OS8 Startup
root> ... add /var/tmp/jinstall-8.0R1.9-export-signed.tgz
NOTICE: Validating configuration against jinstall-8.0R1.9-export-signed.tgz.
NOTICE: Use the 'best-effort-load' option to match the checks done at boot time.
NOTICE: Use the 'no-validate' option to skip this if desired.
Checking compatibility with configuration
Initializing...
Using jbase-7.4R1.7
Using /var/tmp/jinstall-8.0R1.9-export-signed.tgz
Verified jinstall-8.0R1.9-export.tgz signed by PackageProduction_8_0_0
Using /var/validate/tmp/jinstall-signed/jinstall-8.0R1.9-export.tgz
Using /var/validate/tmp/jinstall/jbundle-8.0R1.9-export.tgz
Checking jbundle requirements on /
Using /var/validate/tmp/jbundle/jbase-8.0R1.9.tgz
Using /var/validate/tmp/jbundle/jkernel-8.0R1.9.tgz
Using /var/validate/tmp/jbundle/jpfe-8.0R1.9.tgz
WARNING: hw.product.model='unknown' using jpfe-M40
Using /var/validate/tmp/jbundle/jdocs-8.0R1.9.tgz
Using /var/validate/tmp/jbundle/jroute-8.0R1.9.tgz
Validating against /config/juniper.conf.gz
Message from syslogd@ at Dec 8 10:53:33 ...
dcd[6748]: /build/ryowo-c/7.4R1.7/src/juniper/sbin/dcd/rtsock/rtsock_current.c:579: insist 'iflp_temp != NULL' failed
Message from syslogd@ at Dec 8 10:53:39 ...
dcd[6753]: /build/ryowo-c/7.4R1.7/src/juniper/sbin/dcd/rtsock/rtsock_current.c:579: insist 'iflp_temp != NULL' failed
Message from syslogd@ at Dec 8 10:53:44 ...
dcd[6819]: /build/ryowo-c/7.4R1.7/src/juniper/sbin/dcd/rtsock/rtsock_current.c:579: insist 'iflp_temp != NULL' failed
mgd: commit complete
Validation succeeded
Installing package '/var/tmp/jinstall-8.0R1.9-export-signed.tgz' ...
Message from syslogd@ at Dec 8 10:53:50 ...
dcd[6894]: /build/ryowo-c/7.4R1.7/src/juniper/sbin/dcd/rtsock/rtsock_current.c:579: insist 'iflp_temp != NULL' failed
Verified jinstall-8.0R1.9-export.tgz signed by PackageProduction_8_0_0
Adding jinstall...
WARNING: This package will load JUNOS 8.0R1.9 software.
WARNING: It will save JUNOS configuration files, and SSH keys
WARNING: (if configured), but erase all other files and information
WARNING: stored on this machine. It will attempt to preserve dumps
WARNING: and log files, but this can not be guaranteed. This is the
WARNING: pre-installation stage and all the software is loaded when
WARNING: you reboot the system.
Saving the config files ...
Installing the bootstrap installer ...
WARNING: A REBOOT IS REQUIRED TO LOAD THIS SOFTWARE CORRECTLY. Use the
WARNING: 'request system reboot' command when software installation is
WARNING: complete. To abort the installation, do not reboot your system,
WARNING: instead use the 'request system software delete jinstall'
WARNING: command as soon as this operation completes.
Saving package file in /var/sw/pkg/jinstall-8.0R1.9-export-signed.tgz ...
Saving state for rollback ...
root>
root>
root> show version
Model: olive
JUNOS Base OS boot [7.4R1.7]
JUNOS Base OS Software Suite [7.4R1.7]
JUNOS Kernel Software Suite [7.4R1.7]
JUNOS Packet Forwarding Engine Support (M20/M40) [7.4R1.7]
JUNOS Routing Software Suite [7.4R1.7]
JUNOS Online Documentation [7.4R1.7]
root>
root>
root>
root>
root>
root> request system reboot
Reboot the system ? [yes,no] (no) yes
Shutdown NOW!
