1.安装内核驱动代码

2.卸载代码

3.启动内核驱动的代码

4..暂停内核驱动.

公告

　　　　　　　　　　　编写内核驱动加载工具