Reboot consistency check bypassed - jinstall 8.0R1.9 will complete installation upon reboot
[pid 7376]
root>
*** FINAL System shutdown message from root@ ***
System going down IMMEDIATELY
[1] 2931
Dec 8 10:55:28 init: syslogd (PID 2511) exited with status=0 Normal Exit
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 4
done
Uptime: 4m35s
ata0: Spinning down devices. Please wait...
ata2: Spinning down devices. Please wait...
Rebooting...
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 638kB/260032kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(builder@yamnahar.juniper.net, Fri Aug 11 15:53:26 GMT 2006)
Loading /boot/defaults/loader.conf
/boot/installer text=0x242153 data=0x2a158+0x2e226 syms=[0x4+0x39150+0x4+0x43f7a]
-
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [installer]...
Olive CPU
Copyright (c) 1996-2001, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 8.0R1.9 #0: 2006-08-11 15:56:28 UTC
builder@yamnahar.juniper.net:/build/yamnahar-c/8.0R1.9/obj-i386/sys/compile/MFS
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1750171158 Hz
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1750.17-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
real memory = 268435456 (262144K bytes)
sio0: gdb debugging port
avail memory = 253173760 (247240K bytes)
Preloaded elf kernel "installer" at 0xc07bf000.
Preloaded md_image "/boot/mdimg" at 0xc07bf0a0.
DEVFS: ready for devices
md0: Preloaded image </boot/mdimg> 3823616 bytes at 0xc04185b4
md1: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 9
smb0: <Intel 82371AB SMB controller> port 0x1040-0x104f at device 7.3 on pci0
smb0: controller initialization failed
pci cmd reg = 0x0001, SMB host conf = 0x00
pci0: <VGA-compatible display device> at 15.0
pci0: <unknown card> (vendor=0x1000, dev=0x0030) at 16.0 irq 11
pci0: <unknown card> (vendor=0x8086, dev=0x100f) at 17.0 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x100f) at 18.0 irq 9
pci0: <unknown card> (vendor=0x8086, dev=0x100f) at 19.0 irq 5
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 20.0 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
fdc0: <Intel 82077 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
DEVFS: ready to run
ad0: 3071MB <VMware Virtual IDE Hard Drive> [6241/16/63] at ata0-master UDMA33
ata1-master: <VMware Virtual IDE CDROM Drive/00000001> CDROM device - NO DRIVER!
Mounting root from cd9660:/dev/md0c
Disabling watchdog
=================== Bootstrap installer starting ===================
Initialized the environment
Routing engine model is Olive
Discovered that flash disk = , hard disk = ad0
Disk to install is ad0
Using 128Mb for /tmp
Warning: Block size restricts cylinders per group to 94.
Setting ospackage=jboot-8.0R1.9.tgz, configpackage=configs-8.0R1.9.tgz
Setting packlist=jbundle-8.0R1.9-export.tgz
Setting isupgrade=jboot-8.0R1.9.tgz
Packages and configurations copied to /tmp
Cleaning up ad0...
Running newfs on ad0s1a...
Warning: Block size restricts cylinders per group to 96.
Warning: 3612 sector(s) in last cylinder unallocated
/dev/ad0s1a: 225764 sectors in 56 cylinders of 1 tracks, 4096 sectors
110.2MB in 1 cyl groups (96 c/g, 192.00MB/g, 14080 i/g)
super-block backups (for fsck -b #) at:
32
Running newfs on ad0s1e...
Warning: Block size restricts cylinders per group to 106.
Warning: 3588 sector(s) in last cylinder unallocated
/dev/ad0s1e: 25084 sectors in 7 cylinders of 1 tracks, 4096 sectors
12.2MB in 1 cyl groups (106 c/g, 212.00MB/g, 1664 i/g)
super-block backups (for fsck -b #) at:
32
Installing disk label on ad0
Installing JUNOS on ad0...
Adding jbase...
Mounted jbase on /mnt/packages/mnt/jbase (/dev/vn0)
Adding jbundle-8.0R1.9-export.tgz...
Requested space: 310237380 bytes, free space: 1604079616 bytes in /var/tmp/instmp.zQD8gx
Running requirements file first for jbundle-8.0R1.9-export..
Running pre-install for jbundle-8.0R1.9-export..
extract: Package name is jbundle-8.0R1.9-export
extract: CWD to .
Running post-install for jbundle-8.0R1.9-export..
Verified SHA1 checksum of jbase-8.0R1.9.tgz
Verified SHA1 checksum of jboot-8.0R1.9.tgz
Verified SHA1 checksum of jdocs-8.0R1.9.tgz
Verified SHA1 checksum of jkernel-8.0R1.9.tgz
Verified SHA1 checksum of jpfe-8.0R1.9.tgz
Verified SHA1 checksum of jroute-8.0R1.9.tgz
Verified SHA1 checksum of pkgtools.tgz
Adding jkernel...
Adding jpfe...
WARNING: hw.product.model='unknown' using jpfe-M40
Adding jdocs...
Adding jroute...
Restoring backed up configurations...
Unmounted /mnt/packages/mnt/jbase
machdep.bootsuccess: 0 -> 0
->
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks...
done
Uptime: 59s
ata0: Spinning down devices. Please wait...
ata1: Spinning down devices. Please wait...
Rebooting...
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS 638kB/260032kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.8
(builder@yamnahar.juniper.net, Fri Aug 11 15:53:26 GMT 2006)
Loading /boot/defaults/loader.conf
/kernel text=0x4a22bf data=0x3bd38+0x587a6 syms=[0x4+0x58c30+0x4+0x68379]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [kernel]...
Olive CPU
Copyright (c) 1996-2001, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 8.0R1.9 #0: 2006-08-11 16:25:40 UTC
builder@yamnahar.juniper.net:/build/yamnahar-c/8.0R1.9/obj-i386/sys/compile/JUNIPER
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1732596852 Hz
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1732.60-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS>
real memory = 268435456 (262144K bytes)
sio0: gdb debugging port
avail memory = 253607936 (247664K bytes)
Preloaded elf kernel "kernel" at 0xc06fa000.
DEVFS: ready for devices
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 9
smb0: <Intel 82371AB SMB controller> port 0x1040-0x104f at device 7.3 on pci0
smb0: controller initialization failed
pci cmd reg = 0x0001, SMB host conf = 0x00
pci0: <VGA-compatible display device> at 15.0
pci0: <unknown card> (vendor=0x1000, dev=0x0030) at 16.0 irq 11
em0: <Intel(R) PRO/1000 Network Connection Version - 3.1.10> port 0x1450-0x1457 mem 0xe8800000-0xe880ffff,0xe8840000-0xe885ffff irq 10 at device 17.0 on pci0
em0: Memory Access and/or Bus Master bits were not set!
em0: Speed:1000 Mbps Duplex:Full
em1: <Intel(R) PRO/1000 Network Connection Version - 3.1.10> port 0x1458-0x145f mem 0xe8810000-0xe881ffff,0xe8860000-0xe887ffff irq 9 at device 18.0 on pci0
em1: Memory Access and/or Bus Master bits were not set!
em1: Speed:1000 Mbps Duplex:Full
em2: <Intel(R) PRO/1000 Network Connection Version - 3.1.10> port 0x1460-0x1467 mem 0xe8820000-0xe882ffff,0xe8880000-0xe889ffff irq 5 at device 19.0 on pci0
em2: Memory Access and/or Bus Master bits were not set!
em2: Speed:1000 Mbps Duplex:Full
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 20.0 irq 11
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcafff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
fdc0: <Intel 82077 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1: configured irq 5 not in bitmap of probed irqs 0
sio2 at port 0x2f8-0x2ff irq 3 on isa0
sio2: type 16550A
sio3: configured irq 7 not in bitmap of probed irqs 0
em2: bus=0, device=19, func=0, Ethernet address 00:0c:29:2f:13:0d
em1: bus=0, device=18, func=0, Ethernet address 00:0c:29:2f:13:03
em0: bus=0, device=17, func=0, Ethernet address 00:0c:29:2f:13:f9
DEVFS: ready to run
if_pfe_ls_attach: Initializing bundle control block list.
ad0: 3071MB <VMware Virtual IDE Hard Drive> [6241/16/63] at ata0-master UDMA33
ata1-master: <VMware Virtual IDE CDROM Drive/00000001> CDROM device - NO DRIVER!
Mounting root from ufs:/dev/ad0s1a
if_pfe_open: listener socket opened, listening...
Mounted jbase package on /dev/vn0...
Verified manifest signed by PackageProduction_8_0_0
Verified jboot signed by PackageProduction_8_0_0
Mounted jkernel package on /dev/vn1...
Verified manifest signed by PackageProduction_8_0_0
Mounted jpfe package on /dev/vn2...
Mounted jdocs package on /dev/vn3...
Verified manifest signed by PackageProduction_8_0_0
Mounted jroute package on /dev/vn4...
Verified manifest signed by PackageProduction_8_0_0
Mounted jpfe-common package on /dev/vn5...
swapon: adding /dev/ad0s1b as swap device
Automatic reboot in progress...
/dev/ad0s1a: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 32319 free /dev/ad0s1e: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1e: clean, 6140 free (7 frags, 4039 blocks, 0.0% fragmentation)
(20 frags, 765 blocks, 0.3% fragmentation)
(7 frags, 4039 blocks, 0.0% fragmentation)
/dev/ad0s1f: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1f: clean, 873789 free (157 frags, 109204 blocks, 0.0% fragmentation)
tunefs: soft updates set
Creating initial configuration...mgd: commit complete
Setting initial options: debugger_on_panic=NO debugger_on_break=NO.
Doing initial network setup:
.
Initial interface configuration:
pid 2888 (dcd), uid 0: exited on signal 6 (core dumped)
Abort trap (core dumped)
additional daemons:.
checking for core dump...
savecore: Router rebooting after a normal shutdown....
Additional routing options:.
Doing additional network setup:.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.i386 initialization: microcode kld.
Local package initialization:.
kern.securelevel: -1 -> 1
starting local daemons:.
Fri Dec 8 10:58:49 UTC 2006
Amnesiac (ttyd0)
login: Dec 8 10:58:51 init: product mask 0x1c70000, model 1
Dec 8 10:58:51 init: interface-control (PID 2978) terminated by signal number 6. Core dumped!
Dec 8 10:58:51 init: interface-control (PID 3012) started
root@%
root@% c (ttyd0)
root@%
root@% clit
root>
Message from syslogd@ at Dec 8 10:59:01 ...TC
dcd[3184]: /build/yamnahar-c/8.0R1.9/src/juniper/sbin/dcd/../../../../src/juniper/sbin/dcd/../../../../src/juniper/sbin/dcd/rtsock/rtsock_current.c:590: insist 'iflp_temp != NULL' failed
root> show version
Model: olive
JUNOS Base OS boot [8.0R1.9]
JUNOS Base OS Software Suite [8.0R1.9]
JUNOS Kernel Software Suite [8.0R1.9]
JUNOS Packet Forwarding Engine Support (M20/M40) [8.0R1.9]
JUNOS Routing Software Suite [8.0R1.9]
JUNOS Online Documentation [8.0R1.9]
root> show interfaces tr
Message from syslogd@ at Dec 8 10:59:07 ...
dcd[3256]: /build/yamnahar-c/8.0R1.9/src/juniper/sbin/dcd/../../../../src/juniper/sbin/dcd/../../../../src/juniper/sbin/dcd/rtsock/rtsock_current.c:590: insist 'iflp_temp != NULL' failed
e
error: device tre not found
root> show interfaces terse
Interface Admin Link Proto Local Remote
dsc up up
em0 up up
em1 up up
em2 up up
gre up up
ipip up up
lo0 up up
lo0.16385 up up inet
inet6
lsi up up
mtun up up
pimd up up
pime up up
tap down up
